Cooler Master MasterFan SF240P ARGB Integrated Fan, ARGB Customizable Lighting, Cable Management, 240mm PWM Control for PC Case, Liquid Cooler (MFY-P2D2-24NPA-R1)

Having three fans controlled off of one cable for power and another for RGB is really cool and great for some easy cable management. The fans however are kinda okay I guess. They're no Noctuas by any stretch of the imagination but they'll still move air and help keep your components cool as possible. Definitely really good for people who can't handle cable managing a lot of fans or has limited fan headers on their motherboard but wants as much fan as possible per header without using splitters or fan hubs.Also, while not recommended you only really *need* 4 fan screws for these as you can screw in the top two and bottom two holes and all three fans will be attached completely.

The media could not be loaded.  Tbh, I wasn't expecting much but I was wrong.Its a great set of fans. Colors are bold. Moves a good amount of air. Its quiet but can be audibly heard at max power.Comes with a cute little controller about half the size of a tic tac box.I am going to use a Razer Chroma Controller ( purchased and shipped) to control the LED's. I want to buy 3 of the 360s to go on my rig! (2 on top one on the side)I will add more pics later.It is AWESOME!Now with this fan all in one, there is 1 pwm and 1 fan connection.This makes it a LOT easier to deal with. I have a separateolder fan controller by BitFenix to control my fans!Do not wreck your brain over this! If you are looking for a cheaper all in one fan, this is it.

easy to use like the rgb lights

The fan works great and is easy to install. I put my on the top. You can have it blow in or out depending on which way you install.The lights are cool with a lot of different settings, though there is no remote. The only way to change it is a button thing that is plugged into the fan and magnetically stuck to the inside of my computer case. In other words, I’d have to open my case every time I want to change it, which kinda stinks.There was a small bit of noise, sort of like a pulsing sound, that could only be heard sitting to the left of the fan. If I moved to be in front of it, no noise. But when running a game or anything loud, I couldn’t hear the noise over the volume of what I was playing, so no biggie.And after a month or so, that noise went away.

Really liked this fan set, but unfortunately one of the LED sets didn't work on one of the 3 fans. It's a unified cable, so all 3 fans are wired into one input plug in cable, this helped immensely to consolidate how many ARGB fan plugs I had to deal with. My case has 7 120mm rgb fans and one 140mm rgb exhaust fans. The unified 3 fan with only one ARGB plug cable helps declutter my build immensely and helps with cable management. Fans were very good for quiet on all but turbo settings. After sending this one back I found another CoolerMaster 3x120mm ARGB fan that also has LED strips around the outside of the fan edges and the blade areas too for a little more and bought those. This is a very good ARGB fan set, just went with another different CoolerMaster model after initial return, especially if you want ARGB but not TOO much ARGB lighting on your fans. I chose more ARGB lighting to enhance my new build.

UPDATE: Installed, and working flawlessly. Amazing Sync with ASUS Sync. Changed rating to 5-Star, even with the below issue (which isn't that bad.)So, I haven't installed this yet, so I can't attest to the ease of install, or other things yet. But, I have a feeling it won't be too hard.The main point of this review is because out of the box, the wiring seems to be reinforced by cable sleeves, which is amazing. But coming out of the fan unit itself, the wires are hanging on, by the wires themselves. So I went out and bought a zip tie mount, used a mounting tape square by the primate company, a small black zip tie, and mounted it on the side of the unit, as shown. Now, I left some slack in the area from the unit to the zip tie, as the cable is still able to move even with the zip tie and whatnot. Which is fine. I simply did not want any undue stress on the cables coming out of the unit at all. Also, if you go this route, slip the cable under the zip tie in the mounting square. That way it will hold it better. The cables are almost too small for this to work, as this is meant for larger cables.This is the ONLY reason why I gave it 4 stars instead of 5. I really like Cooler Master products, enough so to give his particular product a review.Once installed, I will update the review to reflect ease of install and of course the operation.

