Kanto SP26PLW 26" Bookshelf Speaker Swiveling Floor Stands - White, Pair - Maximum Speaker Weight 30lbs per Stand - Standard and Extended top Plate Included - Internal Cable Management

Excellent stands, excellent finish, perfect height, extra feature for Kanto speakers but will work with all. These stands are very sturdy and provide a great platform for any size speaker. The stands come with two sizes of top platform and have holes to mount Kanto's own speakers via a 1/4-20 bolt. I currently have a set of Jamo S803 bookshelfs in white on top of of these stands and the whites match very well. With the largest plate on, the speakers hang off about an inch front and back, but the plate hangs out about one half of an inch on each side. The small mount will be hidden by these speakers, but use double sided tape for extra stability. I don't believe Kanto does not explicitly say that these stands are fillable for extra weight, but I will tell you that they are indeed fillable with a simple assembly change, as follows. The bases are a heavy slab of metal with a separate plastic finishing piece that completely covers the top and sides of it. NOTE: Face the label on the bases so its visible so the feet screw in properly and easily. The center shaft that runs to the top plate is an oblong shape. Both the base plate and cover have cutouts, on one side of the oblong shape, to run cables through. To seal the bottom so that the shaft can be filled, simply rotate the inner base plate 180 degrees so the cutouts don't line up. Pay attention that the cutout on the cover plate and the 45 degree cutout at the top of the shaft are both facing the same side, the back. The inner base plate's cutout will be facing the front, but the cover plate will hide it. You'll see when you put it together. I was able to fit 4ish pounds of long grain rice in each shaft. You will be able to fit more sand than rice, weight wise, but sand is a pain to clean up if it gets tipped over on accident.

This is a good design and well made stand! Very impressive build quality doesn’t take away the spotlight from the speaker. The product arrived with a double boxed packaging and the inside parts also carefully packed to ensure they’re protected for shipping. Heavy base plate added great stability. Two sets top plates offer is very considerate feature. I believe this product is well worth buying!

Amazingly well engineered! Best of class! Extremely solid and stable. The cable management makes the cables disappear. Rubber bumpers for hard floors work well. The top plate is foam rubber coated for vibration dampening. The sound is great. The top plates can even be angled to optimize the sound direction. I could not ask for anything better.

These are very heavy. All steel. Minimal parts. Easy to put together. No chance of slippage due to the 2 screws that lock it into place on it's highest extension. I am very impressed with the quality. This makes my other brands made of synthetic wood and or glass look like junk. I should have bought more of these Kantos. This is the real deal. Very pleased!

Exceptional speaker stands at an incredible value. In search of an ideal support for my MA Bronze 100 bookshelf speakers, I faced the challenge of finding a balance between budget constraints and stability requirements. The Kanto stands emerged as the perfect solution, backed by multiple reviews instilling confidence in their performance. Not only do these stands flawlessly complement the aesthetics of my MA speakers with their matching color, but they also offer a practical and aesthetically pleasing solution for managing speaker wires. Negotiating banana plugs through the stands posed no issues, showcasing the thoughtful design catering to aesthetically pleasing placement considerations. Stands are solid and well built, with provisions for 2 base plate sizes! One standout feature that caught my attention is the toe-in capability, allowing the base plate to rotate. This innovative design element enhances the overall listening experience, demonstrating Kanto's commitment to meeting the demands of discerning audiophiles. In conclusion, I am thoroughly satisfied with the Kanto speaker stands and will undoubtedly explore their offerings for future audio setups. Kanto has undoubtedly earned my trust as a reliable choice for premium audio accessories.

I previously purchased the older design of the 26" speaker stands and loved them. I had a need for another set, but taller and liked my old Kanto stands so much, I didn't think twice about getting these. The design is similar to the old ones, but the metal plate on the bottom has been notched out to allow for cable management (the older model didn't need this as it didn't come with rubber feet and had more ground clearance). The top plate also mounts differently to accommodate, what I assume, is the new speaker designs with a mounting hole on the bottom. Instead of coming with spiked feet and pads, it now comes with spiked (carpet) and rubber feet (hard wood, tile, concrete, etc.). The design is just as solid/stable as before and looks almost exactly the same, which is good. The fit and finish is similar, but I did experience some issues with assembly. I've read some reviews on the old model/design that people had issues with the threaded bold holes (no threads, couldn't get a screw to thread, etc.), but I didn't have any issues with the ones I purchased previously. This new model did give me some issues. Almost all of the bolt holes needed to be chased out with a screw as the paint (I actually think powder coat) needs to be cleaned off the threads. One of the holes had some weld too close to the threads and I had to file it down to get a screw in. Unfortunately, I did not have a tap set to fix any of this the easy way and had to just carefully use a screw, file, punch and hammer to clean this up. It would be good if the threaded holes would be chased with a tap at the factory to clean it all up (my only complaint). I would absolutely buy these again and would recommend them to anyone looking for a speaker stand at either 32" or 26" heights (good for sitting, bed or near a desk). They are very sturdy, built well and look good.

