AGFRC Sub-Micro Servo Motor - Upgrade Metal Case Titanium Gear 4.5kg HV Mini Servo for 1/14 1/18 1/24 RC Cars Planes (B13DLM V2)

Very good servos! The dimensions are correct. They function perfectly in my Popwing.

These are the most expensive servos I bought so far but boy, they are also the best servos I had so far. They are going a bit deeper than those I replaced ( Freewing F-16 v2 taileron servos) but still a good fit. These servos are programable, Left or Right turn etc...you need their USB dongle and downloadable software to do so. I strongly recommend them to steer surfaces getting a lot of strain such as tailerons. There are some folk here who gave it a few stars because the servo did not fit. This has nothing to do with the quality! Measurements are clearly posted!

Used as rear axle servo on an AX24. Works great, just a little loud. If they ever revise it I hope they can quiet it down some. Other than that this servo functions perfectly for a low-cost servo.

Great servos! I have several AGFRC servos and they are all of excellent quality and high performance. These B05CLS servos are the same form factor as the Axial AS-1 used in the SCX24 and Losi Micro-B, but note that these are 20T. I took the spline from the AS-1 and put it in this servo so I could use the Micro-B servo saver. Perfect fit. The gears are all metal except for the first from the motor unlike all the plastic in the AS-1 and it seems faster with less play in the assembly. I had an issue with the description previously saying this was a 24T servo spline, but AGFRC resolved this issue for me quickly, so I can attest to their prompt and generous customer service.

Great quality servo for a good price. Fits an Arrma Mojave Grom perfectly. Just needs a 25 tooth servo saver to use with it. Faster than the original servo that was installed by the factory. Would recommend.

Got these on the advice from a couple guys on the web as they supposedly have 180° travel providing maximum elevator travel for maximum maneuverability. I installed these as suggested and on first takeoff one of the servos stripped, one elevator went the direction it was supposed to, the other did not and the plane crashed so hard I'm not sure its reparable. These are supposed to be really good servos but in my experience, not so much.

This servo with a 25T 4.94mm spline is not compatible with basically any other metal servo horn on the market right now. The AGFRC branded one that DOES work is incompatible with the Losi Mini B. Too long, and even if you cut it down, the holes for the ball cup are the wrong distance from the center. Wasted a lot of time trying to make this thing work. The servo itself is definitely strong and seems like it would be durable, but without servo horn compatibility, it's as useless as my locked up EcoPower 827. Why they must make the splines different from everything else out there is beyond me...

This is the first AGF servo I’ve ever used and I bought it as a less expensive alternative to mini servos from NSD, Reefs, and Savox. The NSD RS100, Reefs 99/199 Micro, Savox SW1250MG are no doubt the best mini size servos available but their cost of $60-$75 was more than I wanted to spend on my vintage XRay RC M18T mini-truck. When I saw the specs of this AGF B24CLM for just over half the price of the others I immediately considered it. With power and speed that was almost at the level of the more expensive options plus a waterproof case, titanium gears, and a lighter weight this AGF looked like just what I wanted. But never having used any AGF servo I was concerned I would be disappointed. I am happy to report that I am fully impressed with not only its advertised performance but its next level smoothness and silent operation. This is the most quiet and smooth mini servo I’ve ever seen, even better than any of the above competitors. It turned out to be ideal for my application and at a price that was a significant savings over the top of the line servos. It may have a plastic case vs the largely metal ones of the big three but that makes for a lighter weight, a critical factor when building a 1/18 scale truck. In fact I have been so impressed with this little servo that I will definitely try one of AGF’s full size models in the future. So, if you need a high performance mini servo and value smoothness and near silent operation as much as speed and power and you are looking for a high volt capable yet lower priced alternative to the big three manufacturers this B24CLM by AGF may just be the best choice going. I rarely give out five star ratings but this servo earned it.

Used on my Turbo Timber Evolution as the rudder servo packed up

slightly larger than stock servo, but works great!

One of the servo stop working just after installed

All i can say is stick with ebay!!!

Conforme, livré très rapidement