543ST 960730026 3 Bin Soft-Sided Grass Bagger: Fits 54-Inch Poulan Pro Riding Mowers

Nice quality, just as advertised. This price is about $200 less than at the local retailer.We've been using this bagging system all summer and heading into fall -we have no worries of it holding up. This was purchased for a Zero-turn Poulan Pro 54"ZXT mower. This bag was not designed for it, however, the savings was too hard to pass-up. We modified it quite easily. It comes with two choices to mount on the bag of the mower, each having a pin that sits in the hitch-hole on the back of the mower. We bought two bolts and drilled holes into the engine guard on the back of the mower, mounting the top of it to the mower (given how strong it appeared to be). We did have to revisit it by putting two additional 2" mettle brackets to support the weight three bags full of grass can carry. Again, for $200 savings, it is well worth the easy modification.I see many inquiries as to what mower this will fit, call them :), here's the number (not listed in the post) 1-800-849-1297.

I bought this bagger for my Husqvaran (sorry on spelling) 2005. I had to call the service number on the instructions to order the black metal bracket kit so that bagger can actually fit on there. The 2005 riding mowers have an slant to them so the two brackets you get will NOT fit no matter how hard you try. The bracket kit is free of charge and took about a week to ship. Didn't have any problems ordering it. The bagger itself is good quailty. 3 bags! I have a huge yard, so it's nice especially in the fall. It fits on well enough. It isnt designed specifically for the 2005 Hus. but it does the job. I've only had it for 2 months now. It got me through the fall so no more raking! It's well worth the price and cheaper on amazon. I did my research. So 5 stars from me! P.S. While waiting for the bracket kit to ship, I used one of the brackets that came with the bagger and used tie downs to strap it to my riding mower. Worked like a charm until the other bracket shipped! My husband thought that was tacky, but he doesnt do the yard work so he can shut it. lol

It installs easy and works as advertised on dry grass. Into 3rd year of hard use so far. Comes with several mounts so fits about all mower but order the one that fits your mower deck width...unlike my neighbor---dah! Be careful when backing up as you can crack the dome if you back up into a tree or a garage wall. Go ahead and buy a couple of spare rubber 'strap and hook things' that hold the chute to the mowing deck (look in the manual) as they stretch out after a year or so. They are cheap on amazon, so get about 6 so you have several years of backups. Check the bolts on them every month to be sure they are tight as they work loose after a month or so. Lock-tite helps. Biggest advice is to not store the mower outside as strong sun degrades the baggers dome material and isn't good for the paint, tires or the seat on the mower either. Overall a good, solid buy! Last comment is to be careful when opening the dome to empty the bags... If you just give it a flick you will break the dome up near the hinge. I found that the best method is to flip the seat forward, pull the upper half of the chute and lay is on the mower behind the seat and then raise the dome and empty the bags. The chute part lying on the back behind the seat then provides a stop for the dome and keeps it from breaking itself. Check your time pressure at least every other mowing. I one tire gets low, it will cause ugly stripes in your yard.

It's literally 4 big parts plus the bins. I didn't need tools for my Husqvarna 54" mower. Really easy to install and take off of the mower. It's one litter pin and a couple of elastic hooks and it's off. Of the 4 main parts, 3 are plastic, the fourth is a small tubular steel frame. This couldn't cost much in materials, so $425+ dollars is excessive. (It's also the least expensive I could find on the internet). I trust Amazon sellers. Had a bad experience trying to buy this from E**Y.

I needed a bagger kit for my Husqvarna TS354XD 54inch riding mower. I reached out to the vendor and provided my model information to ensure it would fit my unit, and so I ordered it this last spring. When I went to go use it for the first time, the chute is definitely not able to fit on Husqvarana. The bags and rack fits but it is useless without the chutes. Since I ordered it 45 days ago, I am not able to return it. The vendor really screwed me. DO NOT TRUST any information they print or provide!!

BEEN USING FOR OVER 10 YEARS AND I ABSOLUTLY WOULD BUY AGAIN! WORKS GREAT!

For the bigger 54" mower you are really limited to the AYP product, which is what I received, or the $$$ from the dealer which is probably still AYP. Regardless, this is my summary after one use of this bagging system purchased 2 weeks ago. Two hanger options were sent with the bagger which simply required me moving bolts to different locations on my mower. An easy install. Bags, hangers, mounting plate and top were all sturdy and fit well. That's about where the wheels fall off. The upper tube was not cut correctly and required about 5 inches to be removed which then allowed the bags to fill more evenly. The lower chute broke on my first mowing when it snagged on a blackberry vine. There is a notch in the front of the chute that fits over a metal hook on the mower deck. That notch and the surrounding molded plastic is about half as thick as the rest of the chute material?? This required doubling the area with plastic from an old chute riveting, gluing and then bolting the lower chute to the deck to check against further damage.Update: 8 more uses and the bagger is holding up well, filling evenly and seems to be doing the job it was intended to do so upping the score a bit to reflect that. I do wish the bags had a more dense material on the front sides to keep down the dust. Having 3 bags sure cuts down on time needed to empty the grass clippings.