Innokin SNS02106 Zenith MTL Tank 2mL, High Quality Atomizer, Mouth-to-Lung vaporizer - Silver - No nicotine or tobacco

I was hesitant about this seemingly well designed tank from some reviews talking about dry hits etc. - however after a month of use I can say that I'm very impressed - refilling is SUPER easy on this tank - and as it's a 2ml that's a very good thing. No cross-threading to worry about and the coil replacement is super easy - in general I think it's perfect for a MTL vaper like me and way less fiddly than the nautilus and just as good flavour reproduction. I may order a 4ml from China at some point but if you want a replacement tank for your tired nautilus I highly recommend this one. Easy to tell when it needs refilling if you tilt it over and no liquid comes onto the glass you're a few puffs away from needing to refill - same time every time you can easily predict when a dry hit's coming - and when it does, after refilling it tastes just like normal - I just replaced the coil and the one month old one didn't look that dissimilar from a new one. Nicely made!ONE YEAR UPDATE: Still going strong, best tank I've had so much better than others I've tried, no leaking, no spitting, super easy to refill and change coils, decent flavour, what more could a MTL vaper ask for? No crappy o-rings to replace solid build lasts forever

I have used the aspire nautulus mini for quite a wile and yes i do still smoke the baddies as well iam trying to give up the sticks and ge onto the vape i have been doing it for a while with little success i think down to will power but i thought i would give this tanl a try seems very similar to the naught 2 a lot simpler to fill great bottom fill was becoming a pest not changed the coil yet but looks easy to do i am hoping this will help to get rid of the sticks by the way it works perfectly with 100%vg juice and also 80/20 overall a good well made and desighned tank

I've not been vaping long, and prefer MTL (mouth to lung, as opposed to direct lung - DL), but I like a very "airy" MTL. I bought this because I read that the lower resistance coils provide this, but it's still a bit tight for me, even with the air holes fully open. It comes with a 1.6 ohm coil pre-installed (recommended 10 watts) and a spare 0.8 ohm coil and 2 drip tips (mouthpieces - all this jargon!). There are no written instructions provided, but a bar code provides a link to instruction videos. Both tips are short and a bit narrower than standard, but still a bit wide for my liking. I tried the installed coil first, can't say too much about it, as burnt it stupidly, but it provides quite a tight draw. The 0.8 ohm coil is a bit looser, is supposed to be vaped at slightly higher wattage (18 watts recommended). I tried it lower first, but the flavour wasn't great, at 16 watts, flavour starts improving. It's easy to fill, and can't leak, as it's all sealed - you can even change the coil without emptying the tank, which is a plus. It's hard to see how you could break the glass, but if this does happen, it's not replaceable, as said, totally sealed. Not sure how you're supposed to clean it..It fills from top (by turning - cannot open accidentally) and coils are changed by unscrewing the bottom, they're push-in, not screw in. The air flow adjustment is nice and smooth and easy to use, although I do have to hold the tank when opening both the air flow and to fill, otherwise, I find I am unscrewing the tank connection. The opening to fill is a bit stiff, but manageable.There's a little chimney shaped piece below the drip tip, so if you use a wider tip, it looks a bit weird, as sits above the narrow chimney section. It's a 510 connection, btw.. Just to add: there are 3 types of coils available for this: 1.6, 0.8 kanthal coils and 0.5 plexus Z coils (recommended 15 - 17 watts). As I like a loose, airy MTL, I like this best with the 0.5 plexus coils - it's still slightly tighter than I'd like, but a lot better. Can't say I notice the improved flavour these are supposed to give, doesn't seem much difference to the other 2 coils. Overall, for flavour, I'd rate this 6-7 out of 10 (6 with normal, 7 with plexus coils).If you exclusively vape MTL, like a tight to medium draw, and it's important to you that a tank is leak-proof, then this is a very decent option. Coils don't seem to last very long, but can't say too much yet, only just got it.

The tank is a solid made tank and has less glass than a average tank. I might add the glass is non replaceable if broken. Overall a good MTL vape with decent vapour and reasonable flavour.I prefer the 1.6 coil (10 to 14 watts) rather than the 0.8 (15 to 18 watts) for the following reasons. The 1.6 coils last longer than the 0.6, no crackling sound, more clouds and a cool vape @ 13watts. The only down side is that the flavour can be a little muted.With the 0.8 I found that the drip tip gets very hot, you can hear gurgling and juice consumption is a lot more than the 1.6. Mind you the flavour is much better with the 0.8 coil.Going back to the tank, been using for 2 months and it's good, better than the Isub range, easy to use, easy to top fill and easy coil change.

Amazing tank, upgraded from the ancient iClear 30S but have also used a Nautilus X before which people rave about. I hated the Nautilus X, it's shell is entirely made from glass, which is easy to break or chip, it also gurgles and leaks all the time. While the Zenith is made nearly entirely of stainless steel (I assume) with glass windows which would be very difficult to break, extremely easy to replace coils and fill with juice. Build quality is phenomenal. Innokin have outdone themselves and I'm very glad I gave it a shot.

Well from using their £10 year tank which was ok for the price but leaked to much this zenith is a bit better.Pros: top loading, in leaking, lots of cloud and hasn’t heated up as much.Cons: 1.6 ohm coil seems to taste like burning at low wattage (10watts plus) which is not bad as think it’s for low burning however I do like a warmer puff. Small window but could be a good thing if dropped less to damage.Overall for starter will need to try over coils with it and battery as using 80watt e-learning.