MaxiCOM MK808S-TS OBD2 Scanner: 2026 Same TPMS Tool as MX808S-TS MP900-TS MS906 Pro w/ 3000+ Active Tests, 32 Service, TPMS Pr0gramming Relearn Retrofit, Full System, Up of MK900BT MK808BT Pro

This scan tool has made my life easier in diagnosing issues with cars. Its ease of use and the ability to read VINS is awesome, it gives you all the information you need to troubleshoot and fix the issues. It has saved me a lot of money by not having to pay dealerships or other shops with the more expensive units to program keys and fobs, reset multiple systems, calibrate various items in various vehicles. it covers all brands of vehicles and their special functions that dealerships charge for. I love the automatic updates; the system tells you there are updates, and you just click install and it does it. I love the search feature on codes, and it takes you to the most prevalent video or web page for that issue. Great system I totally recommend!! You will NOT be disappointed!

So first off, I'm not a mechanic. But having an Audi A8, Mercedes AMG, and a few Acuras gets pricey for a diagnostic fee every time an error displays on the dash. I don't work on my own cars per se, but I would do something simple like replace a battery or an emissions hose. -- The first day I received the unit, I got it all setup. My MDX had a system error on the Tire Pressure TPMS and it's always a 79.95 fee to have them check anything at the dealership. So I walked around the vehicle in the TPMS mode, got close to each tire, and pressed TRIGGER. The sensors immediately responded, and the issue was that due the weather warming up, two of the tires pressure was too high. Instead of the car telling me that information, it just says System Error in the Dash. Shame on you Acura ! Anyway, the device tells me the pressure of the tires, the battery status and something else I don't remember at the moment. It will also let me clone my original sensors to new Autel replacements when my batteries do eventually fail. So the very first day, I saved 79.95 plus tax by pressing a button. The next two or three uses will have almost paid for it. The only downside is that the setup and creating an account is kind of lame. You have to do it on the website, you cannot do it from the application, though it says you can. That was my question to tech support. Within a few minutes I had a response explaining how to complete the process, and it is not clearly laid out when doing it the first time. Other than that, there are a lot of videos that show you the power of this device. I got the bluetooth version because I don't want to be tethered to a vehicle by a cable, but the next model down is a great bargain now too. Amazon did have the cheapest overall price by a few dollars because I'm a prime member. And I had it the next day. Competitors charged for shipping it was 7-10 days delivery, which is unacceptable in this day and age. I Love Amazon's delivery process.

Great tool for running diagnostics on your vehicle. Purchased this model to program new TPMS sensors, being able to clone your own $20 TPMS sensor beats paying $70 for each from the mounting and balancing shops. This reader read all the sensors with ease and programmed the new ones in seconds. OBD diagnostics and other features work well and the manufacturer keeps everything up to date within your subscription period.

Amazing. Has all the features I need and many more. Worked for every car I tried it on and was very easy to use. Worth every single penny.

You really can't beat this for the price. It's a good scan tool and bi-directional tester. It regularly receives updates for every brand of car I know of and then some. It also is easy to use and setup and gives you all the data you could want from every module in the car. Pretty much turn it on, plug in the VCI, and your off. It auto detects the vehicles VIN, so there's no messing around. Worked great recently figuring out which TPMS sensors were dead on my gf's car. The build quality is also very good, its a study tablet, and comes with a screen protector installed out of the box. Long story short, you won't be disappointed in one of these.

