SKS Germany Raceblade Pro & Raceblade Long Mudguard Set, Bicycle Accessories for Road Bike (Bike Protection with Quick-Release Attachment, Length-Adjustable Struts, Lightweight and Extra Long Spoiler)

Really good product, they are made in Germany so of course they are! Easy to fit and adjust. Work great on my Road bike

Having suffered for a long time during wet weather, decided to invest in a set of mudguards for my road bike. Arrived in good time, first impression when unpacked was that they look sturdy and good quality. Stood bike on bike stand to fit, once adjusted to roughly the correct size, easy to secure to the forks. Adjustment took little time before they were in correct position to lock. Care with front mudguard, ensure it's back sufficiently to avoid coming in contact with your feet when turning sharply. Been out a few time now, they do the job well and on rough roads you don't know they are fitted. Would recommend to anyone looking for good quality mudguard for road bike PS: will probably remove during the summer months, which will be an easy job.

The mud guards are designed to be quick fit I bought them because of the quick fit feature and they would hopefully allow a 25mm tyre to be used. I curently use 23mm tyres. The stayas of the front guard needs to be shortened as even if you adjust it to the maximum from the screws they are still too long. Soo I would need an angle grinder to shorten the stays and that is the main disadvantage The quality otherwise seems to be good, but not shure how long the elastic rubber used to fit them to the frame would last. They look ok on the bike but some People dont like the look of a bike with mudguards on. But that is the sacrifice if you don't want to be splashed. It would be nice of the back mud guard was longer because ot only goes up to the breaks. I would benefit if it was going past the breaks and down the wheel for a better protection. I recomend it for people who want some quick fit, quick release and have an angle grinder and can cut the stays to shorten them a bit.

5 stars for fit, 5 stars for quality, 5 stars for ease of fit. However, they ruin the lines of my otherwise beautiful track bike. I use my track bike to commute in all weathers and can put up with wet feet and a black line up my back but was getting fed up with grit in the drive train. Fitted these puppies and was amazed that my feet were almost dry after a 45km commute, just after the rain. I love these things (but hate the looks, did I mention that?). As mudguards go, they're no worse looking than any other mudguards, I just don't like the look of any mudguards. Would I recommend? Without hesitation. Do they disconnect in 3 seconds so they don't get stolen? Yes. Do they fit again within 10 seconds once initially set up? Yup. Am I going to buy another, larger pair for my gravel bike? Hmmmmm. Tempted....

Easy to attach and easily removed too. Plenty of adjustment to get in the right position.

It's German, right. The packaging is good. The product is obviously good when you first look at it. It comes with thoughtful additions, like the clear adhesive strips that protect your frame against rubbing and wear. The build is good and looks good. And, Lo! They work. No rattles etc. Every time you get a great product at a reasonable price, that doesn't come from China - it's a win.

These are nice units but you will need 35mm or more between tyre and down tube. I've not got that so I've fitted the rear and will have to workout a solution for the front wheel

I commute 24 miles/day on a fairly high spec carbon road bike. It's a joy in the summer but not so much of a joy in the autumn/winter. These mudguards are a game changer and without them I would probably have switched to the bus weeks ago. While not cheap, they were the same price as a weekly bus pass and have already paid for themselves many times over. A little fiddly to fit, but not overly so, they don't completely ruin the lines of my bike, don't rattle or shake and do an excellent job of keeping surface water and road debris off me and my drive system. Recommended.

Auf der Suche nach schnell zu montierenden Schutzblechen für mein Pendlerrad (Cyclocross) habe ich mich nach recht umfangreicher Recherche in diversen Radforen schließlich für dieses Produkt entschieden. Nach mehrwöchiger Benutzung sowie einigen An- und Abmontagen möchte ich die Schutzbleche an dieser Stelle kurz rezensieren. Die knapp 400 g schweren Kunststoff-Schutzbleche passen laut Hersteller für Reifenbreiten von 25-32 mm, sind also vornehmlich für Renn- und Crossräder geeignet. Das Quick-Release-Befestigungssystem ist über zweigelenkig gelagerte und in der Länge verstellbare Metallstreben mit dem eigentlichen Blech verbunden. Die Montage erfolgt an den Hinterradstreben bzw. Gabelbeinen (Vorderrad) mit Hilfe elastischer Gummibandagen. Als Schutz gegen Lackschäden liegen den Blechen Lackschutzfolien bei; allerdings sind die Auflagepunkte mit relativ weichem Kunststoff versehen, so dass die Folie im Grunde obsolet ist. Die Einstellung/ Justage der Bleche erfolgt einserseits über eine Änderung der Strebenlänge (dadurch Regulierung des Abstandes zwischen Schutzblech und Rad) sowie über die zweigelenkige Verbindung (zur Anpassung an die Rahmengeometrie). Sowohl Strebenlängen als auch die Gelenkverbindung lassen sich durch Inbusschrauben fixieren. Während die Erstmontage und Einstellung noch ein wenig "Fummelarbeit" bedeutete, lassen sich die Schutzbleche nach einigen wenigen An- und Abmontagen mittlerweile in Sekundenschnelle anbringen. Der Sitz der Bleche ist bei entsprechender Einstellung, sowie nach korrekter Arretierung der Inbusschrauben und ausreichend festgezurrten Gummibandagen hervorragend. Lediglich bei holprigen Wald- und Schotterwegen in Verbindung mit hohen Geschwindigkeiten konnte ich bislang ein leichtes Verrutschen der Schutzbleche feststellen. Nützlich sind insbesondere die relativ langen Spritzlappen am Hinterradblech (vor allem bei Gruppenausfahrten dankt es einem der Hintermann), während die Spritzlappen am Vorderradblech mitunter die Füße streifen können, je nachdem, wie weit vorne der Fuß auf der Pedale steht. Fazit: ¯¯¯¯ Die einfache, schnelle und durchdachte Montage sowie die vielfältigen Einstellmöglichkeiten machen diese Renn- bzw. Crossradschutzbleche zu einem idealen Begleiter bei Regen und Matsch. Hier wird effektiver Spitzschutz zu einem fairen Preis-/ Leistungsverhältnis angeboten. Uneingeschränkt empfehlenswert.

I didn't have to fiddle around too much installing it on my Cervelo with a 700c x 25. Although I haven't gone out yet, the spacing between the tires and the fenders is a very good fit. The mounting straps was just enough on the front fork and required a little adjustments. Looks great! Can't wait to take it out on wet day for a ride.

Update 8/2021: I’ve gotten a lot of use out of these and they are truly great. They go on and come off easy so I can just toss em on when it’s wet out and.. you get it. I have yet to actually use these, but I can tell they will be great. The installation and adjustments are far superior to the planet bike fenders in a similar price range. I owned the planet bike ones for many years and put a lot of miles on em - BUT the adjustments were garbagio. SKS feel more stable and as mentioned, are far easier to adjust. Will update once I use in the field.

veloce e rapida installazione, basta avere un pò di buona manualità. ottimi per non infradiciarsi. montati su bike stradale, non so su mountain bike. COMUNQTE CONSIGLIATI!!

tres bien, ca depanne bien