ACTIVE Mold Stain Remover Gel Cleaner Heavy Duty Stain Cleaner for Front Loader Washing Machine Seal, Bathroom Grout, Shower, Caulk - Front Load Washer Cleaning Solution - 7 Fl Oz

Our shower is large annd deep and mold grows on the left corners where the shower head is because air circulation is bad. We have had a mold problem for years due to several showers being taken in there every day, the mold could never dry out. I tried bleach, hydrogen peroxide, every type of toxic mold cleaner and it never went away. But it was nasty! So I tried this stuff.First of all, I followed directions to a t! I placed a fan in my shower to really really dry it out. I took the shower brush and scrubbed the dry mold. Then I cleaned it. I dried the whole shower with a towel and let the fan dry it out fully. Then I put on gloves, a mask (you’ll need it- it smells like chlorine!) and eye protectant (just in case, the gel doesn’t splash but there were times when I was squeezing out the bottle that it “farted” and I was glad I was wearing eye gear). The bottle comes with a nozzle that allows you to target specific areas. There is a cap on the nozzle you have to take off. You also have to open the bottle- it’s a foil cover you peel back. Then you point the nozzle at the mold and gently squeeze for the gel to come out. The only trick is not to “scrape” the gel with the tip while squeezing it out- otherwise it moves to the side of the grout and hollows out where you actually want it to go. It took some trial and error to master just having the tip hover above the grout line and not actually touch it, but when I got it, it was pretty easy!!! Then I went to town following all the horrid grout lines. And there were a lot. I’m talking subway tile. I did not have enough of the gel to do the whole thing, but holy cow! You can see where I didn’t put it!!!! I would tap the bottle upside down to make the gel move to the nozzle to make squeezing easier. I used the entire bottle.After I put the gel on, I let it sit for almost 5 hours. It was amazing. The mold was gone underneath the gel. I took a damp cloth and wiped it and the gel had the consistency of dried candle wax and just fell to the floor. I gathered it up and put it in a trash bag. Then I cleaned my shower and let it dry fully overnight. After the gel dries it still smells like chlorine, but after throwing it away there was no remaining smell. I am impressed!!! You can see the areas that I put the gel so clearly, it looks like new tile.Some tips:1. dry the shower fully!!!!! If the mold is wet, it won’t work.2. Don’t let it come in contact with clothes! I had a blob fall on my sweats and I rinsed it with water but it left a little bleached spot.3. Wear eye gear and disposable gloves. The bottle will fart.4. When I picked up the dried gel, I just held it in my hand and slipped off my glove inside out, trapping it in my glove and creating a little pocket for it to be easily put in a trash bag.5. Even the gel can stain! I dropped a dried gel in my rug and it left a tiny bleach mark.6. Be generous with the gel. The areas I didn’t put a lot or did thin lines had some mold spots that did not fully erase.7. Let the gel sit for longer than you think. I had black slimy mold and I left it there for almost 5 hours. It’s gone!!!!8. Trust me. Buy at least 2 bottles. You wont regret it.All in all I am so happy to find this product and am already buying more to finish the grout lines. 100% effective.

Works! Really really well. Had to apply 2 times but completely got rid of very deep black mold stains on rubber gasket in front loader washer. Was going to replace the gasket when I found this. Do not hesitate to buy. Does bleach. Accidentally bleached elbow on a favorite sweatshirt ☹️ bit still worth it. Amazing product. 1000 stars. Don’t forget to drain water and clean filter at the foot of the washer every few months, do a monthly “tub clean cycle with bleach” and wipe down excess water and air out after loads and you are good to go for a fresh smelling/sparkly clean front load washer. A bit of work/ongoing maintenance but I love the energy/water efficiency of a a front loader washer since I live in a desert, so I’m willing to put in the effort on an ongoing basis.

I was very impressed with this product. We have a piece of caulk between the shower and bathroom floor that has been stained and moldy looking since we moved into our home 6 years ago. I have tried everything to clean it off but nothing worked. The directions advise you to let this product sit on the area for 3-5 hours. It goes on very thick (make sure it is not coming out watery/runny because it will not be effective) and it does have a strong smell. I shut the bathroom door and turned the fan on, came back in about 30 minutes and the stain was completely gone. I let it sit a while longer while I cleaned other areas of the house. It came up easily and the caulk is bright white and looks very clean. It feels so much better that the stain is gone as it made me feel like my bathroom was dirty, even when I had cleaned the area countless times! We also used this product on our front loading washing machine and it was mostly effective. That mildew/build up was a bit thicker so I think another treatment would resolve it. Overall this product was very effective and I would recommend it!

This product worked quite well on my washing machine seal to remove mold stains. There was enough product to do the entire seal of one front loading washing machine. It was easy to use. Make sure you wear gloves and have an old toothbrush handy to spread it around into the small grooves. It will ruin your clothes if you spill it so take care to protect your clothing. Expensive product for the small amount, but it does what it is supposed to do.

I bought this product after trying nearly every cleaning product to get rid of what I could only assume was recurrent mold in the caulking of my shower. I did NOT want to get maintenance involved at my apartment complex if I could help it - so I went out on a limb and ordered this product for one final attempt of solving this issue. When I tell you this product worked so well I could've jumped up and down in excitement. It did a PHENOMENAL job removing what I now realize was mold staining, not active mold. I would recommend this product time and time again.

I was honestly surprised at how well this mold stain remover gel worked. I used it first on the rubber seal of my front-loading washing machine, where mold and mildew tend to build up. The thick gel clings right to the surface instead of running off, which gives it time to really work. After letting it sit for a while, most of the dark spots wiped away with minimal scrubbing.I also tried it on the grout in my shower and along the caulking, and it made a big difference there too. It’s strong, so I made sure the area was ventilated, but I didn’t find the scent overwhelming. The nozzle makes it easy to apply right where you need it, and the gel consistency keeps it from dripping everywhere.The only thing to keep in mind is that for really stubborn spots, you might need to repeat the process, but it still saves a lot of scrubbing effort. Given how effective it is and how little product you need each time, I think it’s absolutely worth the price.