Great product

I purchased two scanners, The XTool D8 and the Autel Autel MaxiCOM MK808S-TS. I initially got the Xtool because of its price, but was a bit disappointed by its lacking of displaying data. Its got LOTS of data to display, but what I was looking for was specifically the status of the shift solenoids on my Toyota. It also seemed to have a tad slower data point record rate than the Autel scanner, so I decided to get the Autel and compare. This is what I found between the two. Both displayed the exact same data about my car, which leads me to believe the data I am looking for is either just not available ( which seems not the case since you cab bidirectional control them), or only available on more expensive scanners. This was good to know because now it just came down to which scanner to keep. What I like about the Autel: It looks great, has multiple USB ports on the top for charging, and an HDMI Port. Its also very well constructed. I also love the fact its got a place to hold the Bluetooth OBD dongle on the back of the scanner itself. That's where it stops. The plastic case has no hinges on it like the Xtool case does. Its a thin section of plastic which will for sure crack after so many open and closes and then the back will just always be flopping and it will never close. The tool itself seems to be of low end android hardware. Sure it may be the latest version of android, but the hardware its running on could be better. The interface is sluggish, the touch screen doesn't respond right away some times. Trying to swipe the screen to goto the next screen will sometimes register a finger tap and not a swipe and send you into a section you did not intend. Over all the UI is extremely lacking, and not sure if software updates can fix that. The Xtool is very fast, very responsive. The Autel software itself could be done better compared to the XTool I had as a reference. One issue I have with Autel is when doing a bidirectional test, before given the option to turn something On or Off, you get to pick some data points you also might want to monitor while actuating stuff. Well on this particular section, all the data points are arranged in a grid as buttons to click to select, and you have to swipe left and right to go thru like 20 - 30 pages of stuff. If you do not select something, you are not allowed to continue to just actuate what your trying to actuate. The XTool lets you actuate without monitoring anything else, and if you wanted to, you can easily scroll top to bottom in a nice laid out list format with check boxes. One single large scroll screen, not like the Autel where you have to swipe left and right across lots of pages. (This can easily be fixed with software updates). Another thing I noted was when recording the data, it was not recording everything I had selected. Monitoring them showed changes, but when playing back the recording, something were not captured. I'm not sure if this is a bug or what, but whats the point of not recording things you selected to record. "IF" Autel updated its software to be a bit more like XTool's, I might consider Autel over Xtool, but the sluggish hardware is a bit of a problem for me. Im not sure why Autel, despite the poor hardware, seems to record data points more frequently than the XTool. This really sucks for the XTool when trying to capture something and its just not logging fast enough. This seems it could be solved in software too. Since XTool has 3 years of free updates, and Autel only has One, I'm sticking with XTool in hopes future updates improves the record speeds.

DIYには最適だと思います。コードレスなのが特によい。日本車、アメ車、ヨーロピアン、全ての診断、調整ができました。最近の車はエラーを消したり、ブレーキパットの交換すら診断機が無いとどうにもなりません。これは、TPMSの登録もできます。R35中期以前の車にお乗りの方、自分で登録できます。後期からは車だけで登録できるのに・・・。説明書は英語版をダウンロード。サポートも返事くれません。ですので自力でやらねばなりませんが、あれこれ時間をかければ出来ると思います。注意点としては、トリガーがとにかく反応しない。何回も何回も位置を変え、あれこれとしている内に反応します。私も苦労しました。

Autel MaxiCom MK808S-TS . Excellent Scan Tool. I have used Autel Code Readers in the past and wanted to upgrade to a Bi-Directional Scan Tool. Looked at all the brands available. Autel offered the best fit for my needs. Easy to use and navigate through the functions. Was on sale from Amazon at a great price and had to purchase it. Great value for the capabilities of this Scan Tool. I spent many months looking at Online and YouTube reviews of Bi-Directional Scan Tools. There is a lot of information out there. Sometimes confusing and overwhelming when deciding to choose a Scan Tool that fits your needs and budget. The Autel MaxiCom MK808 Series kept coming up the leader in my search. Very pleased with this Scan Tool and the MaxiCom has already saved me money on my diagnostic capabilities and allows me to do so much more with its power and technology. I would recommend this Scan Tool as a great choice for DIYers or Serious Car Enthusiasts. Even full time Mechanics. Andrew D, Toronto,Canada

I did receive my order Autel MaxiCOM MK808ST couple of days ago, furst it arrived fast. Second I loved it because of how much care i found in it. Since i have 4 different cars already im preparing fir the updates and will take a full tour on this 4 cars. I will try it on 1. Geely Emgrand 2014. 2. Hummer H3 2006 modified to 2007. 3. Ford Focus ST 2013. 4. Ford Fusion 2011. Im pretty sure i will get great results. I highly recommend to get this product if you want to save Time, Money & messing up your car by others. Good luck to all.

Uno de lo mejores equipos que pueda haber, e manejado otras marcas y esta no le puede nada, incluso al x431 que tengo. La atención del servicio postventa fue muy buena. Y lo mejor trae incluído el tpms 👍

working good, recommended