YOOPAI 3D Printer Enclosure with Ventilation - Multifunctional Tent Cover to Eliminate Odors, Noise and Dust for Creality, Anycubic, Elegoo Series LCD SLA DLP

If you want to do 3D printing but don't have a garage or dedicated room, this is your answer. Completely contains all nasty smells and fumes and expels them through your window via the extractor hose. Quite simple to build, fits large printers (my Saturn 4 Ultra fits in perfectly) and does exactly what it says on the tin. I have my printer in my bedroom and it's so effective that I can have long prints going on without any fumes or odour escaping at all; if it weren't for the noise I wouldn't even know it was doing anything. The fan isn't too loud either!

This enclosure is a game changer! when I first started 3D printing without an enclosure, the fumes from the resin was filling the house and it became quite dangerous, once i built this enclosure and used it for the first time I couldn’t smell it at all (Apart from when opening it to take out prints) but when you have prints going for long periods of time it can become very intoxicating without the enclosure. The only problem most people have with this is the instructions aren’t great but there’s a video on the product page that makes it easier to follow, my advice is when you’re piecing the frame together, push the poles into the corner pieces until it somewhat clicks to get a straight and even level all around the frame, also check the fan for the airflow arrow to make sure it’s blowing outwards of the enclosure like an exhaust. The quality of the materials is great and it’s lined with an insulating material which will help keep your printer at a stable temperature which means less print fails! The size is good, I’m using a Elegoo Saturn 4 Ultra 16K and it just fits comfortably where I can open and close it without issues and still have some space for the USB drive and some space for the exhaust fan to draw in air. The plastic screen at the front of the enclosure adds another layer of UV protection to your printer which is a great bonus to prevent resin curing inside the vat. I would say it’s worth the price if you don’t have time to DIY an enclosure, definitely recommend, wish I bought the bigger one to put the wash and cure station in too

This fits my Photon M5s great, fairly easy too assemble and I run it with the hose out the window so exhaust the resin fumes. Still wear a mask when I have the printer open to change resin or remove prints but this is great if you have the printer ion the house.

Lightweight, but made with heavy-duty, durable, tear/scratch and water resistant materials (Think anglers' net-bags, rod holdalls etc) and in such a way that whilst not truly airtight, are good enough, with the fan-assisted venting, to contain heavy fumes and allow them to be vented outside via the provided fan and tubing. The 'door' or 'window' flap stops short of the 'ground' meaning that the heavy fumes will sink to the bottom of the enclosure and remain in a 'puddle', behind the strip of material across the bottom of the 'doorway' if the fan is switched off. Whilst the fan isn't powerful, and I haven't done a comparison test, it should do a better job than none at all. Having said that, I will be connecting a far more powerful 6in diameter fan to the tent instead. Meanwhile, the 3 inch ventilation tube, is, I think extremely good, tougher than most and with an internal silver-coloured metallic material lining and I will be using this to connect to my larger fan using a 'reducer connection'. I will either remove the provided fan or leave it switched off and use my larger fan to suck the air out. There is no point switching the provided fan on and trying to enhance the airflow using my large fan as well, because the smaller fan can only shift a smaller volume of air than my large fan and will therefore actually impede the airflow to my large fan. With everything set up properly, with the larger fan, it should be fantastic for containing fumes and removing them to outdoors through a wall vent in my hobby room. The slight criticism I do have of the enclosure itself, for those using a printer around the size of a Saturn2 is that the provided fan and vent area is right beside where the USB port is located on the printer, and, if you have an Elegoo heater one has to pull the printer far enough forwards to allow the power cable around the back of the machine, and for your hand to reach around to switch the heater on or off. And one more issue is that with the 'door/window[ fully open one has to struggle to lift the Saturn's cover up and over the z rails post AND THEN through the top of the 'tent frame' itself. This should be easier with practice, but maybe think about fixing a lifting handle to the top of your machine's cover? If not, perhaps it's a good idea NOT to place your enclosure on a shelf any higher than your waist.

This is a great peice of kit. Comes with a hose, extraction fan and carbon filter. Never used the filter as the fan extracts the smell. The hose extends pretty well... about 4 feet in length. All fits together nicely and has covered gaps for electric leads.

Excellent value, the material is robust, full enclosed the print keeping in fumes and spills. Assembly was quick and easy took less than 10 minutes. And plenty of space, fits a Elegoo Saturn 4U with space to access the USB port, and space to lift the lid without needing to fully unzip the flap. Decent length of ventilation hose and fans works well. Has made a huge difference as I no longer get any fumes at all when zipped up and fan running. This is a must have for those who don’t have space for a fume cabinet.

Zip is a bit bad but usable. All else is great

The enclosure was fairly easy to assemble, just make a note of the three axis in the instructions. It fits my Saturn 2 with loads of space left to include a small heater, I find in my very cold conservatory it helps maintain a more consistent temperature. I also run it without my printer's UV lid and have had no issues leaving resin within the enclosure for several days. Watch out for the metal core in the exhaust pipe when trying to twist it onto the mount. Overall very satisfied with functionality and build quality.

Good fitment of enclosure to the frame, instructions a little sparse but only one way to go together really, fits a Creality K1 Max nicely with room to spare for filament dryer. Very nice price and exellent tracking updates, very happy with purchase.

Excelente carcasa. Cumple su funcion mantenimiento del calor y evita olores y esparciamiento de particulas volatiles toxicas.

Rien à dire, le montage est un peu moins facile que décrit mais reste simple. L'évacuation reste suffisante à condition bien entendu d'avoir une sortie vers l'extérieur. Il y a bien un petit filtre en charbon fourni mais il reste insuffisant pour éliminer les odeurs. Il faut vraiment une évacuation . Le petit ventilateur pourrait être aidé par un extracteur fixé sur la sortie.

The instruction take some time to figure out (rods are numbered 1-3 but the instructions label them as XYZ). When it all comes together it looks great. Would only need to open the zipper all the way to access the wash/cure station. I haven't printed anything, yet. When I do I will update the enclosure's ability to not make my house smell like resin.

Do drukarki A1 Mini jest akurat jak dodrukujemy top holder, głośny wentylator aaale coś kosztem czegoś.