DEWALT15 Amp 8-1/4 in. Compact Portable Jobsite Table Saw (DWE7485)

This is easily the best table saw I’ve ever owned. Powerful, compact, and built like a tank — DEWALT absolutely nailed it with this one.The 15-amp motor cuts through hardwood like butter, and the compact size makes it perfect for job sites or small shops. The rack and pinion fence adjustment is buttery smooth and incredibly accurate, which is rare at this price point.I’ve been using it nonstop and never once thought about needing to return it — the return window closed weeks ago, but this saw isn’t going anywhere.If you need a reliable, portable table saw with serious performance, this is the one to get. Best ever, no question.

It's a great DIY table saw. Quick high-precision cuts using the rack and pinion fence. Relatively lightweight and portable. Quality build. I built a simple wheeled table to set it on. The 8 1/4" blade will cut a depth of 2 5/8". In my work, I seldom cut anything more than 1 1/2" deep, so it works well for me and lowers the cost of the same basic DeWalt with a 10" blade. On rare occasions, I cut 3 1/2" deep, cutting twice. Well-designed.

Firstly - Should have bought it years ago. I've been using a cast iron Craftsman 10" for years, but the belt drive was getting iffy. Plus, moving it around the garage was half the time spent instead of cutting. This is the cure! Get ready for an in-depth (unpacking) review...Secondly - The cons: My only real gripes; are that the start button needs better access - it would be nice to have a "click feel" when adjusting the different positions of the slide bevel push handle (Hitachi makes a very nice one) - and the tabletop is obviously smaller than my 10" Craftsman saw. I'll have to make a surface extension as it's not going to be fully portable.I sell these at my place of work, but for $20 more. I wanted to see if the online version was just as well built and with the same features as ours. I was right, they are the same. Very well-built, and solid with no shakes or rattles. I'll include pictures for your viewing pleasure and informational needs. I put a 48" straight edge on the table with the fence extended, using the measurement bar on the saw as a reference: spot on for blade/fence span.From the edge of the table shown in the spanned setting with the tape measure, 35" overall in case you wonder about support width. With a true 24-1/2" from blade to inside edge of fence fully extended. Picture 9 - The fence (flip-down support), is a very nice touch to help keep whatever it is you are running through in a full rip-level with the table surface.The blade guard shown in picture 3 - ours at work doesn't have this feature as it must be an older version. But this one; the guard you can lock in the upright position for a little more clarity if you need it. Nice oversized stop button that you can hit in a hurry; or if you are wearing gloves - you don't need to use just a finger to turn it off. The start button, to me, could be a little more accessible, or stick out farther. A minor detail. The blade spin with nothing loaded on it, stops in about 2 seconds from full spin. A nice touch, compared to a belt-driven blade which takes 2 weeks :)I like the tool storage on it, two places to put your blade stop/nut wrench. I see on the inside underneath, what looks like an additional tool storage slot, but the instructions do not say what it's for, nor is it labeled. Picture 5 - An extra place to put your blade kerf for when you transport it. Also on the outside of the fence is your push tool storage. You can also store your fence upside down under the right side of the table surface in transport mode!Picture 7/10 you get an idea what hose adaptor size for the dust collector you need. There is a tension adjustment for your fence extension bars on the left side underneath, if it feels a little loose you can give it a turn or two. I didn't install the kickback teeth as I do a lot of full - semi-full ripping of plywood, it's more of a hindrance than a help in my case. But for those who are new at table saws, I would suggest putting it on. There's also a handy storage for that kickback tool under the table surface.Overall, I'm happy with this saw. A very nice blade they install for you, smooth angle adjustment. Easy change blade guard with dust collection port on it. Dewalt wins again.Update: I've used it a dozen times now (plywood, 2x4, ripped a few 1x and wood trim). I put a collection bag on the blade guard, and a vacuum on the lower port. It will collect about 90% of the dust. The clear plastic blade guard I find I lock it in the upright position 9/10 times I use it, as I'm picky on "seeing" where it cuts (get yourself a nice face shield and dust mask). It's very loud, you will need ear protection. I still don't like the "on switch", you really have to jab it with an ungloved finger to activate it. Not very efficient when you are holding material in your other hand.

I expected this saw to be good quality but was pleasantly surprised that it was ready to go out of the box aside from adjusting the throat plate to be level with the top. The top itself is flat according to an actual straight edge calibrated to 0.002" over 38 inches. The blade was square to the top and even the rule for the fence was spot on. Been making full depth cuts ripping white oak and it's doing well. Of course its not as fast as the high dollar cabinet saws, but it does the job. Impressed.

The DeWalt DWE7485 table saw is an outstanding tool that has exceeded my expectations. With its 8 1/4 inch blade and 15 amp motor, it offers impressive cutting power and accuracy. The build quality is exceptional, with a sturdy and durable design that ensures long-lasting performance.One of the standout features of this table saw is its portability. It is lightweight and compact, making it easy to transport and store. Despite its smaller size, it doesn't compromise on performance or functionality. The rip capacity is excellent, allowing me to handle a wide range of materials and cuts.The DWE7485 is also equipped with a smooth and precise fence system that ensures accurate and consistent cuts. The adjustable bevel and depth settings provide versatility in cutting angles and depths, allowing me to tackle various projects with ease.Overall, the DeWalt DWE7485 table saw is a top-notch tool that delivers exceptional performance and versatility. Whether you are a professional woodworker or a DIY enthusiast, this table saw is a worthy investment that will get the job done efficiently and accurately.