After much research for a slim line floor speaker unit, this adjustable beauty with extreme STURDINESS knocked it out of the park! Easy to assemble, tools included- minor simple instructions. This pair accommodates a Bose Dbl Cube (old I know but still awesome sound) and a hefty Polk. Could not be happier !

Very pleased with the quality and ease of use. The stands were packed very well (box inside a box). They are sturdy and the adjustability is great. The stands come with two sets of feet. One set for smooth/hardwood floors and one set of spikes for use on carpeted areas.

Acheté pour supporter une paire d'enceintes surround de 2,6 kg chacune. Entièrement satisfait de mon achat: - emballage costaud et c'est nécessaire, le carton pèse plus de 16 kilos - montage facile, trois vis à serrer et c'est réglé! - aucun outil n'est nécessaire puisque deux clés allen sont fournies - sous le plateau de base on peut visser, au choix, 4 patins en caoutchouc (plutôt pour les sols durs) ou 4 pointes de découplage (moquette) - ce même plateau est lesté par une plaque de fonte, ce qui explique le poids de l'ensemble, et rassure quant à la stabilité - les colonnes sont creuses, pour y passer les câbles des enceintes - chaque que support est fourni avec deux plateaux supérieurs, au choix 18x11cm ou 18x18cm, recouverts d'une matière antidérapante type caoutchouc - tout est en métal avec un revêtement granité noir mat, et donne une impression de grande solidité. Esthétiquement c'est mastoc mais sobre, j'aime beaucoup.

I was impressed by the quality. It was better than I expected.

Ich habe die Lautsprecherständer für meine Monitor Audio Silver 100 Surround-Lautsprecher gekauft, nachdem mir die Originalständer schlichtweg zu teuer waren. Auf der Suche nach einer hochwertigen, aber preislich attraktiveren Alternative bin ich auf die Firma Kanto gestoßen. Zuvor war mir der Hersteller nicht bekannt, doch nach kurzer Recherche war ich positiv überrascht: Kanto ist ein kanadisches Unternehmen, das seit vielen Jahren im HiFi-Bereich tätig ist und dort einen guten Ruf genießt. Ich habe die Ständer schließlich über Amazon bestellt, und die Lieferung verlief absolut reibungslos. Schon beim Auspacken konnte man sehen, dass Kanto großen Wert auf Sorgfalt und Qualität legt. Die Verpackung war sehr durchdacht und ordentlich. Besonders beeindruckt hat mich, wie systematisch alle Kleinteile – Schrauben, Inbusschlüssel und Gummifüße – in einer separaten kleinen Pappschachtel sortiert waren. Nichts wirkte lieblos hineingelegt, sondern alles hatte seinen Platz, was einen sehr hochwertigen ersten Eindruck hinterließ. Die Montage der Ständer war erfreulich einfach und in wenigen Minuten erledigt. Das Material wirkt solide und stabil, und die Ständer machen insgesamt einen robusten und langlebigen Eindruck. Mit einer Höhe von etwa 82 cm passen sie perfekt zu meinen Surround-Lautsprechern – die Hochtöner liegen nun exakt auf Ohrhöhe, wenn ich auf dem Sofa sitze. Das Ergebnis ist nicht nur optisch sehr ansprechend, sondern auch klanglich ideal. Insgesamt bin ich mit den Kanto-Ständern rundum zufrieden. Sie bieten eine hervorragende Verarbeitungsqualität, sind durchdacht konstruiert und haben ein sehr gutes Preis-Leistungs-Verhältnis. Für mich eine klare Empfehlung – besonders für alle, die eine stilvolle und funktionale Alternative zu teuren Originalständern suchen.

Die Lautsprecherständer sind sehr hochwertig, stabil und einfach einzustellen. Ich nutze sie für meine Back-Surrounds. Aufgrund der Schrägen kann ich leider keine Lautsprecher an der Wand montieren, sodass ich Ständer brauchte, die höher als 1m eingestellt werden können (weil sie sonst niedriger stünden als meine Sofa-Kopfstützen). Es wird eine Schaumstoffmatte mitgeliefert, die man auf die obere Platte legen kann, falls man die Lautsprecher nicht anschrauben möchte. Dies habe ich getan und alles hält bestens. Ich bin super zufrieden und kann die Ständer bestens empfehlen.

Great product. Needed new stands for my new SONY HT-A9 speakers. was a little worried because the speakers just sit on top of the stand platform but they are super stable on a wooden floor. Cable management is good and they look very nice and minimalist and the colour goes really well with the speaker colour. Great purchase. Not the cheapest but considering the cost of the speakers, it is well worth the money.