Aircove Go | Portable Wi-Fi 6 VPN Router | Protect Unlimited Devices | Free 30-Day ExpressVPN Trial | (U.S. & Canada Version)

I bought this to replace an older Android device that I was using for wifi-to-wifi sharing and I've been very pleased! I was already an ExpressVPN user, so this integrated with my account perfectly. It's USB-C powered and can be plugged into any sufficiently-powered USB-C socket (I *think* PD-20+ is the spec, but I can power it on most of my high-wattage hubs). The killer feature for some is per-device VPNs, which allows you to select which device goes to which endpoint. For personal devices, this is nice because you can offload the VPN computation out to the router and just use the internet like normal. For work devices it's a little less relevant since you're probably on a host-level VPN anyway. I've tested and it works great with streaming devices (Fire TV, etc) for those that need that.For me, the best feature is being able to set-and-forget the Wifi sharing directly over its web interface. Additionally, it has WAN and LAN ethernet ports, so if you find a spot with a hard line, you don't even need to do that. I've also found the transmission antennaes to be great (much further than if using a phone to Wifi share), which probably means the connectivity its making for its wifi uplink will be more solid as well.Overall, a great purchase and a good value.

quality router, but it cannot be remotly controlled , you must be connected to the sale wifi

I bought this router on July 20, 2024. It died yesterday, May 5, 2025. 9.5 months. However, there is some context:1. I have brought this on several trips domestic and international in this time, and it has worked excellent both on flights and in hotels. I bring with me many electronic devices when I travel, and having them connect through this same router and then out to a public WiFi saves a ton of time compared to connecting each one directly to the public WiFi each time I stop.2. The router is actually comprised of two parts: (1) the hardware, which is actually a GL.iNet Slate AX with an ExpressVPN-branded chassis; and (2) the software, which is developed by ExpressVPN.3. The software is easy to use, considerably more so than GL.iNet's default firmware that is more designed for power users. The last version I used, AircoveOS 5.2.3, worked generally fine. The key feature of AircoveOS is native Lightway (ExpressVPN's proprietary VPN protocol), which is faster than OpenVPN and at least as fast as WireGuard, and more importantly, is not blocked in places like airline WiFi. However, there are bugs: I have observed putting connections on the "No VPN" group (i.e., a direct connection to the internet and not through the VPN) would cause some of their packets to drop.4. The hardware, however, leaves some to be desired. This is not my first GL.iNet router, and my experience with GL.iNet hardware is that they are cheaply built and has issues. As is evident, mine had failed in under a year.5. I will add that while I would set it up to run continuously in hotels, the longest it had been running was for a week until recently. Before it died, it was running for 1.5 months at home because my wireless access point was out. One might argue that a travel router isn't designed for extended use, but that is rubbish. It simply is bad hardware design.I would buy it again because I still need an ExpressVPN travel router. I will encourage ExpressVPN to find a better hardware vendor to make their next router.

Five stars because it does what it is supposed to do: use available hotspot and provide VPN protected WiFi connection.But a few things made setup more difficult than necessary. First, there was no paper in the box, so I didn't know I could just scan the QR code to start the set up process (which I found out about on YouTube). Second, it had the older 4.6 firmware, not the newer 4.7 version needed to enable "WiFi-Link" (which is using an available hotspot). That took me sometime to figure out. And then I had to upgrade the firmware manually. Not difficult but one more thing to bother with. Once it had the latest firmware, setup was easy. I have a TPLINK mini router that does the same thing, connecting to an available hotspot (they call it WISP mode), but that model does not deliver VPN protected WiFi.Picture shows Aircove Go providing good service inside a hotel room: VPN-protected internet for all our devices at once.Update 1: It has problems launching the hotel WiFi login page (to enter room number and last name, specifically Marriott Bonvoy hotel room WiFi). Perhaps it performs better for other hotspots. TPLink's WISP-mode, by comparison, reliably launches the sign-in URL. Thus, Aircove's firmware needs work. Since I already have the TPlink Mini Router from before, I simply daisy-chain the Aircove Go to it via a short internet cable (both routers provide it), to have reliable VPN-protected WiFi using the unsecured hotel room hotspot. Meaning, if this is your first router to try to connect to a Marriott hotel room WiFi, it may not work for you.