Pros-- I like that the fans are a set that have one RGB connection and one fan connection. I also don't like that they have one fan connection. I run my fans on an externally powered controller so they won't shut me down, but they will shut you down if you run them on your board and one of them fails.- I got two, they both work good... maybe too good...Cons-I hate the plug on the RGB side. It is easy to just plug that thing in and have your mobo pins stuck up into the housing around the pins. You can easily fatigue your mobo pins to the point of near failure trying to figure that one out. Get a good light and a magnifying headset to install that particular item. Trust me on that, no matter your eyesight level. It might go easy, or it might go easy and you messed up it up royally. You won't know until power on unless you can see the connection clearly. Won't hurt anything either way, but why keep opening up your case for no reason?

It arrived on-time and although the box had a bit of a knock in the corner which wouldn't have happened had it been double boxed the item itself was in perfect condition. Installed in a Fractal 6 Midi Case with a glass side was so easy. 10 minutes in total and it is controlled by my Asus Rog Stix 570-E as they have a Gen 2 Addressable RGB header, so I didn't have to use the supplied wired remote control. It's at the top of my case to remove rising heat and provide great RGB lighting. The whole thing is quality, quiet, efficient and so neat, two cables one PWM for 3 fans and one RGB cable for 3 fans LED's and they are at least 18 inches long although I didn't measure them but fitted from the top of my case to the bottom of the Motherboard as they were long enough to go down the closed side panel rather than inside the case. Some reviewers have said they are ridiculously short so I think they may have changed them as part of the manufacturing process. It also comes with most if not all the extras you need for a compatible motherboard, if not you can use the remote control. In my Bios you can turn the fans of altogether but still have the RGB on which is great for me as in winter I have a closed soundproofed top and in summer an open grilled top as my system is in a roof space that gets very warm in summer. So all in all I love it, I have only had it installed for an hour but really can't envisage any issues with either now or in the future. A real plus given you have 3 fans on one system is the 2-year warranty. Why more manufacturers haven't done this I don't know because it's genius and so simple to install. Update: now had it installed for over 2 weeks and I’m very impressed indeed, it works flawlessly with the ASUS ROG STRIX Motherboard and Fractal Fan hub with it being PWM it’s just so controllable and silent until the CPU ramps up even then it’s pretty quiet. Update 10 months of use and still working great so I would highly recommend. I wish they did a 280 system as well for my radiator sadly they only do 240 one-piece units.

The media could not be loaded.  It may be good, I can't tell yet as the one I was sent was open boxed, covered in fingerprints sine dirt and surface scratches. The outer box was crushed and no bubble wrap used. This didn't matter as in the end it's not a brand new item. The actual concept of three fans together and only two cables to deal with is amazing. I don't know why this hasn't already been done as it's genius. I will update this review when I receive my replacement unit As of now I'm disappointed.

This is an ingenious way to remove cable clutter in your PC. The 3 fans only need one ARGB header and one 4 pin fan header. They are relatively quiet, and the built in RGB settings are good, but slightly limited.The fans are easy to install, and they require 12 screws in total. They are included in the box. The cables are quite short (I would estimate that they are 20cm long) so you may need to work out the distance to your ports if you are using these on the front of your PC.The only downside I had with this is, the fans do not work with my ASrock RGB software. The fans colours should be independent from my other RGB components but this is not the case. For example, they turn green when my other RGB components are turned red. The box advertises that they work with ASRock's polychrome software so this is quite disappointing. Fortunately you can use the RGB controller which is in the box.Also, I believe that this is a returned/opened item as there was 2 delivery labels underneath my label. This is not what I expected from a "new' item.

Inside my Coolermaster CM 690 ll Case I now have five fans and I had a Noctua 120 on the side panel but that was making a horrible sound so tried the Cooler Master SF120M on the side panel and no noise except the usual fan noise when on full speed. The Cooler Master SF120M and my two Noctua 140 with the rubber corners not running on full speed and you have a decent quiet pc. You can hear the fan but it's not annoying. The Cooler Master SF120M is better I think than the Noctua. The anti vibration in the Cooler Master SF120M is excellent and you can daisy chain 3 together. Expensive for a non RGB fan, worth it.

Bought this cooler as top plate for my Cosmos. I've decided that 1 assembled block will be better than 3 separate coolers with their own wires. And indeed - they have only 1 cable for PWM and one for Aura. Plastic/rubber dampening any vibrations. Cooler is very quiet, especially on silent modes. IDK who complained about noise. I can't hear any noise even on middle rpm.So this one is very useful for people who want to put coolers as one block. Less cables, better look.