HUANUO Single Monitor Stand - Gas Spring Single Arm Monitor Stand Desk VESA Mount for 13 to 32 Inch Screen with Clamp, Grommet Mounting Base

I was a bit 50/50 on these VESA mounts when I was looking at them on Amazon. Fortunately, they were on sale when I got them and so were at a comparable price to another option that had a lower weight capacity.So far, I am pleased with the results. I set them up in using the C-Clamp mounts that are included, because the mounting plate for the alternative grommet mounting was far too small for the cable holes on my desk. Your millage may differ, the cable holes on my desk are 2" deep by 3.5" wide, larger than the mounting plate.Set up is relatively easy and does not require anything other than what is included in the box. However, be aware that you may need the standoffs and long screws for the VESA mount if the bracket is recessed into your monitor like on my Dell S2721DGF. My LG Ultra Gear LG32GP850-B just cleared the quick mount bracket, but the release for the stand it came with does interfere a bit and needs to be pushed out of the way. An almost three handed operation, but more an issue with the monitor than the mount.The mounts are sturdy enough and are holding almost ten pounds each easily with no adjustment. They are stiff but tightening bolts can be backed off or on for adjustment. It would be nicer if these were thumb screws like on the back of the VESA bracket but it's not something that I'm going to be messing with regularly.I'd knock off a star for build quality, lots of plastic, but for the price I'm not expecting all metal.Cable management in built into the arms, nice plus there. Each swivel point works exactly as you see in the product page, and I've had to do little adjustment once I got them assembled and the monitors mounted.Biggest upside to these mounts is how much space I saved over the old stands that these monitors came with. Both Dell and LG gave me stands with massive footprints on my desk and now I have all of that space back to use. Definitely worth picking up if you have a 32" or smaller monitor. Larger may work with the rated seventeen-pound capacity. However, be aware that at full height I have seven inches of clearance from my desk to the bottom of my 32" LG monitor. Larger ones will have less, and you may want to consider a different mounting option even if your monitor falls under the weight capacity.So far, I can recommend one, or two in my case.

Quick note, I do recommend to have your own philips screwdriver or set of screwdrivers as the tool included is annoying to useThis is very sturdy and can hold my 17 lbs 32 inch monitor quite well. The range of motion is good but because the way the gas spring arms are designed, you have to shift the base and top of the arm to get the right length away from the wall. I’ll add a picture because I have to have the arms adjusted at almost right angles to control the tension and direction.The assembly is super easy. It comes with both materials for off the edge and grommet for anywhere on your desk. I chose the grommet and made 2 holes with my drill to place my arms by the corners of the desk.Overall, I’m very pleased with the arms as it gives me more space for my desk work. I’d consider getting one with a pole to place a third monitor on top in the future.

This mount is of high quality and has a lot of features. The instructions, however, are of poor quality and difficult to follow. I was still able to assemble it with some trial and error.My main complaint with this monitor arm is the tension spring mechanism. I was not able to tighten down the tension spring using the included Alen key. The arm just kept going back to its original position. I tried a second unit and had the same issue. Thankful the default poison seems to work in my setup. I still may be doing something wrong, it's hard to say since the instructions are difficult to follow. For this reason I knocked off one star.This is still a nice product and I am plan to keep it. I will update my review after i use it fo awhile.

Needed a monitor stand for my monitor and this product performed great and was at a great price. I really like the adjustability and range of motion it provides. Many options to choose from and holds up great after many years of use.

I don't normally write reviews for my purchases, but I do find reviews very helpful in deciding on my purchases. I purchased this arm to attach my Huion Kamvas Pro 20 to so it is easier for me to use, I have a small workstation and don't always use my graphics tablet, I still like being able to use my mouse and keyboard even when I am working on my tablet.This arm enables me to swing it in and out of my desk as per needed. The supplied stand for my Kamvas just din't work well for my setup due to lack of space, and I could't use my mouse and keyboard very well with it like that. I was really dubious whether this arm would work for my situation, but it does it also allows me to rotate my tablet when I am drawing on it which is really helpful in certain situations.The cable routing option also is a blessing in my situation and it keeps the three cable's I need to attach my tablet to my laptop and the power point tidy and out of the way.So, if you are looking for an arm to attach your graphics tablet to this is a great choice, I don't know if it would work so well on any of the larger sized tablets than mine, but it would definitely work on any of the smaller versions.I hope this review will help anyone looking at this for a similar situation to mine.

the monitor stand works good but it swivels way too easily. if I shake my desk a bit, then the stand slowly turns to the right. also, it's really annoying to make straight. if I accidentally hit it and it becomes crooked, then it takes a long time to get it straight again. the springs are good and the quality is pretty good. it's just that it moves too easily with a small desk. if you have a heavy desk then it won't be a problem for you