Stronghero3DRainbow PLA Filament,Multi Color,Net Weight 1kg(2.2lbs) Accuracy +/-0.05mm

Only about 20 rolls into the hobbie, but this rainbow filament has been great to print with. Color comes in a nice gradient, got no clogs or tangles, went down nice from the first layer on. Make sure you print a temp tower first and go from there.

Good print quality and colors

I bought 3 rolls of this on Prime Day, figuring I could try one and if I hated it I could return. The colors were too pretty to resist. The temp tower seemed to indicate this filament is not too picky about temperature, so I set the slicer to 195 and tried a rose dragon. Even at 15% infill, the colors change really fast. I typically see a lot of stringing with silk PLA, but not with this filament. The photo is without any cleanup. Fantastic filament!

I was very excited to see these go on sale, since I love the colors. The first couple small prints went well, but the filament was stuck to itself, and had lots of strings on the spool. It was not wound into the spool correctly, and eventually it came to a spot where the filament was trapped underneath what should have been a lower layer. This stopped my print. Honestly, I feel like I was taking a huge risk using it at all after seeing how badly it was made. I bought two colors. The unopened one also appears to be wound this way.

This filament has quickly become one of our favorites - it prints beautifully, with great bed adhesion and very minimal stringing. Course the best part is that anything we print in this gorgeous rainbow sells like crazy! I've got it on Subscribe and Save to make sure we don't run out - highly recommend it.

I purchased this for a friend. The color is gorgeous. When placed near light, the multi colors just gleam, and throw purples, blues, green hues. Rolls are bigger than I thought. Plenty of uses before you'd have to replace spool.

Printed on the Ender 3 Max Neo. I could NOT get this filament dialed in to give clean prints. I tried several extraction and temp settings. I only have the issue with this filament. I currently have it in a dryer to see if that helps. I also have a second spool in a different color, I will try printing with that in the next few days and see if I get different results. Adhesion was good, prints held on the build plate but were easy to remove from the glass bed, no glue or hairspray was needed.

Color transition is great for a six inch tall statue