(2 Pack) Designed for ZTE (Axon 7) Tempered Glass Screen Protector, (Full Screen Coverage) Anti Scratch, Bubble Free (Black)

Having installed glass protectors on iPads, a Surface Pro and various phones I’ve learned that the installation processes can be very frustrating….mainly alignment and dust. I went through all the iterations to set-up the perfect install environment, you know, washed my hands, cleaned the counter, stopped breathing, etc, etc. And other than reading the instructions and watching the videos I make it a point to read people’s reviews for “tips and tricks”…there are some really clever people out there and I’ve found that learning from their trials and errors saves me lots of frustration.I, like many Axon 7 owners have the Spigen rugged case. As is the norm it was the reviewer’s “tips and tricks” on Amazon that simplified (as in “no-brainer”) the installation process…the install was flawless! Other than the mandatory screen cleaning and dust control processes I highly recommend these three tips from other reviewers (my thanks to them). 1. Plug in your Axon so that the red charging light is on. 2. Install the screen protector with the Spigen case on your phone, and 3. Install the screen protector from the top of your phone down to the bottom. The red charging light allows you to perfectly align the protector’s light opening with the screen light and leaving the case on allows the screen to fall perfectly between the edges. It took me only one attempt and the screen fit perfectly!! No air bubbles, no rainbow effects and no dust!! Thanks again to the other reviewers for their tips.The Supershieldz screen protector is a high-quality product. It looks great, fits perfectly, the install process was a breeze and the packaging is a very nice plastic case that prevents any damage during shipping. My only problem now is that I have an extra screen protector that I may never need, ha!!

Very decent screen protector. Application was very easy - guidelines at the bottom buttons - minor annoyance that at an angle it hides the location. But ZTE was stupid for not making them lit, so at least it's not distracting of a problem. By now we've learned to handle the buttons by feel alone. I like the concept of the black borders - it's an ingenious design concept to compensate for the curved screen. With the default ZTE case, fits perfectly fine with no visible edging. (Well... TBH, it's legit like a sheet or two's worth of printer paper of an edge for all you nit pickers....)Minor touch issues at the edge - will need to see how I adapt to see if its a me or it problem. Every now and then there is a rainbow halo - not sure why or when it happens - only happened twice. very odd. I was charging the one time it was an issue. I would suggest this for anyone leery of screen protectors. The Axon 7 has been awful for them - but this is the best I've found.

I want to say it's a 4.5 out of 5 but we don't have that option. All in all it's a solid 5 stars. The only "flaws" would be that YES, as some other reviewers mentioned, there's a rainbow effect in the center of the screen. This occurs after you leave the phone in your pocket against your leg and the two screens kind of mesh together and leave a little rainbow-ish circle in the center of the screen.Try looking for it with the screen on though and you will not find it. At least, my eyes can't and there's absolutely nothing medically wrong with my eyesight. Screen off and black? Sure. Get over it!Fit is perfect. Only flaw here is to try and do your very best to align it or you'll get a tiny insignificant sliver of the screen cut out on a side or two. Do it in a calm area, don't move much, and hold your breath (all to prevent dust kick up / float, of course). Keep the screen facing down when applying so nothing settles on it after you take the initial protective layer off before applying the glass to the phone itself.I recommend applying from the bottom up aligning the center and "back" And "Apps" buttons up as closely as possible while paying attention to how it's aligning on the sides as you let the top rest into place.Lastly, it must be pretty tough because I took it off about 3 or 4 times (because I'm a perfectionist about these sort of things) to realign it and it didn't crack or break under some flexing (keep it to a minimal!). And! I still have the other one left out of the two pack!All in all, best glass screen protector you will find for this phone!Had two previous Poetic protectors. Great protectors and probably the best for safety and abuse protection but the plastic screens scratched easily and really effected clarity. This protector covers 99% of the screen and brings back that clarity without any noticeable compromise (check the picture. The 1% does't matter, trust me). Highly recommend!

