VEVOR Hydraulic Lift Table, 500 lbs Capacity, 47.2" Lifting Height, Double Scissor Lift Table Cart with 4 Wheels and Non-Slip Pad, Manual Hydraulic Lifting Cart for Material Handling & Transportation

I did an audit and inspection of the unit the moment it arrived at my hotel. I checked the welds, hydraulic assembly, electrical box, wheels, foot mounts, wired remote and wireless remote. Everything was satisfactory. The only small issues I had were that the plastic end caps were installed damaged. It wasn’t from shipping. The entire unit was shipped inside a sturdy box and inside a styrofoam housing. Also, the top of the electrical box has two dents on it. My only conclusion is that this damaged occurred at the manufacturer. Not a major issue, but regardless, a very small issue. The cables come zip-tied together. I would recommend some cable management prior to use. There is no storage tray to put the wired remote in and the electrical hydraulic cabling is all over the place which is a major hazard. The electrical cable that is attached to the hydraulic assemble is extremely close to the top frame that elevates. The cross bar grazes the bend restrictor. It is a terrible design. Regardless, if you do the cable management, as suggested, it will not be an issue. I recommend doing a safety check prior to every use. It is a bit on the slower side which is fine. It allows a more precise height change when required. I rather have that for what I’m doing, which is installing multiple servers that weigh between 30-35 kilograms (66-77 lbs) each. The wireless remote has an up/stop/down function button. Warning: Once you press up/down it will automatically go in that direction until you press the stop button (square button). The wired remote is for precise elevation change. I used a Milwaukee M18 Top Off Power Supple which is rated for 175 watts to run the unit. It did not drain the battery at all. It didn’t even use one bar of the 3.0 M18 Battery. The Electrical Hand Lift is not heavy. It stats it’s around 30 lbs which is manageable for me to get in and out my truck. The 360° wheels with locks and optional stationary foot stands are a major bonus. It’s rated to lift 150 kilograms which is 330 lbs. I haven’t tried that limit and most likely won’t need to. Having that ability is a bonus though. You can refer to the attached video of the functionality. Overall, the Electrical Hand Lift performs flawlessly. I still gave the unit 5-Stars due to the price, functionality and overall performance. I would highly recommend this unit and also the Seller is extremely responsive and helpful. They are providing me a partial refund due to late shipment.

My husband and I are 83 and 77. It's very difficult to lift heavy items very high. We ordered this to help us move our mid-sized generator from the garage floor to the platform built for it on our RV. It does an amazing job, relieving us of a most difficult task at our age. It was adjustable to the exact height we needed, so we did almost no lifting or weight-bearing ourselves. My husband had even used it as an adjustable table or bench while working on other jobs in the garage or driveway. He can sit at the level he needs to reach what he's working on. It's very sturdy, well-made, and only takes up about 24x24 inches of storage space on the floor. One of our best purchases. We recommend it to our friends.

Worked great, held up under a lot of weight.. Easy to assemble.

Against my better judgement I thought I would give Vevor a second chance. Got this to move a stove in/out of the living room. It arrived as a total discombobulated mess, with the cardboard box all ripped apart, with the reinforcing plastic corners dangling helplessly from the packaging. Despite this, the unit did not appear damaged. Put it together ok, seemed like it would be a pretty good unit until I started to use it. As soon as I placed my 350-lb stove on the table, the hydraulic cylinder started to leak. I didn't notice this at first until there was a huge puddle of oil on the living room floor. So much fluid has leaked out that the lift doesn't work at all now. And of course as I try to return this huge heavy thing I will need to somehow come up with a new reinforced box for it, plus am told that if there are any scratches or indications that it was used that I won't get a refund. Well of course there are scratches - I was trying to use it when I found out that it leaked. I would say don't take a chance. Harbor Freight is probably a better option.

This is a well built hydraulic lift table. I haven't tested the 330 lbs limit, but believe it to be true based not the build quality. I like that it is orange and sticks out in the garage. I won't be backing into it or unexpectedly stumbling over it. The table lift quickly and easily with the foot lever. I find my self something wanting a precise height and needing to go a bit more and backing it down slowly with the handle release. I held back one star because I think the handle should be made to fold down. Nearly all the models I found on Amazon and the internet that had folding handle only raised to <30". I want both 50ish inch height and folding handle.

I bought this to use to install and remove my vintage VW engines. It is 100x better than balancing an engine on a floor jack and handles the weight with ease. The build on this unit is solid and the wheels roll great. There are wheel locks on two of them which hold very well, even on a slight slope. The controls work perfectly, but for my purposes, the lowering is much too abrupt. The ergonomics are great, but trying to fine tune the height, loaded, going down, is very difficult to adjust. Going up, I can pump the lever to easily get the height I want, but if I overshoot and need to adjust back down, it is really quick and jerky if I try to lower just a little. By little, I mean an inch or so. I think most people that buy this will not have any issues with lowering at all because in general, it works perfectly. Overall, I don't regret the purchase at all and will never go back to installing an engine with a floor jack. Even with the minor lowering issue, for my purposes, this unit is worth its weight in gold.

THIS CART IS OF HEAVY DUTY CONSTRUCTION. WELL WORTH THE PURCHASE PRICE. HOWEVER, I HAD TO ASK FOR A PICKUP RETURN, SINCE THE MODEL THAT I MISTAKENLY ORDERED DOES NOT LIFT TO THE HEIGHT THAT I REQUIRED. I AM LEGALLY BLIND AND DID NOT NOTICE THE VARIOUS MODELS BEING OFFERED. IN ONE OF THE VIDEOS, A MAN LIFTED THE CART AS HIGH AS HIS HEAD. I THOUGHT THAT I HAD PURCHASED THAT MODEL. THE HOME PAGE FOR THIS CART COULD BE LAID OUT BETTER AND THE MAN IN THE VIDEO SHOULD NOTE THE MODEL THAT HE IS DEMONSTRATING. OTHERWISE, THIS IS A GREAT PRODUCT AND AMAZON WAS VERY RESPONSIVE TO MY NEEDS.

Arrived in good condition. Easy to assemble with only the foot pump rod, push bar, table pad, and front wheel protectors - assembled in maybe 20 minutes tops. Easy and smooth operation. Only did some lite lifting (~ 70 pounds) and it held the weight well and I was able to raise and lower the weight without any problems. Wish the handle was hinged to allow it to swing out of the way and the pump rod had a quick disconnect to allow for a smaller storage footprint.

I'm past my 70's so there is a lot of stuff I can't lift. This is a great tool. I also use it as a work table.

Buen producto. No lo utizamos con mucho peso, pero esta probado con 150 y va bien. Las ruedas giran bien en todas direcciones

Der Scherenhubtisch ist eine große Hilfe. Schade ist nur, dass der Bügel nicht einklappbar ist. Somit ist er sehr sperrig zu transportieren. Ärgerlich, da ich das Gerät stets beim Kunden zum Aus- und Einbau von Kamin- und Kachelofeneinsätzen benötige und daher stets transportieren muss.

Super bien. Buen precio.

Sa fonctionne parfaitement très bon appareil merci élévateur