Klein Tools CAT6 200-Pack Pass-Thru Modular Data Plug Bundle with Scout Pro 3 Cable Tester Kit for Ethernet, Coax and Phone Cables

These DO work with 23AWG wire! In fact, I wish I had purchased these to begin with. Don't be misled by bad reviews!I purchased the NavePoint Cat6 Plenum (CMP), 1000ft, White, Solid Bare Copper Bulk Ethernet Cable, 550MHz, 23AWG 4 Pair, Unshielded Twisted Pair (UTP) (ASIN: B07HGK9QVN) cable and was concerned that these connectors wouldn't work (because of the reviews). So I bought another brand instead (ASIN: B07TT7WSP2) because they said they were specifically for 23AWG. Those other connectors were junk. Let me repeat, those other connectors WERE JUNK. I had to put multiple ends on before they would connect at gigabit speeds.So I went back to these Klein connectors and they worked perfectly. They were easier to use and they connected at gigabit speeds on the first try. I didn't have any issues with the NavePoint Cat6 23AWG wire, they slid right up over the sheathing with no problem.Another side note - those other connectors wouldn't properly cut when crimping/trimming off the ends. But these Klein connectors trimmed perfectly when crimped. I would highly recommend using the Klein Tools VDV226-110 Wire Crimper to go with these connectors.

The Klein Tools VDV826-763 Pass-Thru Modular Data Plug lives up to its name and reputation. As a professional in the field, I've tried various modular data plugs, but none have matched the quality and performance of the Klein Tools VDV826-763. Its pass-thru design allows for easy termination without stripping or cutting wires, saving both time and effort. Additionally, the durable construction ensures a reliable connection for data transmission. I highly recommend the Klein Tools VDV826-763 Pass-Thru Modular Data Plug to anyone in need of a top-notch solution for their networking needs.

I found these hard to use with cat 6, 23 gauge cable though this was my first time making ethernet cable connectors. If your cable is 24 gauge or smaller, these should work well for you. Klein products are pricey but are dependable and reliable.

If you're new to low voltage connections, these connectors are an excellent option. Here's a quick tip for using them: push the wires a little further into the connector than you actually need them, then trim them to the right length and pull them back into the plastic enclosure. This method means you don't need a special crimping tool - any old crimping tool will do.Overall, I think these connectors are a great choice for anyone who needs to make low voltage connections. They're easy to use, require minimal tools, and produce great results. Highly recommended!

This is a review of four related products purchased here on Amazon.1. Klein Tools VDV826-703 Pass-Thru™ Modular Data Plug, CAT6, 50-Pack (ASIN B076PRM7W8)2. Klein Tools VDV226-005 Compact Pass-Thru™ Modular Crimper (ASIN B07R3GK9FQ)3. Soft Plastic Ethernet RJ45 Cable Connector Boots by Copapa (ASIN B07219KGC4)4. H!Fiber 1Gbe Ethernet Network Adapter (ASIN B074PPRQQK)I’m using CAT 6 UTP (23 AWG) that I bought from a local home center.1. I found the Klein Tools VDV826-703 Pass-Thru™ Modular Data Plug, (CAT6, 50-Pack) to be easy to use. This is my first-time using pass-thru connectors, and I have mixed feelings, but that’s not what this is about. The 23 AWG wires fit in snuggly but did require a bit of convincing to pass thru. They are more expensive than some others that are available, but I know these will work perfectly, especially with a same brand crimper.2. The Klein Tools VDV226-005 Compact Pass-Thru™ Modular Crimper did its job flawlessly. The insulation is held tightly in place, the crimp felt secure, and the pass-thru wires were cut perfectly flush. I still need to try this with cheap plugs, to see if they are cut just as flush, but these work great with their own.3. While I don’t usually use boots, I decided to give them a shot as they make the wires look more “finished”. I purchased the blue Soft Plastic Ethernet RJ45 Cable Connector Boots by Copapa. While they didn’t cost much, they were very soft and fit okay. I wish they were a little tighter around the wire, but that can vary from brand to brand. Overall, I’m happy with them.4. Once the cables were completed, I plugged them into a H!Fiber NIC (Intel I350-T4 chipset). They all fit nicely together, even with the boots. That network card is not the V2, and that was expected. The V2s are harder to find and there are no performance differences. The revision was made to fix a slight power surge during power-on. The network card performed flawlessly with pfSense and I was able to configure two LAGGs with LACP support. One to a Cisco managed switch, and the other to my cable modem (SB8200) but I’ll save those for a different review. This card is working perfectly.

very happy with the product, excellent

I struggle to find a good RJ45 connector I bought these with the termination tall as well, making it easy to terminate and make your own cables / patch leads they’re a game-changer for anyone working with network cables. The pass-through design simplifies the termination process, making it quick and efficient, even for those with minimal experience in cable termination.These connectors are built with durability in mind, ensuring a reliable and secure connection for CAT6 cables. The pass-thru feature allows you to verify the wiring sequence before crimping, reducing the chances of errors and ensuring optimal performance.Installation is straightforward, and the compact design of the connectors makes them suitable for tight spaces. Whether you’re a professional network installer or a DIY enthusiast, these pass-thru connectors from Klein Tools make the task of terminating CAT6 cables hassle-free.In summary, Klein Tools Pass-Thru Modular Data Plug RJ45 CAT6 connectors offer a convenient and reliable solution for anyone looking to streamline their network cable installations. The pass-through design, coupled with robust construction, makes them a go-to choice for achieving consistent and efficient connectivity.

Excelente calidad, con la herramienta de crimpado y corte quedan muy bien terminados

I do not have a great deal of experience with this type of connectors, but so far I am very happy.

There is way too much space for the 8 wires before they enter their pinlanes so it takes forever to get the wires to line up correctly since they clutter up so easily.