VideoSecuLCD LED Monitor TV Wall Mount for 19" 20" 22" 23" 24" 26" 27" 30" 31" Flat Panel Screen Maximum Loading 66lbs VESA 75/100 Ultra Thin Mount Bracket 1EA

Update: because of my setup I installed the mount side ways so the monitor slide in from the left to the right, because the mount has sorta a v shape going for it, took precise alignment to get it right but everything works and now I just slide my monitor to the left to remove it.Don’t mind dust in photo I’m doing constructionIn my case I didn’t have a stud to mount it too so I used a spare pice of wood affixed to the wall with toggle bolts and screwed the mount in. With the depth of the wood .75in the total space the monitor sticks out is 5in center and 9 inches on the extreme curve ends of the monitor (very small amount)Best flush mount on Amazon for a large 49inch monitor, very sturdy, best option for save space on a a narrow desk. Simple assembly didn’t even remove instructions from box.In my case my desk is 8ftlong by 19inches deep, with an 1800r curve msi oled 49 inch monitor, after trying other mounts this give me the most room and it’s far more sturdy. Honestly wouldn’t use a full motion for a 49 inch but if they could make one that overs small adjustments that would make installing even easier as if your not good at leveling you could fix it by twisting it level.

I was searching for something like this for some time. What a great way to be able to attach something to a wall and be able to move it around to another location if desired. While it then would require additional ones to be purchased, it is well worth it. You can also use it as a storage device, use it to hold something on a wall and easily lift it up to remove it and use it remotely. Might be nice if they made something larger for heavier items, but this one is pretty robust with a good paint finish.

I needed a mount for my computer monitor that would put it as close to the wall as possible and this mount was perfect. Sturdy, easy to install, and very low profile.

I decided to set up a secondary stand up workstation for my work from home needs. I decided to go for this low profile mount for a 27" external monitor since I don't need a swing out arm that extends away from the wall. The mount comes with a variety of screws to use with your monitor. Unfortunately, my monitor's VESA mounting holes were recessed so the included screws were too short. Luckily, I had some longer screws on hand and I was able to make the mount work. This is not really the mount's fault but it's worth noting that you might need longer screws. It's also worth mentioning that the instructions say that the mount MUST be installed into a wood wall stud or solid concrete wall.The mount comes in 2 pieces with one piece going on the monitor and the other going on the wall. After both installing both halves, you slide the monitor down onto the wall mounted piece. This was a little tricky but doable. After I initially slid the monitor down into the wall mount, I couldn't install the power cable and the hdmi cable since the space was too tight (about 1/2 an inch). I ended up removing the monitor, installing the cables, and sliding the monitor back down on the wall mount with the cables hanging down. If your monitor's connections stick out from the back, this mount might not work or you might need cables with 90 degree connections. Luckily, my monitor's connections are on the bottom so this mount works with standard cables.Overall, it might be a little tricky to install the mount depending on how your monitor is configured but the end result is nice and tight to the wall. Seems pretty stable too.

Solid, sturdy mount. Perfect for mounty my 27" Samsung smart monitor in my camp trailer. The wall and monitor side of the mount are secured together with screws after installation, keeping everything together during travel. Prefect! Came with all necessary hardware as well.

There is nothing fancy about this product, nor is it necessary. For the cost it does everything I was looking for in a simple wall mount for a 3rd PC monitor. Again, it doesn't have any additional features (e.g. tilt, pan, extension away from the wall, etc.), so know that going in. If those are features you aren't looking for then this little mount will serve you well without hurting your wallet.

The VideoSecu LCD TV Wall Mount is a mixed bag. You need to understand your TV wiring situation before ordering this item. If all of your TV inputs and outputs are straight out the bottom (or top or one of the sides), then this wall mount should work well for you. If ANY of the TV inputs or output are on the BACK of the TV, then DO NOT buy this mount. It won’t work. There is not enough space between the TV and the wall for any wires or cables.With that said, the mount does have potential. It is a simple, elegant solution. It is basic, strong and easy to use. I love the way the two mating parts simply slide together and remain secure.Unfortunately, my TV has all of its inputs and outputs facing straight out the back. The clearance between the TV and the wall with this mount is only about half an inch. That’s not enough room to bend the various cables behind. Even with my video and power outlets set into the wall directly behind the TV, it still won’t work.So, for my application, this mount was a failure. If your small LED TV has all of it’s inputs and outputs along the bottom facing downward, and you don’t mind that the angle cannot be adjusted, then this mount may be just what you are looking for.I give it a middle-of-the road three stars.

I wish I could give this 10 stars. This was prefect for my 32 inch MSI MAG moniter. The mount I bought first was not designed for a moniter this size and was cheap and flimsy. This mount on the other hand was solid and nothing about this thing is flimsy. I will tell everyone out there looking for a wall mount that this is the best one hands down.