MOOG K90454 Suspension Stabilizer Bar Link for Honda Civic

So gar so good. Very happy. Holding up well. Wiill need to grease fill them. Grease fill was what i was looking for. Suspension on this car... eh. Go with grease filled. Happy with this product

Product was shipped fast and arrived on time! Moog is a really great brand compared to OEM for suspension products

Make sure to replace your end links in pairs. This item is for your front LEFT (K90454). For the front RIGHT, it is K90455.If your car squeaks like crazy going over every small bump, it's probably your sway bar.First make sure your bushings are greased properly and have not worn down from contact with the bar.If your bushings are shot, then replace them with bushings that have grease zerk fittings such as Energy Suspension.They will last longer since they would be lubricated and you won't have to take it apart to grease.Next, check your sway bar end links. If the boots on your end links are ripped, then you need new end links.Right out of the box these end links are noticeable heavier and about 2x thicker so they can be used with larger aftermarket sway bars.They also have a large rubber boot that is already greased but can hold a lot more grease than my factory ones.These also come with grease zerk fittings so you can grease them instead of replacing them if the grease disappears over time.The end links also have a different installation system instead of your factory one that required a hex key and a crescent wrench.These use a regular nut and you just need something to hold the other end when installing.There are 0 chances of you stripping the end link which saves you a lot of trouble.I installed these on my 2003 Honda Civic Coupe.

couldn't ask for a better replacement part

This replaced an aftermarket front sway bar link on a 2002 Civic that failed after 10,000 miles. The sway bar was making a terrible knocking noise after driving a few miles. It sounded like a bad strut but was actually the frozen solid cheapo sway bar links. The Moog design is more robust and allows for periodic grease refills. Installation was straightforward and very easy with the wrench flats on the joint side. It's a relief not to deal with the Allen wrench setup of the stock links. The Amazon Moog links were also half the price of my local parts store. I'll be purchasing the same type when the rear links go bad.The picture shown is a little different than the part I received. My link had the grease fittings on the rounded sides with a recessed sealed rubber boot - not the loose fitting style shown on the product page. I believe the part that actually shipped is a better design.

I installed this on my Civic 2001 DX. BTW Moog has changed the design (I verified it from Customer Service of Moog and the one I got looks different than the picture of product on Amazon page). People complained about grease nipple not at 90 degree is a problem. In my case its not a problem. It does not come pre-greased thus you will have to buy a grease gun and grease it. Tip:1) don't grease it before install as the grease would come out during install making a mess.2) The torque for tightening is 29 ft-lb3) You might have to jack up sway bar to get the bolts lined up with sway bar hole on one side4) Needs re-greasing once after two oil changes. In my case it will be once a year. I will put a reminder in my calendar for next year

Greaseable and beefy...Feels like twice the weight of the stock links, but will probably last 20 years.If you're trying to cut weight, might want to go with the weaker stock style.

AAA +++

Fits like a glove! Sturdy and well builtGreat studio!

Perfect fit on my 2004 Civic

I have just received both of my oder was sway link bar moog k90454.it looked very solid very good quality and very quick shipping and on time .good services. Thanks

The item was just what I expected but the two day delivery was a misnomer. It took 7 days for it to arrive. I’m assuming COVID had a lot to do with it.

Fits well no complaints so far