PETG Black 3D Printer Filament 1.75mm 1kg, High Speed PETG up to 300mm/s, High Strength New Formula, Excellent Layer Adhesion, Warp Free, Compatible with Most 3D Printers

This filament printed well, it works with the Bambu labs PETG HF print profile. The layer adhesion is good, and the value is decent if you find it on a sale or buy in bulk. I only used this as a test run before buying in bulk on Polymakers website. The color is decent, it is orange, but it is not as orange and Bambu labs or Elegoo’s PETG HF. All of the PETG I’ve gotten from polymaker has a glossy sheen to it, so keep that in mind if you are making something that doesn’t need to be glossy.TLDR: This filament prints great with the Bambu Labs PETG HF profile, has good layer adhesion and durability, and the color isn’t stunning.

Basic black PETG from a quality supplier. Wound well, with no tangles the prints are durable and good looking. I am not good at keeping my filaments dry but even with the abuse this stuff strings way less that a lot of other PETG that I have used. Polymaker is one of my go-to brands for any type of filament - excellent quality at a reasonable price!

Very nice shade of green if you ask me. A little shimmery too. Prints well, im around halfway through the spool with no tangling or feeding issues. Good filament!

Use in my Prusa mini. Prints will, good adhesion, no delaminations, no spaghetti.

I have had very good luck with Polymer's PETG - even this new formulation is great.Colors are repeatable, cardboard recyclable spools, no filament tangles and I like how they handle the end-of-filament (taped to roll, no kink) so that my machine can consume an entire spool then switch from one roll to another without any issues. The settings the manufacturer provides work well with my Snapmaker U1.

I purchased this PETG filament based on Polymakers good reputation for 3D print filament.I am printing on a SnapMaker U1 using the Snapmaker Orca slicer with "Generic PETG" since the slicer does not have a Polymaker specific PETG profile which includes speeds, retraction, etc.This is my first time using PETG and so far the prints have been as easy as PLA with almost no stringing so the generic PETG profile is working well.The prints so far have stuck to the SnapMaker build plate very well. I have to let the build plate cool in order to get the print to release.Layer adhesion is good. Appearance is very good. So far no tangles or nozzle clogs, but these can happen at any time for any filament and any printer.I have only consumed about 110gm of this 1kg spool at the time of writing this review, but I am optimistic it will continue to print well. It is now June in eastern USA so I may have to dry the filament at some point, but I have a good drier.There are less expensive filaments on the market, but I can recommend this Polymaker PETG filament.

It's Polymaker, it's PETG so it's good and does the job. I use mostly Polymaker (like 90/10) because it's consistantly good quality and color matching, I can print a partial roll that's 3 years old and finish with a new roll and the color will match (obviously not talking about black but all their colors). Many other brands can't seem to match color from one batch to another much less across years of filament. To me that's worth the few extra $$ they cost.

This is great petg. This is my go to brand for petg. Theres great consistency and print detail. I frequently get the black and print with no issues. The dark blue and dark green look great. However on my latest spool of dark green i noticed there’s been a color change. Is brighter and has less of those sparkling bits that really made it stand out. First picture is the old formula second two are the new.

La marca es garantía

Excelente producto

Amazing filament but! read below how to get good results.The filament comes vacuum-sealed with silica bag in it. Unfortunately, it's not helping. The filament if full of moisture and your print will turn out in a spiderweb of stringing and oozing with a lot! of surface defect (popping bubbles).Do the following instead:1) dry the filemant for 8+ hours. I dried mine at 60C for 12h2) use the print profile for this plastic for this particular filament. Don't rely on "generic pla" profile, don't dance around with "what is the best temperature". Download the bloody profile. Google it.if you do 1 and 2 you will get GORGEOUS results.See the photos. The vertical surfaces are so smooth I had to find an angle where you'd see any texture on the photo. No print lines, no bubbling, super smooth, super color consistent.

印刷中に定期的に絡んで、ツッパリ。強制印刷中止。ここまで酷いのは初めてでした。

Solid all-rounder filament.