Bones Skate Bearings Cleaning Unit

Great product. Cleaned my bearings spotless

Does its jobs perfectly.

Unless you have spare parts to build one yourself for free, this is an excellent cleaning tool for your bearings. Easy to use. My bearings have not been cleaned in years, but also my board has been used rarely (less than 5 times per year). The bearings had a decent/fair roll to them before cleaning, now they roll almost forever on one push! Here is my method I used to clean: Tools- floor bike pump (substitute for compressed air) isopropyl alcohol 91% Bones speed cream 1. load up bearings without the shields, bearing balls facing up. 2. fill a little less than 1/3 91% isopropyl alcohol. (did not want to waste and really did not need a full 1/3) 3. close and shake for 30 seconds, open and spin bearings. repeat this step a few times until bearings seem free from dirt when spinning. 4. dump and refill bottle a little less than 1/3 91% isoprople alcohol. close and shake again. alcohol in bottle should be clear. 5. use floor pump with attached exercise ball nozzle tip to blow into bearings to dry and remove any excess debris. 6. once bearing is dry, apply 2 drops speed cream onto ball bearing side. spin bearing a few times. 7. reinstall shields. This method should get 90-95% clean. This is my first time cleaning the bearings. Maybe if I had compressed air can and rinsed the bearings until all debris can not be detected when spinning them. I personally don't need to get them 100% clean for my uses so this method is sufficient for me.

I recently needed to clean the 16 bearings on my quad skates. Several bearings weren't spinning freely. I used 91% Isopropyl alcohol as the cleaning solvent. I followed the instructions by filling the container to 1/3 and shaking. The bearings came out clean and I used Bones Speed Cream Skate Bearing Lubricant before I remounted them. The bearings now spin freely and are quieter. I also noted a speed difference as well. To the users that rated this low because there was no solvent, please read the description thoroughly. It says: * "Includes directions. solvents not included" The cleaning kit is simple, but it does the job. Some of you could probably make your own cleaning unit for less but time is money. I, personally, would rather spend my time actually cleaning my bearings than making my own cleaning kit. Pros: * Container is sturdy and should hold up well. * Perfect size for fitting 8 bearings with the spacers, while conserving solvent. * Seals pretty well when shaking with solvent. * Has everything needed (except solvent) to clean 8 bearings at a time. * Helpful instructions. Cons: It could be a little cheaper - but it works as it should.

I got this just because I had some extra cash, and honestly, while it makes the process of cleaning your bearings easier, it does seem like I spent a lot of money on it. If you look up a youtube video you can easily make one from scratch. But then again, the bottle itself is pretty thick, thicker than most plastic bottles you can get for cheap. Using hard solvents could destroy whatever homemade cleaning unit you make, so I still think this is a good choice. And the small size means less solvent to waste, as you shake the little thing, rather than use a small basin and let your bearings soak for a while. Also, less of a mess, since the bottle is sealed, and you don't have to worry about spilling potentially hazardous liquids around. Recommended for for anyone who has extra cash.

I LOVE this product! I was skeptical at first because you could just clean your bearings in a glass or metal container, but after trying this product, I realize that it makes it so much easier, efficient, and faster to clean my bearings. All of my bearings fit perfectly on the screw. I used Acetone as the solvent, shook the bottle with my bearings locked tight on the rod, took it out, dried the bearings with a compressed air can, put 2 drops of Bones speed cream, and it's perfect. Instructions came with the product, so you won't be clueless on your first cleaning. It's definitely worth the $!

Couple it with isopropyl alcohol, citrus cleaner and your Redz bearings lubricant; skateboard will last and go fast

The Bone's Bearing Cleaning Unit simplifies the process of bearing cleaning until it becomes streamlined, fast, and efficient. All you do is remove one side of shields on your bearings, and then line them up through the bolt in the middle of the cap while alternating the bearings with the given spacers. Then, you simply cap it with the metal piece, fill the bottle with alcohol and cap it, shake for as long as you want, uncap the bottle, remove the bearings, and replace the shields. Simpler done than said, but effective none the less. Also, the container can be used to carry other small skates gear and parts, saving you space in your pack. Overall, an amazing product with simple versatility.

I dislike the fact that In the listing you show the speed cream and the bones bearing puller...but that's not actually part of the package when received. So why show it? Rather just remove what is not included

Given that BONES are the best skate bearings on the market, you’d expect nothing less from the kit the supply to clean them. This bearing cleaner is of the highest standard with everything thought of and catered for. After all, in reality it’s a plastic bottle with a threaded metal shaft holding a wing nut and some spacers…. However, BONES have managed to knock the ball out of the park with a product you would usually consider to be ordinary and not worth manufacturing to a high standard, by going the extra mile to equip you with something that you’ll likely only buy once in your lifetime, it’s robust, made extremely well from the highest standard of materials, and it bears the BONES logo that not only sets you apart from those using the generic bearing cleaners, it shows that you mean business when it comes to how you decide to maintain your bearings and approach your skating. This product is highly recommended.

Parfait, rien à redire!

The bearing puller was not included

Diese Lösung zum Reinigen von Kugellagern ist genial und erleichtert die Arbeit ungemein. Die gereinigten Kugellager rollen butterweich und das mit einem Bruchteil der Arbeit, die ich vorher hatte. Sehr empfehlenswert!