U103

Perfect for my project. Easy to install. Look perfect.

The media could not be loaded. These worked perfect my custom media wall build. They were easy to work with and to cut, I did not use the supplied mounting brackets and instead used a mixture of double sided tape and a brad nailer which proved to be effective. I’ve had them up for about 3 months now and so far everything had stayed adhered. They are spotless if you use them with an led strip with a high density of LEDs/meter. I highly recommend watching Chris Maher’s channel on YouTube for additional information about these strips and how to customize them using an esp32 and WLED.

These are pretty decent light channels for the money. I did a ton of research, including watching THAT video on youtube. The one where he is testing all the diffusers and LED strips. I ended up getting the flat diffusers just because they will be very visible where I am installing and found the flat profile a bit of a cleaner look.The depth of the channel creates the "spotless" effect. But if you flip through the listing pics, you'll see it also depends on the light strip you get. Strips with widely spaced LEDs won't look as spotless as strips with more LEDS per inch or COB (continuous "neon" style).To make this project WAY easier, I completed each channel section BEFORE fitting them on the underside of my cabinets. Added the light tape, covers, caps etc. If you can do this, it will save you a huge headache.Cutting the channels for 90 degree turns is tricky if you don't have a ton of experience. I could have done them with my dremel, but opted to use a miter saw with a box to get the angle perfect. Cuts easy enough but you'll have to grind off the burrs to clean up the edges. You can buy the right angle pieces, but they only come in silver and IMO don't look nearly as clean since it adds an extra seam. My partner 3D printed some corner braces to snap inside the channels to help them light up easier. If you get black channels, use a sharpie to color the cut edges for a cleaner look. If you get white like I did, you can put a little white wood putty in the seam. This is done with picture framing and helps a lot.The diffuser covers cut easily with scissors and snap in just fine. Even if you have 90 degree corners, you don't need to cut the covers at 45 degrees. You can just cut them straight across and apply them perpendicular. I ran out of the end caps with holes, and had to improvise, so I think that Muzata should include a few extra. Maybe even one extra strip of the diffuser cover.

The media could not be loaded. Lightweight and easy to install the only thing is that I hope they provide 1-2 extra mounting clips coz 2 of the clips I got need to be re-aline and I need to improvise

I've outlined the roofline of my entire house with these channels. and with this latest bulk purchase, i outlined my garage doors. They're relatively expensive, but worth the price. I've used the snap in clips and ive also pre drilled holes to screw in specific spots. Tip: stagger your joints, dont have your diffuser joints at the same spot as the channel itself, stagger them for better rigidity.

Actually, a very complete kit, ie, mounting clips, end pieces, nice channels, and frost diffuser. The channel is a little deep but the frosted diffuser combination was all that one could find. Worked well under kitchen cabinets and over stove top. Used bright LED and closely placed LEDs, about 120/foot. The LED spots do not reflect at all on the countertop. The diffuser light intensity is very good.

Good quality for the price

I was prompted to purchase something like this from a single YouTube review. Not of this product, but a tip for diffusing the led RGB strip lighting he had shining on his wall behind the edge of his home office desk. My butcher block desk is about 2.5" away from my wall, so I figured bare led strips would show as bright dots on the wall without this. It was definitely a lot of extra work to mount the channel on my desk, given awkward positions to do it (for me), but so worth it. I think it looks great. I'll add a pic to my review when the office is finished!