YUFANYA 2.5 Inch Honeycomb Bixenon Projector Lens with Sliver Chrome Shrouds,High/Low Beam Function Mini H1 Fit for H1 H4 H7 Car Motorcycle Retrofit

The media could not be loaded. This was my first time doing a retro fit. everything went smooth. I did read other reviews about shimming to get the correct angle. I used washers that I angled with a grinder to make it a permanent solution.

Amazing product.

Fast delivery.Very well constructed.It comes with all extra adapters for most bulb sizes.Also comes with a small motor for hi/low (see pic).Im very happy with my purchase.

Please do not buy… I bought it and installed it and the next day I see it handing down I had to reopen the headlight and see that the area where the light screws in is broken the material is so bad…

When trying to tighten the retrofits down the keys would break and basically locked to the retrofits before they were completely tight. So they move around. I was able to make them stop moving by adding jb weld.... but not the best outcome. Becareful with the locking ring

Stock lighting on my Jeep XJ was terrible. Had an HID kit but didn't really work well in a halogen housing. Had to adjust the beam lower in order to avoid blinding traffic. Tried LED bulbs too but had the same issue. After some research I decided to try a projector retrofit but didn't want to dish out $120+ for the Morimoto brand so I thought I would give these a try.Installed easily in some Pilot H4 headlight conversions (already had them and was purchased for $30). Had to purchase shallow flanges (2 for $4 from Ace Hardware) to place behind the headlight housing. The threaded shaft fit perfectly and I was able to tighten the adjustment nut. Placement in the sealed beam headlight was perfect. I did have to make some adjustments to the beam pattern using the headlight adjustment screws and it has been working great so far. Time will tell how long these will last but for $26, can't beat it. Also purchased the Morimoto H1 bulb holders ($17) which fit perfectly on these projectors and keeps the H1 bulbs straight and stable.All in all, everything was about $80-$90 including H1 HID bulbs I purchased for $8 (already had an H4 kit installed by Innovated $35) Used JB Weld to secure the shrouds in place since the included screws we're too short. I could have probably purchased longer screws but I decided to use JB Weld since I had them already and it's what I saw on all the how to videos.Updated with a photo of the light/beam pattern. Still need to make some adjustments. The glare is due to the shrouds not being installed so I could easily make adjustments. When the shrouds are installed, there is no glare above the cutoff line. So far I am very happy with these projectors, Drove about 1,800 miles on the highway and what a difference it was compared to the original HID kit without projectors. Wish I had a picture to show what it looked like previously but trust me, there was barely any usable light.

Very affordable. Good quality everything went together as it should. I put these in my 2007 ridgeline that had h4 headlights this retrofit to h1 projector was perfect I didnt need to adjust afterward took me less the two hours to the whole job. I would definitely buy again

Was easy enough for me to install, lots of extra parts.