ATV Flat Tire Protection Kit

I really like this product. It's been in my mower tires for over a year now and still working. I had quite a few leaks caused from Black Locust thorns that it plugged with no problem and no new leaks. It plugs the holes as you get them as they say it will. Great product.

This is the second time I've bought this product. I bought one initially to test it out and I was very impressed! I had put some used tires on some used rims for my side by side and I had a couple of them leaking slowly from the side of the rim. I put this stuff in, following the directions and have no more leaks! It's been about a week with the first one, and zero loss in air pressure. I took my side by side out on the trails and thrashed around a bit, still no leaks! This stuff is legit! It comes with a valve removal tool and red valve stem covers to show you which tires you've added this too. Very easy to use, no issues whatsoever. Saves you money having to take your tires somewhere to have them look at them.

Amazing product. Used in my ATV tires . Before they’d leak don in few days . Going two months now and still Holding air.

As my title says, this stuff worked better than I thought it would. In fact it worked so well today I will be ordering more. I say today because how can you tell if something like this is actually working... never getting a flat for years? In other words, if it fixes a flat before your eyes it works, otherwise you really don't know. See I had a lawn mower tractor that developed a real bad tire leak a couple of days ago. The way it happened was I cut a Russian Olive tree down, if you know what one of these trees are like, you already know why I got such a bad leak. These darn things have thorns that can get to be almost as big around as a pencil, and are just as sharp as a needle. Moreover, these spikes as I call them, can get to be 3" to 4" long. In short, if you run over one you will have a flat tire, period. That is unless you have this stuff inside the tire already. To make matters worse, if you run over a branch from this tree, you won't only get one or two thorns/spikes stuck in your tire, because as you drive the branch bends easily (only the spike are ridged), so before you know it you will end up with a half dozen of these spikes all the way around your tire, as if the whole tire has a new tread made up of a Russian Olive tree branch. Trust me on this, it will happen just like this. After pulling a half dozen 2" to 4" inch spikes out of the tire, I knew if I took it to a shop they would require me to put a tube in. With this inflation that isn't supposed to be an inflation going on, I'm sure it has made tire tubes today cost almost as much as the whole tire cost me just a couple of years ago. So I thought I'd put this product to a real test... I already have some in my John Deere 2305 tractor. Honestly, it shocked me how quick it worked. It worked so fast I didn't even need to add anymore air to the tire, because all the holes were shut. Pretty amazing stuff if you ask me! I followed the directions, they were easy to follow and the process was easy too. I removed the valve stem, put in 5 ounces of the solution, then put the valve stem back in, aired up the tire and it was instantly fixed... amazing, especially considering why the tire was flat... I should have taken a pic of the spikes. I did roll the tire around a bit, then mounted the tire back on the tractor and went right over and mowed my elderly neighbors lawn, so it got plenty of rotation time. That was about 4 hours ago and the tire is still rock hard. Like I said, I'm ordering more because after seeing this everything we have that runs slow will have this stuff in the tires! Oh, one other thing. The fix-it flat stuff in a spray can, DO NOT USE IT for applications like this! Because that stuff if left inside will actually glue your tire to the rim. Tires have been ruined trying to pry them away from the rim after putting in fix-a-flat, or whatever that crap is called. Sadly this "TireJect" is not recommended for high speed travel, it will through your tire out of balance. So use the fix-flat stuff in an emergency, carry one in your car just in case. Just make sure once you get the tire fixed wash the tire out real good before remounting it. I have never written such a long review in my life, but if you got through it I hope it helped. It's not often a product lives up to it's claims today, but this one in my opinion surpasses it, so I felt the need to say something. Besides, the warning about the Russian Olive tree just may save someone a lot of frustrations.

Everything about it was good, it worked on my tractor tire Wich was flat, it was new last year but it was the only one out of 4 that didn't hold air, I'm assuming it was a bead leak and tireject sealed it, and now it holds air and stays up, good product worth the price in my opinion

I would not expect this to seal sidewall penetration or save an old tire from dry rot, but when it comes to road surface tire penetration there is absolutely no better or faster way to repair a flat. 1. You don’t have to remove the tire from the vehicle. Losing half a day waiting for a fixed flat tire is at an end! 2. While a bit pricey, it comes out to be a bit cheaper than a shop trip for smaller UTV or mower tires and A LOT cheaper for larger truck and tractor tires. In 2024, we spent over $350 on flats. 3. We have spiny honey locust trees and bushes invading our farm and deal with flats at least once a month, usually more often than that when clearing fence lines and trees or maintaining pastures. Not to mention the aggravating repeated flats on the same tire are gone. 4. The injector is a bit messy, but the residue will wash off in water if it is cleaned before it dries. 5. So far of the six treated tires on various machines, we’ve had no repeat flats or leaks. 6. Red valve covers come with the packaging so it’s easy to see whether a tire has been treated. 7. This works on tubes and no tubed tires. 8. I’ve used this on my truck, SUV, riding mower, UTV, tractor front tires, and backhoe front tires. Works as promised every time. If the manufacturer is reading this review, I would appreciate a simpler dosing and injection system - especially on the gallon jug. I’m thinking of something like the pump on a lotion bottle where one pump equals one ounce for example. And provide more than one injector hose. Attach a string or other keeper on the valve removal tool. Losing this tiny tool would make the whole system inoperative. Overall, I’m a lifetime fan.

I had a flat on my Hustler mower with Slime in tire I didn't want to take tire off and take to tire repair center. I saw several Videos and thought I would give Tireject a try. Worked great with slime in tire

I have a Kioti compact tractor with a loader. The front tire had a bad leak - so much that when I tried to pump it up, the air was going out as fast as I could put it in with a loud hissing sound. I have tried various products in the past on garden tractors etc. with varying levels of success. I actually thought I was going to have to jack the tractor up, remove the wheel, and install and inner tube. But, I decided to try this product first since it had good reviews. I followed the directions to the letter, including the guide as to how much fluid to use. When I was finished I drove around for about 5 minutes. I am happy to say that 24 hours later, the tire has not lost any air! This product exceeded my expectations.