Tyger Auto Fender Flare Compatible with 2007-2013 Chevy Silverado 1500 2500 3500HD (Not Fit 07 Classic) 6.5' & 8' Bed, Fine-Textured Black Paintable Factory Style 4pc | TG-FF6C4288

Have the same classic rust problem others have mentioned. Do not let a body shop convince you that they can somehow "fix" it with sanding and filling. The metal is compromised. You can do a massive cutout around it and weld in new steel. Or replace the bed. Got quotes for both. It will cost thousands. This is a much simpler option. Had a local shop paint them to match (300 bucks) and a buddy help me install them. First, we ground out the rust as best as possible (he really did most of the work) and painted with a penetrating rust stopper to at least slow it down - there is really no easy way to stop it at this point. Quality seems very good. I like how the mount points are stepped inwards so there is space between the flare and the metal to allow it to breath. The hardware that came with it seemed to be of decent quality. I was not crazy about the rubber edger that was included so I order something separately that seemed better quality: https://www.amazon.com/dp/B0DKNWV7BK Installation went fine. In theory, no drilling should be necessary but have one ready since things will probably not line up perfectly. The fronts are meant to use existing screws and mount points. Most lined up but we did have to slot the holes in the flare at the very front since they were just too far off. Easy enough with the soft plastic. The backs mount in an interesting way. The side holes (4 each) use an kind of s-bracket so you do not have to drill into the steel. The top holes (2 each) use existing holes in the fender however they may have rusted out depending on how far gone it is. Overall, well worth the effort. You do not have to have them painted but I think it dresses up the truck nicely. If and when the rust reaches above them (which will be a while), I guess I will have to upgrade to dualies! :)

The rears fit good. But I needed to elongate the holes to make the front flares bolt on. Its not to big of a deal for me to have to modify the bolt holes a little (about 1/4 to 1/2 an inch on each bolt) so im not knocking any stars off for that. For the price compared to others its a great deal. The material seems like it would hold up a long time almost feels like the simi playable Rubbermaid totes. It came with all needed mounting hardware. If you are covering up rusted rear finder wells these flares will work just dont put on the rubber guard stripping instead apply 1/8 inch thick 3m double sided tape (sold separately) along the entire top edge where you would have put the guard strip and use the s brackets where you can to mount them.

Overall, the form fit to the body went well and looks great once done. I did have to tap holes and make some adjustments. Reason for the 4 stars is due to there isn’t a great hole alignment at all. The hardware it came with is ok, I’d recommend something a little more sturdy if you can reuse the bolts from the truck or have extra lying around. Happy with how it came out and looks covering the rust. So does what I wanted it too.

They fit perfect and arrived when they were were supposed to

Easy to install and looks great

fast shipping easy install looks great took about an hour to install would buy again

Very pleased the the Tyger fender flares. Easy install and perfect fit on my 2013 Chevy Silverado 2500 HD. Flares had a good seal around the edge. They look great.

The directions for instillation were terrible. No mention at all about the rubber edging and what i believe is a tool to install it. Where its installedni don't know. Although it says its gor my chevy silverado 1500 2013 with a 6.5' bed the holes for front flares fo not align with holes it truck by about an 1/2 inch. I put the back on first so i'm not taking them off. I'm not going to be able to use the front flares at all because they can not be modifyed due to the moulded flat thats supposed to line up with holes in truck. The other reviews are not bad so did i just get bad parts? Hard telling not knowing. I would reccomend not buying these.

This was not only easy to install but had everything included. Great quality and fit perfectly on my 2009 Chevrolet Silverado 1500

النتج والمقاسات مضوبطة على السيارة

These are a perfect fit, as good as OEM. No guess work or measuring involved. All the necessary hardware is supplied.

They fit well, easy to install and the cost was really good. So so far so good. I'll have to wait and see how long they last now. Like some other people that left a review here, I didn't bother trying to use the supplied instalation clips, since I had to much rust on the fenders, I went strait to using self taping tek screws, they worked great.

Covers rust on front and back above tires. Sleek and looks great. Makes truck look awesome