TECKWRAP Premium Inkjet T Shirt Heat Transfer Paper A4 x 10 Sheets for Dark or Light Fabric Iron On Transfer Paper 210mm x 297mm

Excellent product and quality

This actually works! Used on cotton T-shirt with normal printer

Printed great all projects I made were turned out better than I thought

Worked well. Had struggled with black T-shirts before but this was perfect.

Glad I did a few test prints to plan out scale and layout first without wasting sheets. Try on the T shirt and mark where you want to place it with masking tape or chalk (I used white pencil eyeliner dots as it what I had ) Also check your printer brushes are clean so there are no colour smudges or bleeds. Tips belowMy tips for getting best results below:Outline shape: Once you are happy with your design, on a separate layer scale up your design from centre then turn the shape into a an outline only, with the shape transparent. That way you have a consistent guideline when cutting it out. I also add small tabs to each corner of design so I can clip it in place.Cutting out: You will need a a craft knife if you plan of cutting out bits and a cutting mat. You can use a smooth bit of scrape cardboard Taped to a chopping board if you don't have a cutting mat. It's easier to cut out shapes with scissors first the go in with a craft knife. For multiple design of on page create small tabs on each corner of design to you can clip it in place.Secure your design: I didn't want to use pin in place. Clipping or taping your design in place before heat setting. Foldback clips, clothes pegs, food bag clips anything you have. Inserted spare cardboard from Amazon boxes into shirt and sleeve lightly stretching the fabric tau. Ironing over any folds or wrinkles may cause cracks in finishClean the printer brush: If your test print has any ink smudges or colour bleed.Heat setting: ironing over a tea towel or baking paper. If you don't own an iron the flat bottom of heated pan or baking tray work best (remember your oven gloves) I had some left over golden gac 900 so after heat setting I brushed on a thin layer and heat set again. No cracks so far after multiple washes.Air dry clothes: Tumble drying may cause design to fade faster,If your design get any cracks: diluting a tiny bit of nail polish remover with water. I used a bottle cap, squeeze out any excess moisture using a cotton bud or brush lightly pat and smooth over any cracks. Wash or switch brush or bud before working on section of a different colour to prevent colour transfer

Fantastic product, long lasting

Used Once,I like it so far.

Printed lovely, but, a pain to peel off and didn't iron on well. Too long and it starts to bubble, not long enough and it comes off. Won't buy again.