ELEGOOCarbon Fiber PLA Filament 1.75mm Black 1KG, PLA-CF Strong 3D Printer Filament Dimensional Accuracy +/- 0.02mm, 1kg Cardboard Spool(2.2lbs) for Most FDM 3D Printers

Edit: 4/16/25 - I have to hand it to Elegoo support, they reached out to me on their own (I didn't message them) and offered to send me a replacement spool at no cost to me. I agreed and the new Matte black spool came. Same printer, same settings, and even the same print file in my Octoprint - and let me tell you it was way different this time - it worked. The matte black is lovely and does a great job at hiding the layer lines and making it look very high end/polished.Thank you Elegoo for giving me a chance to try your products again!First time purchasing Elegoo plastic filament. I have had lots of success with their resins for SLA printing, so they were a trustworthy brand. I needed some matte black PLA for some prints where I was trying to minimize the print line visibility without the need for sanding.I have no idea if I had a defective roll, but no matter what I did, I could not get the black matte PLA to melt. I started at the lower end of the temp on the roll (190) and was not able to get anything to come out. I upped it in 5-degree increments until I was at the high end of the temp showed on the roll. I went 10 degrees past that and stopped because I did not want to damage my hot-end.I automatically assumed I had some kind of hardware issue. Maybe my hot end was clogged or the thermistor in my Ender 5 Pro died. I could tell the stepper motor was advancing the filament because I could see the gears turning, but it was just grinding away the plastic, as it couldn't advance the filament because it would not melt.I swapped the hot ends (.4), swapped out the bowden tubing going into the hot end, and checked all sorts of things. After spending hours, I could not get this filament to MELT.Eventually, I swapped it out with another PLA and it had no issues. Swapped it back to the Elegoo matte PLA and couldn't print because it would not melt.This was my first time printing matte PLA, so I thought maybe this stuff is just extremely exotic and hard to print? I have no trouble printing ABS, but maybe this stuff is more hardcore? So, I did some searching and that was not the case. It should just print like any other PLA.I had ordered two rolls - so I opened the other roll, hoping maybe the first roll had some defect and the second roll would not print either. I ended up throwing both away.I purchased a matte black SUNLU roll, half expecting it to also not melt but it had no problems. This has made me nervous to buy Elegoo filament, possibly due to quality control issues. I was looking to buy transparent filament and they have the best price, but I can't bring myself to buy it. I already threw away $30 worth of filament. I don't want to throw away another $17. I have no problems recommending their resins, but I would be worried about buying filament again.

Filament prints great on my Bambu Labs X1C at default settings. While some filaments tend to get shiny when run at lower speeds, this filament stayed matte at both fast and low speeds. Very consistent look. First time using filament from ELEGOO and am very impressed. Will buy more.I dried the filament in a dehydrator for 10 hours before first use. I recorded the weight before and after drying and it only dropped 4 grams over 10 hours. So basically minimal which means it was already dry and I could have printed with it right away and avoided the drying. Again, impressed with this brand.

I go through black faster than any other filament and as someone who needs a cost effective, high quality, black filament, I only order these 4 packs now because they're perfect! Excellent quality and super affordable!

Great Print Quality and Awesome Matte FinishI’ve been using the ELEGOO Matte PLA and I’m really impressed with it. The print quality is super clean — no stringing, no clogging, and everything comes out looking sharp and detailed.What I love most is the matte finish. It gives the prints a smooth, professional look that really stands out, especially compared to regular shiny PLA. The color is rich and consistent too, which makes a big difference in the final result.Definitely one of my go-to filaments now. Highly recommend it if you’re looking for great quality and a nice finish right off the printer.

Great Matt Colors. This pack is great! The Red ia beautiful bold red with a matt finish, same with the blue. This set pairs really well with their Yellow and grey colors to make all kinds of things. The red and blue have a very "Mario brothers" type of boldness. they compliment each other great!If you don't have a Bambu Printer with AMS yet, GET ONE! I can' believe I waited so long thinking my Ender was fine.. My ender collects dust now. The Bambu can pump out 3 prints in the time it takes to print 1 print on ender. It truely is the apple or Tesla of printers. The AMS is rad. I printed this Gunddam in 4 plates about (7 hours). Bambu splicer does all the splitting and organizing of plates and even features different sliced connection options, for glue or lego type construction without glue. OKay i've said my peace.

I normally roll with Polymaker but when I had some Easter projects needing pastels, I chose this multi-color pack mostly based on price. In the end, I ended up being really surprised with the quality also. The material was perfect out of the box and printed very well. Also, the cardboard spool is probably the best I've ever encountered. The edges of the spool are thicker than Polymaker and also sealed with something that's a little grippy also. Runs nice and clean in the Bambu AMS. Polymaker on left, Elegoo on right. Will look to this brand again!

Great price and great product. Very happy with my purchase and will order again. Very little issue with stringing or any print issues. Printing on a creality k2plus printer. > have had plenty of issues with the creality filament that came with my printer. Any issues I've had with my elagoo filament were printer or print file related.

This is very good filament for everyday use. I have gone through multiple rolls and multiple materials/colors. All of them print great, and the wide range of available colors makes it easy to find one that works for you.If you do have any issues with color or print quality, their support is very helpful and tries hard to resolve the issue properly. Overall very happy with the company and product.