SEALIGHTLED Brake Light Bulbs, 3157 LED Red 3057 4157 T25 3156 Tail Light, Canbus Error Free, 2600 Lumens Red, with Projector Lenses, Plug N Play for Rear Parking Stop Brake Light, Pack of 2ClimatePartner certified

Easy to install and bright. You may need a resistor, but that's easy install.

I bought this set of bulbs to replace the front turn signals in my 2014 Escalade. I had originally purchased a set of LED bulbs from my local auto parts store and they would rapid flash so bad that I would not use my turn signals.The original bulbs were the old standard bulbs. One of them went out and that's how I found out about the rapid flash. It is the cars way of telling you that a bulb is out.This LED resolves the problem as it puts the correct resistance in the circuit so the system feels all is well.Yes it costs more, but so worth it if you don't want the rapid flash.

I have a 2015 Ram 1500 and went through alot of Led Lights that would work until I bought these. They do not hyper flash or cause any light out warning. I plan on purchasing the red for my taillights. Also bought the low beam H11.Would recommend this product especially if your having issues. Try these first before buying anything else.

Installed in 2016 jeep wrangler. They work, however they are not CAN BUS compatible. Unless you get a “decoder “ from sealight. The decoder has to be spliced into the wiring. It’s basically a resistor. I wanted plug and play lights. I do not want to splice into the wiring. I’ll keep them for my Mustang which isn’t a can bus system.Update: I bought these for my 2003 mustang gt. They worked fine until one overheated and melted. Fortunately it broke off and I was able to dig the rest of it out of the socket. It didn’t damage the socket. I have six of these for my brake lights. The rest work fine. They are bright. Probably just a defect in this one.

Great buy

I had previously purchased Sealight bulbs for our Toyota Highlander and installed and had them worked without issue. I thought with this being the case I would be able to the same with these bulbs for our Tacoma that had a burned-out bulb, but that has proved to be anything but simple and possible. Before making a purchase of these bulbs I inquired with the company to ensure correct bulb selection and operation without issue for my vehicle. I was assured these bulbs would work without issue.Once I received them it has been nothing short of a very bad experience. The bulbs themselves do not just plug into and fit into the factory receptacle easily - there are little nubs on both sides of the led base fitting that make it difficult to push in (it should be noted from reading other buyer's product reviews I'm not the only person who has had this happen). Once I got the bulbs installed, they powered on but the same hyper flash from the OEM bulb burn out was still occurring with these new LED bulbs. It took numerous calls and emails to Sealight to reach someone who then asked all kinds of questions but quickly told me they'd ship me a decoder and I could expect to receive it in 3-5 business days. I asked for the decoder product details (picture and "how to" install) and was told they'd email it to me. I never received any email from them. After waiting well over 5 working days, I emailed Sealight twice over three days before I could get a reply. They thanks me for emailing them and stated thanks to my email they had now shipped the decoder (obviously they never even shipped me the decoder from contacting them before). And again I sent them an email asking for decoder product info (picture/install instructions). They never sent anything again.But then today, surprise - the decoder (I'm guessing) showed up. I say I'm guessing because it was not identified as a "decoder" anywhere on the package, product, etc., the package return address was in some person's name and the small package had a ziplock that contained two short wires with 1 set of hollow blue plastic plug looking things and another of the same in red with about 4 or 5 small zip ties. That was it - no instructions were included, no product description or anything letting you know what this was, how to install or use. I tried calling numerous times, leaving a message for a call back numerous times and received no call back. But I also sent an email and got a simple reply which had a very brief 3 sentences/steps on how to. They also ended the email stating "the resistors will emit a lot of heat when working please avoid contact between resistors and other plastics in the assembly." WHAT THE WHAT?!?! This whole thing was largely plastic - blue and red loose hollow plastic looking plugs with plastic coated wires - REALLY?? Avoid plastics in the assembly?? What part is a resistor, how does it wire into with the socket and the bulbs, what do you zip tie to what and how in the world do you "avoid plastic" with such a set up?This whole thing has been totally ridiculous! A simple burned-out bulb that needed to be replaced - I'm not sure what is more nuts - them for conducting business like this to a customer or me for even trying to do business with someone like this. What kind of way is this to treat a customer who is obviously having difficulty with their product and who has tried hard to understand how to best use their product and avoid having ANY issues??From my experience THIS COMPANY AND PRODUCTS ARE REALLY MESSED UP and the LACK OF CUSTOMER SUPPORT AND SERVICE is pathetic and INEXCUSABLE! I'm sorry I ever purchased Sealight bulbs previously and especially now. But I'm very glad that Amazon covers the return as these bulbs as they are being promptly returned. I'M NOT EVER PURCHASING ANY SEALIGHT PRODUCT AGAIN and seriously DO NOT RECOMMEND SEALIGHT PRODUCTS REGARDLESS especially based on the product design, poor customer support and service (think about it, even if their product appears to fit and works and the price might be good, if you ever have any issue with their product, whether at the beginning or later on (like a warranty issue), forget about being able to trust that anyone at Sealight will help take care of it for you). I'm done with this and done with Sealight.I really hope that anyone taking the time to read this will understand and take into serious consideration this information before purchasing any Sealight products!

These bulbs are great, the built in fans almost scared me off but I’m glad I gave them a try. Extremely bright, and impressively compact. There isn’t much room in my front turn signal lens but these fit no problem. Quality seems very good, although the longevity of the bulbs hasn’t been tested in my car yet. These bulbs use a lot of power for less, 30 watts! That’s a little higher than the old incandescent bulb actually. If you want to give your older car a more modern, sharper look, I highly recommend these!

Very bright ! Works great