Will this fit a 2010 Chevy Silverado?

Let me start by saying I've been a mechanic for close to 20yrs. This cooler being a "universal type" will fit just about anything you want to put it on. It would fit, and help a Silverado, or any make/model that has an existing trans cooler. The fitting it comes with are hose barb type (meant for a rubber line to slip over it with a hose clamp) and the lines on your Silverado should be hard plastic if I remember correctly. You would need to get a couple adapters to convert to a rubber hose fitting from your setup. These use the plastic clips that go through the current radiator that place it in front of your radiator, so you'd want to make sure your cooling system is up to par if you plan on heavy towing or hauling. I used mine on a 96 Land Cruiser, and it's being used for the power steering (37" tires like to destroy the power steering system) to keep the fluid from boiling over or "cavitating". For my application it works awesome, to help cool your trans. it should work great as well. For my application it added roughly a half quart to the overall fluid capacity, helping a lot with a 2.5qt system. If you are looking for a specific one for towing, this will work fine. Many people are going to the aluminum barrel type with the fins (looks like a heat-sink) on the exterior and getting good results. I went this route because it's significantly less expensive and has more cooling area, and holds more fluid. A comparable finned aluminum unit was getting well over $200 for similar added capacity, so that was a no-brainer for me. Yes, it will fit. You'll need adapters to go from your hard lines to hose (probably $5 at your local hardware or plumbing store), but otherwise it works well. This is my honest advice from experience.

will this fit my car from china, it has no trans and no engine?

Adam is incorrect. This will fit your bicycle perfectly. Mount it in the front of the handlebar.

Will this work with - ozcoolingparts jeep cherokee xj... https://www.amazon.com/dp/b07d3ktvjm?ref=ppx_pop_mob_ap_share

This is a small heat exchanger , designed to work at small pressures , Your transmission fluid pressures are relatively low . It is designed to take the heat , that is produced by the average transmission . You must make it work by small modifications to attach the heat exchanger to your vehicle . I installed my unit on a 2000 Honda CRV . I had over hauled the Transmission myself in order to save money . I am 72 years old, so I am slow compared to a real automotive Transmission Technician . But if I have the tools , and equipment ,, I will attempt many things . The Transmission is working fine after I overhauled it, putting in lots of new components . The Tranny Cooler, is simply and insurance policy to keep it cool . Many Auto manufacturers have failed to provide adequate methods to always keep their Transmission cool . But they are learning a lesson .

Whats the difference between thos one & the other 512 model?

The 512 model is a 6 pass heat exchanger, and the 516 model is an 8 pass heat exchanger. Since the 516 has more passes thru the exchanger, it will draw out more heat energy from the fluid than the 6 pass exchanger.

Desertcart Logo

Deliver to Argentina

For best experience Get the App

DOWNLOAD THE APP

WE SOURCE ITEMS FROM

UAE
UK
India
USA
Japan
KOREA

Customer Services

About Us

Customer Support

Description

🛠️ Cool your ride, rule the road — stay ahead with Hayden’s high-performance edge!

LIGHTWEIGHT YET RUGGED - At just 1.29 kg, it delivers high performance without adding bulk
TRUSTED HAYDEN QUALITY - Machined exterior and premium build from a leader in automotive cooling
CORROSION RESISTANT FINISH - Electrostatic powder coating guards against rust and wear for long-term performance
UNMATCHED FITTING RELIABILITY - SAE 45° fittings ensure leak-proof, durable connections under pressure
PRECISION ENGINEERED DIMENSIONS - Compact 3/4" x 10" x 15.875" design fits seamlessly in your setup

The Hayden Automotive 516 High Performance Transmission Cooler is a precision-machined, lightweight cooling solution featuring compact dimensions (3/4" x 10" x 15.875"), SAE 45° fittings for superior reliability, and an electrostatically powder-coated finish to prevent corrosion. Designed to enhance transmission longevity and performance, it’s the trusted choice for professionals seeking durable, efficient cooling.

Reviews

M**K

Suitable for dodge challenger v6 2013

Awsome heavy duty product ...... need add some minor work to let it fit and I have test it for a month without facing any defect or leak ....Highley recommend it

30.07.2022

Y**.

concern about the threaded connection, rest all is good

i installed in camry 2005 and i had to buy hoses more for the installation, after installation the car idle silently and no vibrations. so it is worth installing. the threaded connection is a little tricky and prone for leake, otherwise easy installation.

21.11.2021

S**E

Works very well. Have installed on my LC 100

Works wonderfully well and have had no /T temp issues post installation

27.04.2021

M**.

Good

Excellent

4.04.2021

AR$222057

Duties & taxes incl.

Argentinastore

Free Shipping

with PRO Membership

Free Returns

30 daysfor PRO membership users

15 dayswithout membership

Secure Transaction

Trustpilot

TrustScore 4.5 | 7,300+ reviews

Anita G.

Good experience, but the tracking updates could be better.

2 months ago

Pooja R.

The customer service exceeded my expectations. Perfect for buying products you can't find elsewhere.

1 week ago

View all Trustpilot reviews

Manufacturer	Hayden Automotive
Brand	Hayden Automotive
Model	Transmission Cooler
Product Dimensions	40.13 x 1.78 x 25.4 cm; 1.29 kg
Item model number	516
Exterior	Machined
Manufacturer Part Number	516
Special Features	Lightweight
Item Weight	1.29 Kilograms

Hayden Automotive 516 High Performance Transmission Cooler

Details

Description

Specifications

Have a Question? See What Others Asked

Reviews

Common Questions