SimPure T1-400ALK Tankless Alkaline Reverse Osmosis Water Filter 400 GPD

I’ve now been using this product daily for 2 years and using water testing devices to verify quality. This product is very good, works well, and produces pure, clean, great tasting water.

Je l’es depuis plusieurs mois et satisfait j’ai installer des lecteurs de ppm entre tout les filtres et je soupçonne seulement le premier de faire une moin bon travaille a moin que mes lecteurs manque de précision je vais revenir plus tard ici a

I’ve had this system for about two and a half years now, so I figured it was finally time to leave a review. It’s worked really well the entire time, and most importantly, the water tastes great. One of the reasons I chose this model is the alkaline (remineralization) filter, which adds minerals back into the water after the reverse osmosis process. Just keep in mind that because of this, you should not expect a zero TDS reading. That’s actually the point. I personally didn’t want zero-TDS water and prefer having the minerals added back in. I also really like the tankless design. My previous RO system had a storage tank, and I much prefer having the water filtered on demand rather than sitting in a tank. This system does have a pump, so it needs to be plugged in, but that wasn’t a big deal at all with my setup. One tip after changing the filters a few times: I’ve found it much easier to take the whole unit off the wall, lay it on its side, and change the filters that way rather than trying to unscrew and replace them while it’s mounted. Overall, we’ve been really happy with it. Great-tasting water, reliable performance, and after over two years it’s still going strong. Highly recommended.

I am definitely not used to the taste of the water and water measurements are harder to do with this system as it is adding minerals back into the water. (Tempted to order that post carbon filter as I hear others have contemplated this to get closer to a 0 PPM reading). Also, one BIG issue I found with this system was that the spout was NOT deep enough a length for my countertop... luckily I was replacing an older system so I used that spout. It should come with an extension at least. Other notes... it's not noisy per say but pump does make noise. Filters and hardware are straightforward enough for most DIY'rs. Pressure gauge display is a nice touch.

After one week of use, I’d like to share my experience and explain why I chose this particular reverse osmosis system over others. There were two main reasons for my decision: 1. Filter flexibility (ALK to T33 option). This model allows you to replace the Alkaline (ALK) filter with a T33 carbon filter if needed. I wasn’t completely sure whether I would prefer alkaline water long term. With this system, I can simply swap one filter and get 0 ppm water if I choose. That flexibility was very important to me. 2. NSF certification. This system has internationally recognized NSF certification, which can be easily verified on the official NSF website. Unlike some brands that only pay for one-time testing, this certification provides ongoing credibility. For me, that really matters when it comes to water quality and safety. Packaging & Installation: Everything arrived well packaged and protected. The box includes many additional fittings for different installation scenarios — various tubing sizes and even the option to connect the system to a refrigerator. The instructions are clear and detailed. Installation took about 1.5 hours. The most difficult part was drilling a hole in the countertop for the faucet. I had to buy a diamond drill bit for that. My advice: buy a good-quality bit and watch a YouTube tutorial before drilling. I was surprised to learn that: 1. You need to keep the drill bit wet while drilling. 2. You should start drilling at a 45-degree angle. The unit itself is compact and doesn’t take much space under the sink. Water Quality Results Before installation, my tap water measured 176 ppm. After installation, it measured 70 ppm, because the ALK filter adds beneficial minerals back into the water. After one week, I performed a 14-parameter water test with the following results: Hardness: 50 Chlorine: 0 Iron: 0 Copper: 0 Nitrate: 0 Nitrite: 0 Calcium: 0 Total Chlorine: 0 Fluoride: 0 Alkalinity: 40 Carbonate: 180 pH: 7.5 Lead: 0 Bacteria: 0 Overall, the results are very reassuring. What I Would Improve I would like to see better filter replacement indicators. The current system for tracking filter life is not very informative. A clearer indicator or built-in reminder would improve the user experience. Overall Impression I am satisfied with this purchase. We drink this water daily, cook with it, and wash food with it. So far, the system performs as expected and gives me confidence in our water quality.