Reverse Osmosis 1/4" Hose, Yetaha Water Flow Adjust Valve Regulator, RO Water Tank Valve Filter Connector for Water Purifier Pure Machine Water Dispenser, Plastic Material White

After one of the water filters plugged up in our refrigerator we had issues with the ice maker over filling into the bin.I tried using pressure regulator that did stop the over filling but the water would only trickle from the door when filling a glass. Even after replacing the filter housing under the frig and the ice maker it would still over fill. So I decided to install one of these into the tubing running up the back of the frig and adjust the flow manually. After four five test runs the water no longer over fills. I put it inline close toe water solenoid for easier control and it works great. Only wish i thought of sooner but hey.

This small flow regulator valve works perfectly when it is installed correctly and used as it was designed. The valve knob allows for fine-tuning of the water flow and should only be adjusted by hand, never with a wrench or other tools. When installing be sure to note the direction of flow so the valve can work as intended. There is a flow direction arrow printed on the side of the valve. Also be sure to use the included mounting bracket so that the valve doesn't get damaged while in use. Likewise, the water lines need to be securely seated in the valve in and out connections to prevent leaking. Be sure to use the included connector locks to keep the water lines securely held in place. Finally, always be sure that the water source is turned off before installing.

Make sure tubing is seated all the way in as it may leak if not

Used it as a bypass valve to control flow to a reduced fitting. It works fine, but doesnt let much of a flow by.

Piece of junk. Didn't work to reduce water pressure to 2 bar as required by my espresso machine.

No issues. Used on a turbidity meter to control the flow. Worked exactly as intended. I bought several and had no issues until my boss came and overtightened the thing and broke it. It takes very little force to turn these. do not over crank on it.

This valve appears to be less adpt to seizing than the brass ones. So far it allows throttling of Reverse Osmosis membrane flush so less water is wasted to the sewer line.

I use it for my aquarium rodi unit. I no longer have to adjust the flow. Just open the faucet all the way and it hits where you set it and you are done until you shut it off.