Pro-Lift C-2036D Grey 36" Z-Creeper Seat , Black

So I realize there are a ton of negative reviews on here that say this is poorly made, breaks easily, wheels break/come off, cover comes ripped, etc. So I took a chance and ordered it since it was pretty dang cheap (around $26). I gotta say it's pretty awesome and I haven't ran into any of those issues. It was kinda annoying putting it together, took me about 20 mins but I'm not that smart (: I would just say to make sure you really tighten the wheels and the frame together and you should be good. I used it to repair an exhaust leak I had and it did a great job. I didn't have to sit there on the cold cement (did this during winter time) and I could roll around underneath the car to get what I needed. I'm kinda chunky and weigh 230 lbs and am about 6 feet tall. When I put it into chair mode, it didn't bend under my weight or anything like that. When I was creeping around on the floor with it, it rolled fine, and didn't crack, bend or do anything under my weight. Also to get it from creeper mode to chair mode is pretty easy, and easy to do. Everything just worked perfectly. The only issue I ran into was it didn't get very close to the floor, so I had to have the jack stands all the way up. But overall, this creeper is amazing ESPECIALLY for the price I paid.

Excellent product

I love the creeper, it’s awesome! The pros & cons: Pros: -I love how I can use it under the car, and when working on the side of the car, like when I need to change brakes. -I like the “wow factor” when people see me go from under the car, to a sitting position within seconds (watch your fingers!) -I like how it was only $25 with free shipping -I liked it so much that I bought one for work and one to keep at home Cons: -uncomfortable in the rolling seat position, if sitting for a long period of time. -the wheels come loose and you have to tighten them often. -watch your fingers, cuz I got mine pinched a couple times when going from flat to folding seat. The one for work I use just the big portion out of the 3 sections, and I kneel down on it and use it to do construction layout. I have to constantly bend up and down, but having wheels for my needs + my normal knee pads, means I’m saving myself a lot of time by rolling around! Haha everyone is amazed at how quickly I can measure and strike chalk lines on the floors just rolling around. Gotta love the creeper, just remember to tighten those wheels every day!

This is very helpful for working on vehicles! Very easy to assemble and switch back and forth from seat to creeper. The green pair does seem to come off pretty easily but the product itself seems pretty durable. Rolls across my garage floor easily and is actually very comfortable.

my boyfriend loves this, glad i got it for him. very sturdy

Worth the money, good price. Easy assembly and very sturdy. My husband uses it in his garage and loves it.

Good quality. It gets the job done

I bought this 2 years ago. I use it mostly in the sitting position. After about 5 uses, the four sitting position wheels fell off. I really liked the comfort and height of creeper and was sad that it broke. But was able to repair rather than buying a new one. I repaired them creeper by: 1. Purchased the "HOLKIE Caster Wheels 2 inch with No Brake Stem Casters, 3/8" -16 x 1"" on Amazon (About $15). The original wheels had thinner bolts, but there was a top insert which was 3/8" wide. So on the frame, the top hole was 3/8", and bottom hole was smaller than 3/8". 2. Purchased four jam nuts (these are half-height nuts) ($4 from local hardware store) I think they were #10's, but I'm not sure. Take caster wheel to hardware store to make sure you get the right nut. The reason I needed this is because the caster's stem were too short to use the caster's included nuts. The included nuts threads started too high in the nut, and wouldn't grab the stem. The Jam nuts are half-height of regular nuts, and more importantly, the threads start sooner in the nut. 3. Drill the frame bottom holes to widen them to 3/8". 4. Insert the new caster wheel and use jam nut to tighten. New wheels work great. They are the same height as original wheels, so can still use creeper in flat-configuration.

It does the job for the price you pay for , perfect height for low seating to do required work with good quality and solid built materials. You would just need tools to tighten bolts fitting during installation the parts.

Good quality. All as described

Per adesso sembra perfetto.

Bought this for my husband. He loves it. Can be used and a seat or can be laid flat for those low jobs. Very sturdy Does not feel cheap. Well constucted. I would recommend this

Easy to assemble and works well, but was too high with me laying on it to get underneath the car - would have needed to jack the car up much higher than the trolley jack or axle stands would go. Good stool though!