Spigen Lock Fit M [EZ FIT] Locking Device Compatible with AirPods Pro 2nd Generation/AirPods Pro Case with Lanyard [Installation Kit Included] Charging Case Not Included - Gray

Looks so slim and good, white color totally blends with case, strong magnet, despite good quality only prevent the AirPods from getting off the case if case drops.

By the way works great with AirPods Pro 3. The light hole is slightly misaligned, but you still see the light OK, even better - not that bright at night. You just have to align the clasp manually without using the included template. Also make sure to pull the protective film from the middle of each part - if you pull it from the corner adhesive film might come off. Great value at a discounted price!

After having this on my pros a year, when i had to get some new ones, the new case felt weird without this on it, so ordered a second and installed it. It's one of those rare third party things that makes a pretty strong case (!) that it should have been a feature out of the box. I find it easier to handle the little white slippery pebble, plus no risk of a pod dropping out

Great at protecting from small drops, but on larger drops to hard surfaces, my AirPods Case still flew open and launched the AirPods across the floor. Additionally, after ~7 months of use, the "hinge" on the bottom piece broke. Fortunately, I was able to contact Spigen support and they were extremely prompt and helpful in sending me a replacement. It did leave some residue on my case, though. Overall, I'd recommend these AirPod locks. They're fairly useful, and valuable for their price. Additionally, they're able to distinguish your AirPods from others, if you have friends who also have AirPods and often get them mixed up.

Novel idea. The adhesive and easy precision install is great. Doesn’t matter because the clasp is the weakest link. Perfectly installed with ease thanks to the install kit. Adhesive rock solid. But, the clasp setup is nothing short of POS. Makes it totally redundant. It’s easier to pull it open as normal, rather the push the button to open the clasp. Dropped it on accident while doing so, case opened and AirPods scattered. I wanted to keep the case slim and protect the pods. Which made this a great idea. But no bueno. I’d be upset if I paid full price and couldn’t return it. I’ll second guess the rest of Spigens product line accordingly, especially based on the original price of this product. High price for a cheap product. Expensive price = quality scheme. No dice Spigen.

It took a bit of patience to get the lock module to stick securely to the surface of the case due its texture. The key is to clamp down the lock module and let it sit for a while to mend or just apply a strong adhesive of your choice, But once I made it work, I can honestly say that the aesthetic is quite satisfying. There is absolutely NO WAY your case is opening if you happen to drop it. The combined efforts of the lock module and the magnetized opening of the case Guarantees your AirPods are 100% secure in the event of ANY possible fall. To be honest, it’s almost too much security at first, but once you work the lock a couple of times it becomes a lot more manageable. If you choose to run the lock module case-less , it should still be enough to get the job done.

The pull tab that covers the backing adhesive between the clip (the actually Spigen item) and the airpods case pulled off and separated when I tried to pull it back. I've done lots of these types of installs for various electronics, and I guess the adhesive is super strong, because the actual pull tab tore off. However, because it tore off, I had to take tweezers and pull off the remaining plastic cover flap, which might've decreased the effectiveness of the remaining adhesive. However, the alignment frame was useful, and once I actually got the adhesive to stick, it seems well stuck. it will wiggle just slightly, so don't put too much pressure for several hours until the adhesive sets (just like with any other adhesive surface) 2 stars, because actual latch is hard to push, before it will actually separate. I can't open the case with just one hand now. I have to use 1 thumb to push the latch, then the other hand to flip open the top. I feel like they could've removed the lanyard to save cost, and added more engineering or value to the clip part. a week in, and the clip is still pretty securely stuck, but it moves *ever* so slightly when I push kinda hard. I'll update if needed.

Great accessory for a missing feature to the AirPods case. I have no idea why Apple does not have a latch as it is very easy for the AirPods case to open and the AirPods to fall out. This simple to use latch solves that problem. This is the second one I have used and have been happy with both.

Super produit !!! Hyper simple a installer et ne gâche en rien le boîtier de mes AirPods Pro 2. Le voyant est bien visible. Plus aucun risque de perdre les AirPods si le boîtier tombe . Mérite les 5 étoiles ⭐️

Jag ville inte ha något klumpigt fodral utan bara ett lås för att min hund skulle låta bli att tugga på airpodsen. Till det syftet är detta ”lås” perfekt. Man tänker knappt på det och hunden har inte en chans. Med det medföljande monteringstillbehöret garanteras man en snygg och korrekt montering. Det följer även med en liten ”bärsele”. Allt är av hög kvalitet, ingen Wish-skit som går sönder direkt.

Booth this a while ago for my AirPods Pro 2 and it has definitely helped to keep them in the case whenever I have accidentally dropped them. The design is very minimal, doesn’t add much bulk to the case or anything and works great and it’s very easy to stick on to the AirPods (takes less than a minute to do). Overall, can’t fault this product and would recommend it to anyone with AirPods to get this.

Ich muss ehrlich gesagt gestehen, dass ich eigentlich eine Hülle mit zusätzlicher Verriegelung erwartet hatte, da ich das einfach nicht richtig gelesen habe, aber dem ist nicht so. Die Idee von Spigen ist aber eigentlich richtig gut. Nicht jeder nutzt aus Platz oder Designgründen eine zustäzliche Hülle für das Airpods Pro Case. Eigentlich ist es ja auch nicht nötig, da das Case schon einiges ab kann und im normalen Alltag sollte es kleinere Stürze auch ganz gut überleben. Allerdings fliegt ja gerne mal der Deckel sehr schnell auf und schwupps fliegen die Hörer durch die Gegend und genau hier setzt Spigen mit der recht einfachen, aber genialen Idee an. Man klebt einfach eine Verriegelung mit hilfe eines Installationsrahmens für Passgenauigkeit vorne auf das Case und so bleibt dann es dann bei einem Sturz immerhin verschlossen. Ob man das jetzt braucht oder nicht oder vielleicht doch lieber direkt eine Zusatzhülle mit Verriegelung nimmt sollte jeder für sich selbst entscheiden. Preislich finde ich es aber etwas zu hoch angesetzt. Ansonsten ist es eine tolle Idee und füllt eine Lücke auf dem Markt. Hut ab Spigen.

Bi işe yaradığı yok