can this be used to turn off a 110V fan motor in a fan coil unit if leaking

It can be used to detect the water, but would require it to be connected to a relay for it to directly switch a fan. If you look in the documentation there is a very simple circuit you can make with a solid state relay (search amazon for B00DDDFUZG). We recommend this relay because it is HORSEPOWER rated. This means that it has been tested for and is approved for use controlling motors. If you have DC power, this sensor, and the relay above, you can switch any motor load up to 3 HP, or any solenoid up to 50 amps.

Does it trigger when wet or submerged? if i use it for a wster pump, with a relay, would it stop as soon as the water level lowers or until dry?

This device is not providing a “contact closure” it is providing a trickle current between the two contacts when water with some ionic content is present. The Leak sensor behaves as an open circuit when no water is present, and behaves as a (roughly) 1.4MΩ resistor when water is present. Water has to come in contact with both of the metal feet on the sensor to trigger a device. The leak sensor will continue to provide the trickle current until both feet are no longer in contact with water.

What is the upper temperature that this can handle? can it be used to detect hot water from a water heater prv?

Hello, The leak sensor is rated to handle temperatures up to 150F. I would imagine that this depends on how hot the water is that is coming from the hot water heater.

this sensor detect low resistance water ?

Level Sense LS2600 Surface Liquid Sensor connects to a control device accepting an analog or digital input. If you are using this in home electronics projects, please take note of the following: • This device is not providing a “contact closure” it is providing a trickle current between the two contacts when water with some ionic content is present. • The Leak sensor behaves as an open circuit when no water is present, and behaves as a (roughly) 1.4MΩ resistor when water is present. The resistance of it depends on your water. • To confirm if the device is working, place the ohmmeter probes directly into water approximately 1.5” inches apart and take a reading. Then place the sensor in water and connect the ohmmeter to the red and white wires. The two readings should be similar. • To get the best circuit design, put the sensor feet in water and measure the resistance with an ohmmeter. Use this resistance in your circuit design. • In the unlikely event you have “non-conductive” water, it can be easily rectified by sprinkling some salt around the sensor location. The water will absorb the salt, the salt will ionize the water, and allow it to conduct. • If you are using this sensor as an input to an Arduino or raspberry Pi, it is recommended to use either an Analog input, or a “PULL UP” input where the sensor is taking an input to ground.

Desertcart Logo

Deliver to Argentina

For best experience Get the App

DOWNLOAD THE APP

WE SOURCE ITEMS FROM

UAE
UK
India
USA
Japan
KOREA

Customer Services

About Us

Customer Support

Description

💧 Stay ahead of leaks—because your home deserves smarter protection!

EXTENDED 30 FT REACH - Covers large areas like utility rooms and basements with ease
DIY SMART HOME READY - Perfect for Arduino, Raspberry Pi, and custom electronics projects
ROBUST RELIABLE BUILD - ABS housing withstands temperatures from -10°C to 65°C for year-round protection
PRECISION LIQUID DETECTION - Stainless steel sensor feet detect water with ultra-low resistance
SEAMLESS SECURITY INTEGRATION - Works directly with most home alarm systems for instant alerts

The Floor Water Sensor is a precision liquid detection device featuring a 30ft cable and stainless steel sensor feet, designed to integrate seamlessly with home security systems and DIY electronics. Operating between 5V and 24V DC, it offers reliable, corrosion-resistant monitoring for water leaks in critical areas like water heaters, utility rooms, and sub-floors, ensuring early flood detection and peace of mind.

Common Questions

Are the products genuine and authentic?+

Yes, all products are sourced directly from authorized retailers in the US, UK, UAE and India. We maintain strict quality control processes and verify each product before shipping. All items come with applicable manufacturer warranties and are covered by our standard return policy.

How long does delivery take and is it reliable?+

Delivery times vary by destination country, typically ranging from 3-9 business days. Each order is fully trackable through our system. We handle all customs clearance and use reliable courier partners for last-mile delivery. You'll receive regular updates about your order status via email and our app.

What is Desertcart? Is it safe to order from?+

Desertcart is an international e-commerce platform operating since 2014. We securely process thousands of orders globally each day. Every product goes through our quality verification process before delivery, and we provide end-to-end order tracking, 24/7 customer support, and a comprehensive returns policy to ensure a safe shopping experience.

How is product pricing calculated?+

Our prices include the product cost, international shipping, import duties, customs clearance, and local delivery charges. We handle all customs and import procedures, ensuring there are no hidden fees upon delivery. PRO members receive additional benefits including free shipping.

ChatGPT - opens in a new tab Perplexity - opens in a new tab Claude - opens in a new tab Grok - opens in a new tab Google AI - opens in a new tab

Trustpilot

TrustScore 4.5 | 7,300+ reviews

Ali H.

Fast shipping and excellent packaging. The Leatherman tool feels very premium and sturdy.

1 day ago

Pooja R.

The customer service exceeded my expectations. Perfect for buying products you can't find elsewhere.

1 week ago

View all Trustpilot reviews

Control Method	App
Sensor Technology	Contact Sensor
UPC	712038376599
Manufacturer	Sump Alarm
Product Dimensions	6.4 x 1.56 x 1.27 cm; 204 g
Are Batteries Included	No
Item Weight	204 g

Floor Water Sensor for Flood and Leak Detection (30ft)

Details

Description

Specifications

Have a Question? See What Others Asked

Common Questions