Dritz Sew You Adjustable Dress Form S/M, Sizes US 4–12, Female Sewing Mannequin with Pinnable Body Torso, 12 Dials for Accurate Fitting & 360 Hem Guide

I have an extreme hourglass figure, so I make a lot of my own clothing since I have trouble finding manufactured clothes that fit properly. I have needed a dress form to test out muslins on, and given my unique measurements (42/29/40), an adjustable dress form seem to be the best bet. This one was good, but still needs considerable adjustments if you are busty like me. My overall bust measurement is 42 inches, but my underbust 34 inches. I wear a 34G bra. The dress form is a B cup at best.As a result, you cannot increase the bust size on this form without also increasing the underbust size. My advice, if you have weird measurements like mine with a large chest, is to adjust the bust on this form so that it equals your underbust measurement, and then pad out the breasts to get to your overall busy measurement. On mine, I put one of my older bras and stuffed it with pairs of pantyhose until I achieved the breast size I needed. This way, I have a more accurate bust on my form than the standard measurements. I have attached photos showing the unpadded form, and the form post-padding.Other than that, I like this form. It allows you to also adjust the torso length, which is not really an issue for me (I'm very short) but I know is concerning with other women who have issues getting waistlines on dresses to fit at their natural waist rather than inadvertently becoming an empire waist. I have small shoulders, and this form does not have adjustments for that, but that is not a deal breaker. As others have said, some of the dials may be hard to turn, but after a couple of turns, the rest of it went smoothly. It is a little bit flimsy, so you will probably want to avoid using heavy fabrics with it, but if you are using cottons or other standard dress fabrics, you should be fine.I think this is a good staple for any other gals who enjoy making their own clothing. You may still need to do some adjustments to get your exact body shape, but that is to be expected with any dress form. Good value!

This products is exactly what I need! Perfect for my crochet business (chantel_offical). Easy adjustments and easy to move around.

My latest ADHD hobby goal is to teach myself to sew. I've had the machine for 20 years. It was relatively simple to set up. I took a bunch of measurements, padded out the form with a bra that I filled with fiberfill and a cloth mannequin cover. used more fiberfill under the cover in appropriate areas to match my measurements and height. It's lightweight, but I don't have to worry about it being handled roughly. I'm the only one who will touch it. It's definitely not for heavy-duty wear and tear. It took a while to get it dialed into my body, with padding. The cover was far more economical than buying padded forms for the mannequin. I already had the fiberfill.Now I'm ready to attempt my first clothing project. 🤞🏽🤞🏽

The media could not be loaded. Great and really easy to adjust. I also marked the wheels so I can reset or change it easily. Size is accurate but do wish there was more range in either size.

I'm a professional seamstress, so I needed something very very adjustable that spins and pins. I used to work in a shop that had a Matilda from the turn of the century. She was a size 12, her height was adjustable but not her size, and you could pin to your heart's content and never worry that you would break her. Admittedly that Matilda had ugly fabric on her, but we used to have fun dressing her up with new slip covers. Ever since I left the shop I have been dreaming about buying a Matilda (or something similar), but they are very expensive and I just can't wait any longer. So I shopped around quite a bit and decided on this one. It's very nearly perfect. She spins, (I would argue that she does not pin), she's lightweight (Matilda was NOT), she's a lovey shade of emerald, and her feet do not scratch my wood floors.Pros:Very adjustable, cranked in she's roughly a size 2-4, cranked out she's close to an 18. Her height is also adjustable. Yesterday I dropped her all the way down, and beaded the bodice on a wedding gown while sitting comfortably in a chair. Then I cranked her all the way up and trimmed a tulle hem while sitting in the same chair.Lightweight, I can easily pick her up and set her on the table so I can work on a complicated hem without having to sit or lay on the floor, which is awesome because I have bad knees and do not get up off the floor quickly or gracefully.She was very affordable, enough so that I'm thinking about buying a large model too. The other ones I've been looking at would have cost me $400 each and I would have needed one in each size to cover my client base. Where would I put all that and how would I PAY for it?Expanding neck, which Matilda did not have at all.She spins and spins easily (which is critical for me as I can run hems through the sewing machine while the weight of the dress is held up and not falling off the sewing table).Cons:She's mostly plastic, which might not hold up long term especially with my workload (yesterday she had 3 different wedding gowns on her, today will be worse). I get that the torso has to be plastic, but I wish the feet and adjustment gears were metal.The skirt marker isn't long enough for wedding gowns and/or full skirts.She's rather flat chested (although I suppose it's easier to add than subtract).She's really isn't pin-able. I'm going to make a couple of padded sleeves to pull down over her, so the gaping holes don't offend my (larger than a size 2) brides and I can pin fabric to her. But how hard would it be to add some padding in the manufacturing process and charge me an extra $10-20 for that? Not too hard I bet.She has dials all over, I think she would be vastly improved if she had fewer dials that operated multiple openings with a readable dimension on the dial. So if I has a customer that measured 38, 25, 39, I could adjust one dial for each dimension and be done.I also wish that there was a way to adjust the height to a specific measurement. I can adjust the height yes, but I can't adjust it to exactly 5'-2". I have to guess at it, then measure and adjust, over and over until it's just so.I wish she had wheels, because I move her around all the time, and I have to be careful not to drag her because the torso pulls off the pole rather easily. I'm thinking about buying a scooter and fixing her base to it. But again, how hard would it be to add the wheels to the manufacturing process? Not too hard I bet.

This mannequin has everything you need to sew clothes of different sizes, it is easily adjustable although it does not hold the adjustment exactly. It is light and functional. Unfortunately for me it does not work because the smaller sizes are not compatible with mine, the mannequin is a little too big to sew clothes of my size. Easily assembled. Good value for money.