UGREEN Hard Drive Enclosure, SATA to USB 3.0 Caddy for 2.5/3.5 Inch HDD SSD

Been using this for my external drive from my PC to connect it to my Mac. Installing my hard drive inside it was very easy as it also comes with instructions in case you need them. I replaced the cable it came with as I needed one that connected to USB C whilst this was a standard USB 3.0, so I won't say this is a negative as this was purely for my needs. The enclosure is made from plastic, but that's to be expected as there's no need to use high quality materials for the enclosure as the price would go up more. What matters is that it works for what it is intended for. When not in use, you can safely eject the hard drive on your PC/Mac and then turn it off on the enclosure to prevent it from starting up when not needed. Also, this being from UGREEN, I knew I could trust it as I've bought many things from them as they've always been reliable.

Brilliant bit of kit! So easy to set up, anyone could use it. I can use my old internal HDDs as external drives now!

It seems good (time will tell) but could so easily have been much better. This drive carrier may be ‘Plug and Play’ but any new drive you install into it probably won’t be. So, if you have plugged a brand new drive into the carrier and connected it to a Windows PC don’t assume that the new drive will either be visible in Explorer, that Windows will automatically take you through the necessary set-up process or that there is any help in the instructions with this carrier or with the new drive. Windows Disk Management contains the necessary tools to make a new drive usable within the system: right click ‘START’ then select it and carefully identify your new disk (if necessary by comparing the drives listed when it is ’off’ with those listed when it is ‘on’). Do not meddle with existing drives. Click on the unassigned volume and use the ‘new partition’ Wizard to take you through the straightforward steps of assigning it an unused letter of identification etc. etc. I suspect that the ‘auto sleep’ feature could prove to be a problem if/when I place an HDD in this case and was surprised to find that this isn’t simply switch adjustable on the device or via its ‘properties’ in Windows. Sleep is possibly imposed due to the poor ventilation, which others have mentioned, as the only vents are in the base, with none providing vertical flow. I will slide the case open if this proves to be an issue and may even drill small diameter upper vents if necessary in the rear panel. I have experienced no difficulty sliding the case open - pressing down gently near the centre front seems to release it perfectly. Mechanically, there is nothing to stop a drive coming away from the SATA connector. So, although it is quite tight and probably OK for a 2.5 SSD, I cut a suitable piece of plastic to bridge the gap behind the drive and eliminate the risk of it disconnecting. My next step is cloning my PC's boot drive to the SSD and, if successful, swapping them over and using the case for the HDD.

I really like this device.I was able to retrieve over 800GB of data from a hard disk from a PC that packed up.The speeds were excellent and it's really easy to set up.

Bought to house Seagate 3.5" 3TB HDD originally from a failed LaCie external drive used as a Mac Time Machine backup solution. Comes with USB3.0A style connector, so USB A to USB C adapter was required for my Mac Pro. Very easy to setup, up and running within 5 minutes. Worked exactly as expected. Relatively quiet in operation. Housing is largely plastic, so not especially robust/durable (manual says not to drop it!), but more than adequate for desktop backup. Power cable is about 1.5m long, and USB cable is about 1m long. Not used for long periods, so not sure how it would stand up to that. Consider it value for money.

A very rugged bit of gear. I actually have just bought another one as it was on sale. I bought a load of server enterprise drives for cheap a while back and used it often to transfer data from those and other different drives. This enclosure is excellent and will NOT skip a beat. It is the Anker of Enclosures, a decent well made product. Little did I know a single one of these drives is now worth more than what I paid for for the set! I felt to put these as backup drives and one a hot external. I have a file server and ran out of drive connectors as it is a cheapo Celeron board. Not wanting to upgrade the motherboard just yet for a file server I popped one of these to the USB-3 port with one of these drives. It has been in use constantly and has had zero issues and does not skip a beat. I would trust this over a cheaper one and I have had corruption from cheaper units where a USB drive failed, I plugged in the backup drive to find that was corrupted by the cheaper enclosure requiring that I use the filesystem journal to recover (ExFAT would have been screwed in this case, meaning going to the offsite backup). The enclosure does NOT bottleneck allowing full USB 3 speeds. I get better write speeds with this and enterprise HDDs over QLC SSDs with a full cache, which happens often during my workloads, to the point I went back to enterprise HDDs. It has been in use in a rugged high workload environment and has not skipped a beat. The only bad bit: When using enterprise drives during very long writes, these drives get HOT, to the point they can be uncomfortable to hold naked when run in this unit which has no airflow. I have not observed this with consumer drives. So the one in the file server I leave the cover off to allow better airflow. If you want to use this with an enterprise drive, I would drill a few air holes for breathing. I think UGreen should add a tiny little fan for if you wish to use enterprise drives, but my usecase can sometimes result in 3+ TB of writes in a single session, so its a heavy usecase. All in all, a wonderful product that is both suited to consumer and prosumer use, though some caveats with the latter.

Very simple to install the drive into the caddy was then plug and play to get the laptop to read the drive. The drive was one which had resided in an old desktop. I had taken it and stored it having first back it up on an external drive. So glad I kept it as that drive malfunctioned and without this caddy and the saved drive I would have lost everything. Needed to look up how to change the user permissions, but that was easy enough. Now backed up again and this caddy is in a safe place just in case! Really saved a Lifetime worth of work and memories

Works as it should, easy to set up

Very good

سرعات عالية حسب جودة وصحة الهارد ( جميع الانواع ) شكرا للبائع واتمنى المزيد قريبًا ✌🏻

Looks okay. Tried them, working well. Thanks for the fast delivery too.

This was a completely painless process - the enclosure is really sturdy and clean looking. I’m using this for a home file server with a 8tb HDD inside and I’ve had absolutely 0 issues with it ! Great price , great product 100% recommend !

Bought this to replace 9 year old enclosure. The product came in a nice quality packing with an usb 3.0 cable and power supply. The product is designed well and simple to install. It holds the HDD in place with rubber foam support, no screws for installation. The finishing is good and feels like an expensive enclosure. Looks nice on my desk. It's made of quality plastic. I am very satisfied with this enclosure.