Supershieldz (3 Pack) Anti Glare and Anti Fingerprint (Matte) Screen Protector Designed for Apple MacBook Air 13 inch (2010-2017 Model A1369 A1466)

So far I've had this screen protector for a few days. But I have nothing but good things to mention about it. While the install takes patience, so does any large screen protector. Just go slow and don't worry about the bubbles until you're done. The "bubble card" they include is pretty flimsy though, you might want to use a CC. It fits my MacBook Air 13" just right. The anti-glare is VERY nice compared to before! Knowing that there is a layer between my accidental fingerprints is nice too, because I touched the screen without a cover last week and it took forever to buff out with a microfiber cloth. These screens are not meant to be touched lol.Just try to go in a room that doesn't have a fan going or much air movement so you don't get dust or hair under the screen. Comes in a 3 pack with only a single microfiber cloth (4x4) and a flimsy bubble card. But technically they have a "lifetime warranty", although from what I've read, you have to ship the product back to them before they will replace it. My experience though is that they give you a "one time" overlook to that rule as long as you can show your purchase receipt/order number. And they honor amazon orders.Thanks SuperShieldz.

The size of this screen protector is about one millimeter shorter which means you have really tiny edges/groves around the corners. That being said, I was able to get a hang of it by watching a YouTube video to install it perfectly. I did mess up the first one, did extremely well on the second one (only two tiny bubbles) and made absolutely no mistake on the third attempt so like they say: third time is a charm :)I found this method to be the easiest and the most effective for applying this protector:1) place the protector over the screen, leaving a little space from all the edges2) once you have decided the placement, put three pieces of tapes on the top end of the screen so the protector doesn't move. You can put a piece on each end and then place another one in the center3) now flip the protector over the screen and wipe the screen vigorously with the cloth provided. Now use a flashlight (or use the light on your smartphone) and closely inspect the screen. Trust me, you'll see more lint that needs to be removed.4) with the screen flipped, use an air canister or an air pump (use the most narrow nozzle) and go all over the screen to remove any tiny particles. Use the flashlight so you can see better.5) now, remove the inside film to reveal a little bit of the protector. I like to ago vertical (top of screen to down) as opposed to going sideways. Detach about 50 percent of the inside film from the protector and ensure that nothing touches the screen during this process.6) next, lay the MacBook on its screen such that the screen is facing upwards and the keyboard side is facing you. A tilt angle of 80-90% (weight leaning towards you a bit) works best.7) the MacBook should be now facing you except that it is flipped (screen on the floor, keyboard side facing you). See attached photo.8) now apply pressure from your thumb and fingers and go from the top of the screen (webcam side) to the bottom. You can keep opening the inside film as you work your way down.9) it is ok to remove the screen and reapply provided that there are no particles. Use the air pump to get rid of those particles instead of using the fingers.Once completed, remove the tape (go inside out, meaning start from the side that is affixed on the screen protector and go out). This will avoid removing the screen protector.Lastly, use the provided card to clear the edges of any tiny air bubbles. Afterwards, remove the outer film and you are good to go.I hope this will help you when applying this protector.

Just wanted to say these guys have good customer support. My first order was crammed in my mailbox which severely bent one corner of the package which also bent the screen protector. Needless to say, that corner had trouble sticking to the screen. The seller sent me a new one and I was able to install it and it looks great!There is a greater care needed when installing a big screen protector. It's not like installing one on a smartphone. I suggest thoroughly cleaning the screen with a screen wipe, then place the screen protector on the screen (without removing any of the cover films) and use tape to make a hinge between the screen protector and the Macbook Air's screen case. That way when you remove the #1 cover, you don't have to line up the screen protector, you just fold it over and let it rest on the screen. Also it will help to do this in a bathroom where you have let some steam build up to minimize the dust and lint particles that fall on your screen while you are installing the screen protector. Have a piece of scotch tape ready to pick up any dust or lint that has fallen on your screen. Also as you take off the #1 cover, the static electricity may attract dust or lint, so take a quick look and remove any dust or lint with the scotch tape before placing the screen protector down. There will be bubbles, so you need to use the enclosed card to push those bubbles to the edge, but don't use too much force or you might damage your screen. The MB Air's screen is not as rigid as a MB Pro. My screen protector installed perfectly the first time, so with a little care you can do so too.Pros:-Matte display looks good, hides all the light scratches on my son's MB Air (I should've put a screen protector on from day one!)-Installs somewhat easily-Does not attract fingerprints as much as glossy-Hides reflections and glare pretty well-Comes with 3 protectors!Cons:-Takes more effort to install big screen protector because of greater area which dust and lint can fall on-Does not fit perfectly edge-to-edge, maybe 1 mm gap (but this could be a PRO too because it will make it easier to line up)

Nice item, but could not get a no bubble seal

This is awesome. It fits great and really does the job to cut down the glare. You can see there is a small space between the protector and the bezel, but you gotta have that gap to allow space for it to fit.I messed up the first application so it is awesome there were multiples in the pack…the second one went on great. The screen wasn’t perfect in the first place, but it looks much better now.