TP-Link BE10000 Wi-Fi 7 Range Extender RE653BE | 10 Gbps Tri-Band Wireless Repeater | 2.5 Gbps Ethernet Port | Internet Signal Booster for Home | Up to 2800 sq.ft, 128 Devices | 6 GHz, MLO, EasyMesh

The TP-Link BE10000 Wi-Fi 7 Range Extender is an absolute revelation for anyone tired of spotty signals and buffering woes—it’s transformed my entire 2,500-square-foot home into a seamless Wi-Fi paradise with blistering tri-band speeds up to 10 Gbps that handle 4K streaming, gaming marathons, and a house full of smart devices without breaking a sweat. Setup via the intuitive Tether app was a breeze, syncing effortlessly with my existing router in under two minutes via WPS, and the four high-gain antennas with Beamforming tech blasted away dead zones, delivering rock-solid 6 GHz connections even through thick walls. The 2.5 Gbps Ethernet port is a lifesaver for wired setups, while EasyMesh compatibility means I can expand my network endlessly without hiccups. Sleek, compact, and future-proof for Wi-Fi 7’s low-latency magic like MLO, this powerhouse has me ditching my old extender for good—TP-Link just redefined effortless, elite coverage!

As always great product. Is as described by tp link great enhancement for my network no drop issues extended with no issues easy installation and configuration.

Works as advertised. Getting about 2.7-3.7Gbps according to its status page, from where I have it stationed. The 2.5Gbps ethernet port works the same and runs the 2.5Gbps hub at full speed. Setup was pretty easy, however I did have issues on multiple occasions getting to the status page via the Tether App. Additionally, avoid binding it to your TP Link ID as it just never worked for me, and just use the local password. CON: This runs HOT to the touch. Ensure it is positioned in a spot with good air circulation.

Right out the box, slapping it in an outlet and getting it set up with tether and easymesh is really easy and works really well. Much better signal with this new setup. Unfortunately that's not all there is to it. I have a tplink be600 I use with this, and expected to be able to carry over the MLO band as well as the others, it don't work that way, you just get a completely seperate MLO band, which makes no sense to me. Also I have an ethernet cable set up between the two, taking it from wireless to ethernet immediately worked, but also started some weird issues. It no longer shows the the original 2.4, 5, and 6ghz bands connected via easymesh from the original router. Weirdly they all still show up in the extender's wifi bands and work as if they originally did, not sure if they got any more reliable though. Help online is outdated at best, but supposedly easymesh should still work over ethernet. Otherwise, the extender works very well, like I wish extenders did a decade ago. I'd give 4.5/5 if I could, especially if you can get it for around $150 like I did. 250 for an extender is a little steep, especially since mlo doesnt work with easymesh.

Added this to my existing TP Link Router to extend signal. Easy setup, definitely a signal improvement. Would recommend to others.

This TP-Link RE813XE Wi-Fi range extender did a wonderful job of getting my new 6G band to reach easily in the upstairs of my home. It was super easy to set up with WPS so I had it up and running within mere minutes. The range covers the upper part of my 3200 SF house without any issues and connectivity is smooth and consistent. As expected, the 6G band of my upgraded internet doesn't penetrate walls as easly as the 2G and 5G, but this booster means I can keep my 6G signal no matter where I am in the house. Woks well with my iPhone 15 pro and my laptop when using a 6G capable wireless adapter (even my relatively new high end laptop didn't come prepared to capture the 6G band signal, though it runs pretty well on 5G.

Does not work in EasyMesh setup with other TP-Link products. Initial setup was easy and everything was seemingly up and running quickly with this added as another node in my network. However, within minutes the main router (GE800) began rebooting. I figured there must be a firmware update. Updated this extender, no updates for the main router, updated my other satellite (BE800) in the mesh network. Time to try again....same result. I went into the main router DHCP settings and reserved a specific IP for the extender thinking that maybe there was a conflict being created. Restarts all around and time to try again. Same result. I saw various online reports of similar issues when enabling MLO, MU-MIMO, and other settings. Tried everything. Same result - within minutes of connecting this extender to my network the main router reboots and continues to reboot over and over every few minutes. Now I have the extender unplugged and just taking up space as a paper weight. Without the extender as a new mesh node my network is very stable with no issues. I have had good luck with TP-Link products in the past, but this one misses the mark and doesn't feel like it was ready for release and doesn't play nice in existing networks. I'd avoid this one for now until new firmware is released that fixes the issues.

Excellent speeds for for wifi 6e, compatible w Xfinity. Consistently fast speeds throughout the house. Happy w product