Fence Post Repair Kit - Thickened 11-Gauge Steel Anchor & Stakes to Fix Broken/Leaning 4x4/6x6 Wood Post Support (Heavier at 5.47 lbs, 1-Pack)

The media could not be loaded. If you’re like me and you don’t want to have to replace the whole wooden fence when it starts to lean, you look for a heavy-duty solution like the ARKSOLDIER fence post repair kit. First off, the thickness of this steel is exactly what you need for strength - 11-Gauge is no joke. I tapped it, I knocked it, and it rang true every time - that's toughness you can trust, the kind of support our fences need.Each anchor, a veritable fence post stabilizer, weighs a substantial 5.47 pounds, and this weight gives you the stability you desire. I mean, I actually lifted these heavy-duty anchors, and you can feel the heaviness signaling that your fence post isn’t just mended; it’s extended in durability. The one-piece molded design impressed me the most. It’s not made of bits and pieces - it's a single, solid unit, engineered with the Exquisite Craftsmanship Manufacturing method that screams durability.When they say it’s 33.62 inches of steel, they’re not messing around. The L-shaped reinforcement is like a guardian angel for fence posts stakes. It’s amazing how it transforms a shaky fence into one that’s ready to face any weather head-on with substantial support.Installing it? It was straightforward, and I had these fence post anchors up in no time - no digging, no mess. This stabilizer is a fit for various fence posts, which is a major plus in my book. However, I do wish they came with decorative caps to enhance the look after installation.For those of you on the fence about a fence repair solution, I recommend giving ARKSOLDIER menders a shot. It’s an investment that pays off in peace of mind - your wooden fence isn’t going anywhere. Just a heads up, make sure your fence is hefty enough to handle the anchor’s weight. Overall, these are the anchors you won’t regret anchoring to. Happy fencing!

We rent and our fence was falling over. The landlords didn't want to replace the fence so I purchase a few of these to hold the fence up. Doing the job really well! Was easy to install, it's much bigger than I expected but worked out well because the fence is tall and heavy.

These are superb! After years of repairing my falling down fence and every imaginable technique and product this one works and is easy! They even give you the bit, screw, and socket (which I didn't see but next time willuse). At one point I poured a massive concrete pier with a metal bracket for a fence post which of course rusted off and left me with an immovable inpentrable mass. I just pounded this down to settle on the concrete apron. Its not flush to the ground but looks OK and no other gizmo short of a jack hammer and new post could have done better. Its a high wind area so I used metal zip ties for extra supportwhich was probably unneccesary. I sprayed the whole thing with rubber acrylic which also was redundant but I had it do used it. Only problem is what to do with all the other useless post repair products accumulated in my garage. Not a bad problem considering the new solution. Compared to the useless products its a reasonable price. I just hope it doesn't get crazy tariffed. Buy this unless you like to suffer..

Very good quality and fixed my problem of sagging fence posts. I used on split rail fence posts. It was somewhat of a pain to drive into the earth. I used a 4 or 5 lb sledge hammer. It’s expensive….but the one piece design, thickness, and weld quality are superb. Glad I went with this product/brand. Doesn’t stick out as much as I thought, which is a good thing. Only reason I deducted 1 star is for the cost.

A little elbow grease makes installing these easy. They are strong and support a fence like they are supposed to. We had our fence posts rot out and am using these to hold our fence up. They have been holding strong for about a year now

Really excellent product. Heavy duty, metal, powder coated, excellent welds.A great way to repair a string of rotted fence posts.As with many imports from you know where,The hardware is always a little bit less stout than it should be. We tore off two of the screws. Just replaced them with larger ones.For the one or two pennies in cost, I wish these imported steel construction products used slightly oversized rather than undersized hardware.Doesn’t destract from the fact that it’s a very well built product.

Having previously used the 2 piece flat post repair kits, I found this to be easier to install and has held up well over past year. You have to ensure it will clear any concrete in order to use.

I used this to repair two rotted 4x4 fence posts. They worked great and are built really well. The welds look great and it’s just a very high quality product. It was a nice surprise to see that with the hardware package was a drill bit and a magnetic driver socket for the lag screws. I will buy this again if the need arises******update******After having these in the ground for awhile, I would recommend setting them in concrete right from the beginning. I have two that I had set in concrete initially because the soil was too loose to just pound them in the ground and they are still holding tight. The one that I did just pound in the ground has started to work its way loose so I pulled it back out and set it in concrete also now. So be aware that over time they may loosen up in the soil and you may need to redo them if they aren’t set in concrete