I was hesitant about the black outlines on the screen, but they actually match up perfectly with the phone as designed and I don't notice that it's part of the cover. I'm not having any sensitivity problems and it covers the whole screen edge to edge. Perfect for this phone, especially since there are so few options out there!Honestly, this had the easiest installation of any screen cover I've used for any device. If you're having trouble with it, try these tips:- Install in a steamy bathroom after you shower. The steam prevents dust and hairs from flying around so easily and getting to your screen. Just make sure your phone screen is DRY and does not have condensation all over it when installing.- DO NOT USE the alcohol cloth that comes with the cover!! I think this is the cause of the "rainbow spot" other reviews mention. It doesn't dry properly and the moisture will get trapped under the screen.- Clean your screen instead with the same stuff you would clean eyeglasses. A microfiber cloth and some spray if you have it. Just don't use the alcohol cloth.- Line up the home button end first and then lower the whole screen down slowly. Try your best not to touch the sticky side.

I put off buying a screen protector for this phone because I was concerned about fit and the fact that the centre doesn't have any adhesive action to the screen; I was worried that there might be weirdness with a gap or bubbles or something. It turns out my concerns were unfounded. This thing fits like a glove. Like, it's uncannily perfect.I had some concerns about getting it aligned properly, but it wasn't too crazy. It's important to get the bottom aligned properly because there is a little clear circle that needs to align to the one on the phone. It wasn't too hard, but maybe I just got lucky. Either way, if you buy this screen protector, just be sure get the bottom properly aligned.The oleophobic characteristic isn't as strong as the coating I've had on other screen protectors - finger prints do stay a bit more that I would like, but it's easy to clean it off by buffing it on a cotton (like my shirt), or with an alcohol wipe. And keep your fingers clean, LOL!The glare is exactly the same as the original glass, as far as I can tell. So I didn't take off any marks for that.The edges are amazing. They line up in just the right spot along the edge, and they're gently chamfered (beveled) which makes it almost unnoticeable. If you have a case (like the popular one from Spigen), then you won't notice the edge at all; it will seem seamless.One notable thing, the glass is remarkably smooth. Smoother than the original glass. So my finger slides across with much less friction, especially when my fingers are clean and dry. This is mostly a good thing, but is a little weird when playing games that require my fingers to be stable on the screen for any length of time. I've become accustomed to it, but it's really neat just how smooth the glass is.All in all, it's hard to knock any marks off this thing at all. I've had it on there for a month or more, and I am 100% happy with it. This is a *strongly* recommended product for you ZTE Axon 7 or Axon 7 Special Edition.

The glass screen protector covers the entire screen plus the any black portion around it, including the navigation buttons. I have lost sensitivity in those buttons, eapically the home button.I purchased a Spigen case to go along with it screen protector but it would not fit since the protector goes edge to edge. I needed to use the case included with the phone.The screen protector sticks very well to the phone, even though it runs a little against the case.It does however constantly show finger prints and needs be be constantly wiped down.It retains the same clarity of the phone screen underneath as well.Overall, good choice

This protector warranted the $30 price tag almost immediately. Installation took less than 5 minutes with and everything for the process was included in the box. After watching the linked video (watch it) getting the screen on flawlessly took less than 5 minutes and required no prior skill thanks to the included hinge system. Once on i can say it is the only screen protector i have ever used that fits the 2.5D screen without peeling edges, improper screen coverage or clunky looks.100% recommended for anyone wanting to protect their phone and anyone that is tired of the poor cheaper alternatives available elsewhere that never quite fit right.

Perfect fit. Keeps my phone looking new and feeling slick. I have bought this item many times, and my ZTE phone is 3 years old and I've been taking it into a steel plant every day. Still feels brand new every time I put a new one of these screen protectors on. And it is very scratch-resistant. This item and a Spigen case is all you need for your phone.

These are hands down the best screen protectors I've ever used. They go on very easily and are very durable.