VEVOR 2/4 Frame Electric Honey Extractor with Adjustable Stand

My husband researched this like he was purchasing a new car. He is absolutely thrilled with the purchase. Works well and exceeds his expectations. Very quiet. He has changed from a 5 gallon bucket for catching the money to a 3 1/2 gallon. Fits underneath better. We did purchase felt pads for the legs to prevent them from sliding while in use.

My daughter got me this for an early Father’s Day gift. I wanted to try it out today, so I pulled four fully capped medium frames from one of my hives. After uncapping, I loaded the four frames into the extractor. Spun them for approximately 3 minutes on 50% power, upped the speed to 90% and spun an additional 5 minutes. Flipped frames and repeated the process above. Did an excellent job and removed 99% of the honey. The operation was smooth with absolutely no vibration at 90% power. No need to hold the machine at all, and it was not bolted down, simply sitting on concrete floor. After completing the four frames, took the motor assembly off, removed the wire cage and rinsed all the parts with cold water with the garden hose. Cleaned up easily. 13 pounds of honey from four medium frames! I would highly recommend.

Great extractor for the price. Easy to put together and operate. Was very surprised by how quiet it was. In summary here are pros and cons. Pros Good price, works well, easy to use and put together. Disassembly is easy but you do need a tool to loosen the mounting nuts. Cons Slight defect on one of the hinges for the lid. So that side has a small gap, no biggie. Slightly awkward to put med frames in the perpendicular slots, but they do fit. Disassembly is easy but assembly can be a bit fiddely due to the arms that attach to the motor/ central bar not being rigid. They basically flop around and it’s fiddely to align them again. Also no biggie. Lastly the hole for honey gate is a little high up the side of the drum so you need to tip the extractor quite a lot to get the last couple gallons out and if you tip it a 5 gallon bucket no longer fits underneath. I set it up on the longest leg setting as well so this is the main reason I didn’t give it 5 stars. Luckily I’m strong enough to have no issues picking it up and putting it at an angle on top of the bucket to drain the last bit. The extractor seems well made but is not overly heavy which helps. FYI don’t tighten the main 4 nuts on the motor/ central bar too much, I think you could bend it out of shape if you are not careful. I basically used a socket by hand to tighten so there was no play. That was good enough.

Bought this on a sale last fall for our beekeeping and honey harvesting needs. It sat in the garage for months until closer to this summer when we were ready for first use. Not opening it for months concerned us, but everything was fine. We mounted it onto a rolling wooden cart for ease of movement and use. Assembly of the unit was simple enough to follow, and the motor kicked in right away when the safety lids were in the closed position. Rotation speed is scalable, and it processed 4 medium honey supers at a time. Clean-up was doable, but getting getting hands and cleaning cloths/brushes to the lowest levels through all the wire holding brackets was tricky. We are very satisfied with this electric motor product, purposely choosing it over a manual-cranking product --- we would highly recommend it for hobby beekeepers not processing commercial volumes of honey.

This item is junk! This was our first time using this honey extractor and I was excited because we have always used a hand crank extractor. We were extracting our honey and after completing 5 frames of honey we turned it off so we could put more honey supers in to extract and when I went to turn it on nothing happened. Tried unplugging, closing lids tighter, checked the outlet to see if it blew the GFI and it still didn't worked moved the extractor to different outlets and tried again. Still nothing! Contacted Vevor and they wanted a video showing it did not work. So we did that and then they wanted (on video) for us to take the electrical box apart to see if there were any loose wires...did that! Then we were told to take the covers off and squeeze the connectors by hand. We did that. Then they responded by sending us an operation video and it was in Chinese and we could not understand any of it. We responded by telling them we had purchased this item in good faith and we expected them to honor the warranty and we wanted a full refund since this was clearly a product fail. We were told we would have to pay for the shipping to return it or we could keep the piece of junk and they would refund $90.00 of a $260.00. Vevor does not stand behind their products and clearly sell junk! DO NOT BUY THIS JUNK EQUIPMENT!!!

Decided to a spend little more and get an electric extractor instead of a hand crank. Haven’t tried it with frames full of honey in them yet. Tested it out with empty wood frames with plastic foundation and 21st bee frames. Both super and deep frames. Spun with no problems and seems like it will work well during extraction. Only adjustment I had to make was one of the metal pieces on the lid that hits the switch to let it know the lid is open or closed. It was pushing in too much not letting it spin and also not letting the lid sit completely flush. Just loosened the screw on the metal piece attached to the lid. Pushed the piece in, then tightened while holding it in place. Lowered lid back down. It sat flush and made proper contact with the switch for the motor to run. Definitely recommend it for anyone else getting started and don’t mind spending a few dollars more to not have to crank a handle. Which means instead of standing there turning a handle you can do something else like decapping the next batch of frames to go in.

Worked well. We have a small apiary, only 6 hives, and only harvested seven 8 frame supers. Sure beats my old hand crank unit. I would like to support an American company but can't justify the cost difference for my hobby operation. I will say it doesn't fit 4 medium frames at once as it's advertised to.

This was our first year extracting honey from our bee hives, and we are glad we chose this extractor. It is quite and does a great job releasing honey from the frames. There are some tiny screws involved in the assembly, but nothing to take away from this product. We can place four frames at a time into the extractor. I will be building a simple wooden stand to hold it in place during use. There should be no surprise that a rotating tub will "walk", but the movement was minimal. It was easy to assemble, and the instructions were surprisingly clear and easy to understand. A simple rinse and the tub is clean and ready for another season.

Schweze Ramen passen nicht sonst habe nicht probiert

Ottimo, maneggevole

Extracteur acheté pour ma récolte d'août 2026 (17 hausses de 9 cadres). J'ai attendu de tout passer avant d'écrire mon commentaire. Franchement un bon produit. Facile à monter. Bien stable à condition de visser les 3 pieds au sol (plaque d'agglo par exemple). Rien à redire, ce produit est impeccable et à un prix très correct.

Imballato bene e pare che funziona ma ancora non lo uso per smielare. Manca il rubinetto e le viti per montare i piedi.

No me gusto las revoluciones que tiene asi la miel no sale correctamente a no ser que el operculo no este cerrado y pueden probar ustedes haber si no. Es correcto lo que digo