Greenstik Materials 3mm x 10m Self Adhesive Coloured Vinyl Pinstripes Car, Vehicle Graphics & Detailing (Pinstripe Blue 3mm)

Fantastic and good quality for the money

Some negative reviews say that this pinstripe doesn't stay on. You need to thoroughly clean/prepare the surface with a good degreaser. I use either methylated spirits or cellulose thinners. If you are using thinners, make sure that the paintwork is original factory applied as this is unlikely to remove the clear coat. To stop the pinstripe ends (where you cut) from peeling back, apply a dab of clear coat/lacquer. I have fitted hundreds of pinstripes and graphics to vehicles over the years this way without any problems.PS, if the temperature is cold, warm the area first with a hot air gun/hairdryer to aid adhesion. Also, very gently rub the pinstripe with a clean cloth, but be careful not to catch the ends - prior to applying the clear coat.I hope that this helps everyone who are having problems with this product.

I used this product to customise a diecast corgi batmobile.I have used similar but they had a top film (which this one doesn't)So this tape was not quite as easy to use, but still a good product

Decided to go 'black and gold' with my bikes colour scheme so decided to order this product. Never used it before so aside from the inherent difficult in pin-striping, it was made easier by the quality of the product so it made the process much easier. Would recommend. The colour matched the description in the advert and it arrived a bit earlier too. No idea how it will fare on a wet ride but seems to stick well and there's plenty on the roll so can re-do it if needed.

sticks good, not cut straight

The edge of the tape was uneven and feathering when removing from the reel, not fit for purpose.

Went on ok

GOOD