NZXT H200 - Mini-ITX PC Gaming Case - Tempered Glass Panel - Enhanced Cable Management System - Water Cooling Ready - Black - 2018 Model

Best case i've ever owned, its beautiful, top quality, excellent airflow, PSU schrod, and small form factor while allowing for many full graphics cards and power supply. I personally used an SFX power supply, platinum grade and was able to really open up the bottom, increase airflow and cable management but a larger PSU would work as well. the 240mm radiator space works great, great airflow and easy installation. I went through two other cases that did not work out for a mini itx build before landing here,highly recommend.

I was putting a build together for my wife and narrowed it down to this case. In fact, I liked it so much that I had purchased a 2nd one for myself. It has all of the features that I needed without wasting any space. It's a bit more noisy than what I'm used to, but my previous build was also fully water cooled. I won't knock a star off for that. I'm currently waiting for my aio cpu cooler to arrive, so I'm sure that'll quiet things down. All in all I'm very pleased with the sleek design, features, and functionality of this case and I'd highly recommend this case.

so this isn't a "compact" ITX case like say the Thermaltake Core V21 or anything small like that- it's basically just the H500 but smaller. it's a fantastic case to work in though- i haven't cleaned up my cables as I plan to take this case apart again to paint the cable cover, but the space for cable management is great. comes with 2 fans installed, both run fairly quiet and do a good job cooling, fits some larger GPUs (I have the GTX 1070 EVGA Black SCX 3.0, for size ref) and has space for a regular size PSU. all in all, this is a great case. i think this would be good for someone who's wanting to get a smaller case for saving space on a desk, or as an intro to ITX. also, props to NZXT for their phenomenal customer service.

This is a very solid case, no sharp edges, good quality finish inside and out. The front panel fit is very tight and to me that is a good thing since it means there won't be rattles in the future. Cable management is extremely well thought out so even having extra cables for an ARGB AIO wasn't difficult to handle. With a 10.6" long 1080 TI, because the front rad/fan mount is removable and pulls out the front instead of the back, there's actually room to install a 240mm standard radiator, which was a surprise. The vertical gap cover piece which can be used for a liquid cooler reservoir/pump is pretty nice, though if you are using an AIO with the rad hose connections on top, there isn't quite a big enough gap on top to comfortably route the tubes over the top of it. It could work but it looks like it would put too much strain on the radiator hose inlet/outlet. My only real gripe is that the thumb screws (with the exception of the ones that hold the tempered glass panel in place) aren't very good. The paint on them seems like an afterthought, and while they function and none of them have stripped out or anything, the threaded holes they screw into aren't very smooth feeling. The ones for the metal side panel are captive, however, which is nice. For me, there were a lot of additional little holes here and there on the front and bottom panels that I felt the need to block off. I went for a positive internal pressure fan setup with a front to rear air flow and it seemed like that pressure differential wouldn't be possible otherwise.

This case has pretty good airflow after removing the dust filter in front. SSD placement is perfect, but you have to pay attention to which side the SSD has its connectors, you can't use T-Force Delta SSD or it will be upside-down. GPU clearance could be an issue, PERFECT fit for dual slot Radeon VII card and length is no issue, but there are a lot of 2.5 and 3 slot cards that aren't gonna work. I did have a clearance issue with the top fan. It's tight, and when you try to add a phanteks LED ring it becomes too large for some mobos. I had to get some Noctua Low pro fans to add the phanteks halos, but totally worth it and a nice upgrade overall.

I made the jump to ITX with this case and I couldn’t be happier. It looks great if you like a minimalist look while showing off your components. The build quality is great and there are modular features that make a world of difference for doing a compact build (ex: a modular bracket that holds the radiator and fans for an AIO). The only catch is, like any ITX case, it can be a challenge to work in such a small space. Airflow can also be a potential issue so I’d recommend liquid coolers for both your CPU and GPU if possible, especially if you have plans to overclock. Overall I strongly recommend it for smaller builds and the challenge of working with a smaller form factor is absolutely worth it.

Great looking, easy to work in*****. Really love the size and build quality. the red is very bright, and no defects anywhere. ** depending on the board wire management is a pain due to placement of the front SSD BAY compared to sata placement on board. ALSO i found that with the modular power supply that cable management worked. but not in the neat way we all desire to see when the back panel is off. may be user error however

hasta ahora esta jalando bien

Arrived in one piece, quick delivery, item as described

Very nice case. Well built with solid construction and easy to cable manage. The tempered glass screws are the only minor annoyance. Front panel cables and rear fan cables are already organized out of the box so less clutter. They are also cable tied to the case making them easy to adjust the slack and make them longer to reach the motherboard without making them a mess. Front panel power and storage LED is already connected to a single connector as opposed to multiple small connectors makes connecting it to the motherboard a breeze. There are also cable routing spaces which is great to see. Rear exhaust fans are combined into one cable which is good to see for ITX cases with limited fan headers Very impressed with this case for the price. For those with larger 2 slot gpus or larger air coolers or water cooler blocks, this is a great option. The two included fans are a tad loud, but including two exhaust fans is a nice bonus.

Es la primera vez que me armo una computadora gamer de formato ITX. No tengo problemas de temperatura y compatibilidad con componentes como la fuente de poder. Lo unico que se me hizo dificil ya que es la primera vez que armo en este tipo de gabinetes fue el AIO de Corsair H60. Su aspecto minimalista me gusta y aunque se que hay gabinetes ITX mas pequeños este no deja de ser una opcion para colocar gpus de gama alta.

Los materiales son buenos, y el espacio para cable management también. El espacio interno igual es bueno, aunque si utilizas un AIO de 240/280 pierdes un ligero espacio para una mayor compatibilidad para Vcards de terceros en modelos custom. Se puede solucionar colocando los fans por la parte delantera detrás del panel frontal, aunque se tendrían que comprar unos filtros para polvo, ya que no se podría utilizar el que incluye.