EarlyGrow 93763 Medium Seed and Herb Domed Propagator with Vented Side Height Extension, Green

assembly was not difficult, easy to take apart for storage. quality is very good, and it is very sturdy. i would recommend caution with the top part, since it is just a bit thinner, and a high fall would likely crack it. make sure to clean it since the vent holes aren’t very large for great airflow. i use this for propagation and it works wonders to keep humidity in. 10/10 for cloning, the only failed propagation i had was a baby cucumber that probably succumbed to rot. germinated my peppers this year in this and they sprouted very fast. works well with a heat mat underneath to keep things warm but not hot. i use a t5 light and an old hand me down light and both shine bright through the lid. overall very useful product. Would definitely buy a bigger size if they made it.

This prop box has exceeded my expectations! It is keeping my high humidity terrarium begonias very happy. The quality is amazing- the plastic is very strong, and the parts all fit together perfectly without any troubleshooting. The hardest part was figuring out how to put the height extender together (there weren’t a lot of instructions and I am slow haha), but even that was easy enough. I haven’t opened the vents because I want it to be completely sealed, which it is doing very well, but I’m sure the vents work perfectly for people who want them. The plastic cover is crystal clear for all of the light to come through. I only wish there was a greater variety of sizes of these so I could pick one slightly larger than this one, but not as big as the larger one. I should mention, though, that the smaller one fits perfectly on a shelf in my FABRIKOR Ikea greenhouse cabinet. It takes up half of the shelf and leaves room for other plants. All in all, I am really impressed with this prop box, and if you’re on the fence about it, get it!!

No instructions needed! I was able to assemble the box in 10 minutes. Just be careful not to screw it in too tight. Wait until everything is in place to tighten and secure the screws if you're afraid of cracking. Overall, it feels sturdy. It fits on my plant stand and looks aesthetically pleasing. I ordered the screws, but will leave them off unless I travel. I like that it protects my plants from the sun's UV rays and the fan feature for ventilation is a great addition.

The quality of the plastic is very good. The fit is perfect unlike many reviews reporting warped plastic. But one of the round green vent covers was missing from the main cover. I couldn't find a way to report the missing piece or request a new one through Amazon. However, since I can tape over it and just use the other vent cover I won't be returning it. The price is good and ultimately I think it will be a minor issue but I'll update my review if it turns out not to be.

Product looks and feels sturdy. Ordered plus the expansion compartment and It arrived intact all the way to Nigeria without any contouring of the plastic or flaw. Saw a review about how it lost shape but still went ahead to purchase anyway cos I knew if it happened I will only need to heat it up a little. It will serve a very long time but the size is the only downside to it. I expected more. Had I researched harder I’d have gone for a bigger size - if there’s any - so I’m constrained to give it a 5 star cos that was totally my fault. Overall it’s a good buy and serves its purpose.

I recently became interested in propagating passionflowers. I had been trying to root cuttings using the ziplock bag method, but it required too much space, was hard to maintain, and was not producing results. I chose this propagator for the extra height provided by the extensions, which is necessary for the longer length of cuttings recommended for passionflowers. I received it and set it up a week ago along with a seed warming mat. There are no instructions, but I figured it out as assembly became pretty clear once looking at the parts. I transplanted all my cuttings from the ziplocks into small pots. I only found roots on a couple cuttings. Today I checked my cuttings for signs of roots and found almost all of them had rooted! One is almost ready to be planted, and a week ago I didn't notice any roots at all when I switched it to the dome. While I did change the growing medium when switching from bag to dome, I am pretty sure it's the dome + heating mat that gave these cuttings what they needed to root. I'm really psyched! I also really like how much I can fit in this little dome though it takes up very little room. It is much tidier and way more attractive than ziplock bags. It's essentially a little greenhouse/terrarium that stays very humid inside while still allowing enough air flow to prevent mold. I keep a puddle of water on the bottom of the dome which allows the plant containers to soak it up as needed, and induces root growth. My dome did not have any warping and maintains humidity very well. With the heating mat on, I can take off the lid for a while, put it back on, and condensation will appear again within 30 minutes. Even during the current heat wave going on where I live. I'm really loving this thing!

Overall, I have been very happy with this unit. I unfortunately had a little of the same issues that other reviewers had about the plastic being a bit warped and too rigid to fit correctly. Based on the plastic used, I believe the problem has to do with the storage and shipment of this unit. If it gets heated up, the plastic softens a bit and would warp. I placed mine inside the greenhouse where it can get pretty warm 90°+. I pushed the extension and lid into the base to ensure it was secure and would not pop off. I taped it to the base. After a couple days of that, the base is no longer warped and fits perfectly. I marked off 2 stars for this inconvenience. We should not have to do that honestly. Other than that, it does what it is supposed to. They should experiment with a different plastic to see if they can improve on the design. Even with all that said, I would likely still purchase another one because it is convenient to add height on the fly instead of being stuck with only a short lid.

Fantastic quality for the price. Easy assembly Highly recommend!

Germinar semillas de plantas mexicanas

I originally purchased this for cloning cannabis plants. It is serving its purpose very well and I am really impressed with the quality of the material. I feel that this product will last a long time and will be worth the money spent. Happy customer overall. ⭐️⭐️⭐️⭐️⭐️ 5 Stars All The Way!

This is made of quality plastic and I found it easy to assemble. The extension provides about 4 inches height which mskes it perfect for what I need it for.

The description of Medium pot green house is to vague. So here are the dimensions. Great size tray is 8” by 14”and 2.5” high. The lid is 8” by 14” and 4.5” high , also comes with a extending collar 8” by 14” and 4” high to increase high to max of 8.5” for plant growth from a seed to blossoming flower 🌸. When all part are installed. Sturdy and will last for years. 2 mm thick pvc parts. A great value

Excelentes condiciones y calidad. Me preocupo leer los comentarios negativos, mi artículo sella perfectamente, tanto la tapa como la extensión.