Powerbuilt 3 Ton, Bottle Jack and Jack Stands in One, 6000 Pound Capacity, All-in-One Car Lift, Heavy Duty Vehicle Unijack, Wide Base, 620471

I have had mine for a couple of years and it is a great tool to keep in the toolbox. I have a little bit of a taller truck and it works great. I have had zero leaks when it comes to the hydraulics. It’s definitely worth the money.

Needed a better, taller jack for my Prospector XL pickup truck (lifted, big tires) because the original Ram factory jack was played out before it even got a tire off the ground, and it felt wobbly even then.Gave this a shot for three reasons: wide base to distribute load on soft soil, such as off road; auto-locking feature so it doesn’t crush me if I have to get underneath; and high load capacity.I’ve used it several times on cement for rotating tires and it works as described. It is a heavy jack - you won’t be picking this up with one hand - but the looks and feels do inspire confidence that it’s going to keep the truck off the ground and off of me. Plenty of stroke to raise my 40” tires, locks in place as it says it will, and it’s a whole lot smaller and cheaper than one of those offroad floor jacks, so it doesn’t break the budget or take up much space in the back. I trust it to keep me non-squishy when I have to put an appendage or my head under the truck. Only thing I think could be better is a longer handle. It can be tough to reach the jack when it’s under an axle. I might weld an extension to the factory handle if it bothers me enough.

I've got a 2in leveling kit with 33in tires on my Silverado and this jack slides right into place with 3 to 4 inches to spare when fully depressed. Jack's up plenty high enough to remove the tires with plenty of room to spare, and didn't even need to adjust the mount (had it in its lowest position). Easy to jack up, though just for convenience it'd be nice to have a longer lever/pipe. The one it comes with means need to reach under the truck to lift it. Not a huge deal though. Also, I used this on my truck before the lift on stock tires and it just barely got under the frame, so it does work with stock front suspension on the 2018 Silverado.

This jack is a game changer! It’s strong, stable, and the all-in-one design makes lifting my truck fast and easy. No need for separate stands. The wide base adds serious stability, even on uneven garage floors.

The floor jack was built tough, I just had difficulties getting the ram to drop which made removing it from under the vehicle once the wheels touched the ground and the suspension stabilized. I had to pry it down to get it to clear the carriage rail to slide it out.[UPDATE]So initially, I returned my jack because of the difficulty is getting the ram to lower. I spent the better half of two days trying to find a comparable replacement to no avail. I ended up giving the unit a second chance and ordered another one (mind you for a few dollars more which was fine).The new unit arrived and the first thing I did was attempted to test the piston. The unit raised and lowered smoothly. I was a little concerned that the bottle jack seemed a bit wobbly but I was willing to deal with it. during one of my sessions of testing the ram I heard a small tap noise and looked on my table. There was a screw on it.My initial thought at the moment in time was "What the?" I gave the jack a very thorough look over and discovered that there are two screws that secure the bottle jack to the frame. One fell off, the other was a little loose and originally this sort of made me somewhat disappointed. However, after looking at the screw and seeing how thick and meaty it looked I went ahead and reseated it and used my power tool to reseat it. It reseated perfectly and I could feel by how well it mated with the assembly that there was quality and confidence behind that connection.I think it could have been a case of someone missing this trying to get these out of the assembly line to meet the demand. Despite this, continuing my thorough inspection of the unit continued to raise my confidence levels. The areas under stress and of critical importance have been engineered in a manner that prevents you from accidentally tinkering around and possibly putting the jack in a compromised state which I appreciate.The lift handles are riveted on so I don't have fears of that popping off and having the unit fall on to my foot during transport as an example and the ram is bolted to the jack support so you don't need to worry about possibly having the two not be aligned properly before putting the points under load.It was these little touches that despite my initial complications of having to get it exchanged along with having two of the screws losoe on the bottom that I still changed my original rating of four stars and upped it to five. I do feel that having gotten past these little nuances was well worth it after taking the convenience, practicality and quality of the unit (as a whole) in the end and quite frankly, I haven't been able to find an alternative solution that is as well integrated as this one at a similar price point.Having had my issues gave me an opportunity to really give my jack a thorough look over and it was during this time that I truly got to understand and appreciate the engineering behind the product.

My vehicle ( Ford transit connect van) sits low to the ground making it almost impossible to do an oil change myself. I use these to jack up the front end of my vehicle high I enough for me to get under there. Because my vehicle is so low, I have to drive forward onto two small sections of two by fours I made just for this purpose. This raises the front end up so that these jacks will fit underneath. They’re about half an inch too tall otherwise but once they’re under there and locked in place, they work very well and feel very safe. I was able to do an oil change in about 20 minutes and saved myself all that waiting and over $100 and never really knowing for sure if they actually changed the filter. These things will pay for themselves in no time they are well made and a good price. They’re small and easy to store away when not in use. If I had 2 more, I could lift the entire vehicle off the ground safely and easily. Now that I have them, I’ll be safely changing oil and doing other repairs on all my vehicles .

Item arrived quickly and with all parts listed. I have not been able to test the full lift capacity yes but it works amazingly for lifting up our mowers for regular maintenance. The lift height is good but i would like for it to be higher and I understand that would require the jack itself to be bigger. the compactness of combining the jackstand and jack helps make it easy to remove from underneath and easier to store.Overall this is a high quality item and I have no doubts that it can lift and hold 2 tons.