LASER TREE Laser Module, 40W Optical Output Diode Laser Head Designed for Powerful Cutting, Higher Accuracy Laser Eangraver module with Air Assist, Laser Head for Laser Engraver Machine

Upgraded my k40 with this, and all I can say is "wow, why did if fight this thing so long"I spent hours making all adjustments on my k40 c02 to only have it fail to cut through time and time again. I had upgraded the size to 16x24 so didn't want to trash it, and didn't want to drop $4000 on a new unit. Thought I'd give this a try. Direct hookup to the MG3 upgrade board.

Great upgrade! Best update I ever did to my laser! A cutout that used to take me an hour and 40 minutes now only takes me 22 minutes! Absolute game changer!!

Works like a champ on a CR falcon with some minor modifications to the machine. I had to drill some holes in the machine bracket to accommodate for the new mounting bracket, 3d print a spacer to account for the larger module, and add a switch to turn off the PWM signal entirely when framing a burn job - the framing cross hairs only show when the power is set to 0, but Creality's stock firmware is set to 5, enough to lightly engrave the perimeter on leather or wood with the more powerful module.Make sure to account for the 21mm offset in lightburn if you're sending via Gcode on a sd card, else it'll try going past zero.

I was part way through a laser project when the XTOOL 10W diode laser failed. Read about this one, and took a chance. I am very impressed with the output of this laser. I can now cut 3mm Basswood in one pass at 60-70% power. Prior, I was making 4 to 5 passes at 100% to cut same 3mm Basswood. It is a little heavier and larger than the XTOOL 10W. However, the frame does seem to support it well.

Just installed this on my Falcon CR10 laser engraver (changed from 10watt setup to the K30 laser head)Definitely using the provided power supply. This unit is for DIY machine setups. The included driver board should take care of any connection you need to get this unit going. For the most part it was plug and play with my setup as far as wiring goes. My challenge was mounting the sliding bracket to my existing frame. The provided bracket has more than enough holes and slots to accompany your existing setup. Personally, I found the M5 screw heads wouldn't fit into the slotted sections and the M4 screw heads that i used to attach would not countersink enough to clear the sliding bracket on the head so there were some slight modifications made to make things work.It would have been nice to have some zip ties and maybe a few random fasteners that would work with the provided hardware.Overall i think i made a good purchase. The blue anodized finish matches the Creality frame which was a bonus.One gripe i have thus far is simply having to turn on/off the laser head separately from the gantry but a power strip handles that for now.

K30 with the TTS 600x600mm expansion kit. Works great stability is better than expected.

Delivered on time, came very welled packaged, just as seller described.Unit was easy installed on my Longmill cnc.This unit is way more powerful than my 7 watt.Cuts through ply, MDF, Acrylic, and pine as advertised on web site.I may buy their smaller laser just for engraving tile because this one is a little big.I have cut acrylic key chains, words for crafting, engraved plywood,cut 1/4 ply for a prayer cross.I bought the comgrow Air Assist kit to provide air assist.

Will not work on certain models of xtool and they know it. They said they will send the parts to make it work. Waited almost three weeks and got the wrong parts. They then wanted $40 for the parts which would have taken another week which would have put me out of the return window. I returned it.