10mm LED Strip to Wire Connector 2 Pin(5 PCS) with 20 AWG UL Listed Extension Wire (9.8 Feet/3 Meter),DIY Strip to Power Pigtail or Strip to Strip Jumper,NON-WATERPROOF

I'm impressed. I have LED undercounter lighting in our home. The original setup was "Builder" grade. Our LED strips themselves worked fine but the connectors were an issue. After troubleshooting and discovering the connectors were the issue. We had the builder change the connectors, not once but twice. Finally I bought and installed these connectors from Amazon and the connectors have been trouble free. Best of all , our LED strips light up in their entirety.

If you have ever tried to solder wires to LED strips, you know how much of a pain it can be. Bro, THESE WORKED THE FIRST TIME.I bought this kit thinking "I only need 2 clamps to work. 2 of 5 have to work, right?" LoL. I have tried other clamp down gigs that just didnt work.This wire feels thick and snug. I actually NEEDED pliers to close it! I had to peal back the mount tape and the epoxy on my lights, and triple checked my puncture spot in the clamp. Don't push your strips all the way into the clamps. You want the little teeth right under those copper contacts before you clamp it, and dont move it as you clamp. Those little teeth poke right thru the copper! Tricky Dickey stuff.This kit does the trick for the gap between under the bed and the headboard, FIRST TRY, NO PROBLEM. Like a dream, dude. For real. Saved me so much time, hassle, and I didnt burn myself or anything with a soldering iron!!5* from me, bro.

LOVE the product but I had to kind of figure it out on the fly because the instructions weren't clear. If you understand what they're supposed to do and you have experience with problem-solving and workshop projects, you'll be fine; if you're a first-timer or new hobbyist it might take you a few extra minutes of trial-and-error. Either way, it works GREAT and it's a hell of a lot cleaner and easier than soldering!!! Pro tip: It will appear as if once it's closed it's closed for good but with a little delicate razor blade wielding you can in fact open it up again without breaking it. Will DEFINITELY buy again for any further projects of this nature.

Most connectors are kinda lose and after a little bit of time they tend to slip off the led strip and need to be replaced, but these you could take on tour! no flicker when the cable is moved, top notch! all 4 connectors worked and didn't mangle the LED strip ether. ordering more tonight!

These DO NOT WORK. Don't waste your money. I used them just as the directions stated, and about all that I accomplished was ruining 2/3 of my strip of LEDs. And I was even using non waterproof LEDs with these, so it should have been easy. But not a single one of the connectors worked. The side on the LED strip just chewed up the strip and didn't connect, and the other side wasn't able to break through the plastic wire surround...Overall this just ended up a waste of money both on this product and ruining my $15 LED strip.DO NOT BUY THESE or you will just ruin your light strip.

Bought this for my LED under the cabinet lights to jump across the stove but had to learn it the hard way that solderless connections are typically unstable and will cause LEDs lights to behavior weirdly (in my case flickering and would only light a small part of the strip which was immediately fixed after soldering). I hadn't soldered since 7th grade tech class so it was challenging, but worth it for a more secure connection.

A section of my under-cabinet lighting went out. I was very surprised to find exactly what I needed for a great price on Amazon. I replaced the old 2-pin connector with the new one, and it's working perfectly again.

Use these as a last resort if you dont want or know how to solder.They work 75% of the time and some connections come loose days later