HARDELL Angle Grinder Dust Shroud 4.5/5 Inch, Angle Grinder Attachments, for Universal Angle Grinders(125MM)

Good, and work Excellent

I must say it has earned its place in my toolkit with a solid 5 rating. First and foremost, my wife gave her stamp of approval on how well this item worked. She was concerned using a grinder in the house to remove tile mortar and this dust shroud did not disappoint in that regard. Setup was easy. I encountered no issues fitting it onto my grinder. Connections supplied also seamlessly connected to my shop vacuum. However, I did notice that I had to pay some attention to ensure that the vacuum hose stayed securely connected while using. One minor hiccup I encountered was the need to add some pressure to the top of the grinder during use to press down the ‘broom’ bristles to make floor contact. It took a bit of trial and error to find the exact pressure required, but once dialed in, the performance was exceptional. The dust shroud effectively contained ALL dust generated. I did have on a respirator, but I probably could have done without it. It gets the job done; I’m really impressed after reading quite a few negative reviews on like products.

Bought this to use with my Makita GA7021 7" Angle Grinder because the Makita equivalent was out of stock (and twice as expensive). It works, but takes some fiddling to get it to fit square and tight to the motor. The particular ring that was the right size interferes with the four bolts on the face of the grinder, so it needs a little gentle persuasion (the reason for four stars). Once in place, however, it stayed there. I used it when grinding concrete to help flatten my basement floor. When attached to a shop vac, it captures way more dust than without it, but plenty still escapes, so you still need to tarp everything and wear a dust mask. A final pro tip: don't wet the floor when grinding to keep the dust down. Your grinder and shop vac will hate you, and your dust shroud will fill up with mud. Lesson learned the hard way.

I have a 4” concrete grinding wheel on my cheap Menards grinder. That’s apparently a bad combo. What’s strange is that the clamp for the grinder attachment doesn’t seem to be designed for the diameter of the adapters. When clamped to the proper tightness to keep it in place, the entire dust shield is shifted off to one side. This would absolutely cause the plastic melting that some have experienced. I did not have a larger wheel, so didn’t have this issue. My particular wheel did not extend past the bristles around the shield. I had to press down a lot to get the wheel to even contact, and then it barely took anything off. After trying to trim down the bristles unsuccessfully, I ended up pounding them out with a hammer and screwdriver. This actually ended up working really well for me. The hose adapter doesn’t sit very well in the dust shield. So plan on that falling out a lot. After the above modifications, it worked quite well, minus the hose adapter issues mentioned. Even without the bristles, dust was almost all sucked up with my shop vac. So do I recommend this? Depends. If you just want to buy the cheapest one and are fine with heavily modifying it to work for you, have at it. If you want something that works out of the box? Move on and find another.

The instructions are so vague as to be useless. I tried to follow the instructions but no matter what I did, it would not seat securely to my Metabo. It ended up at a slight angle that eventually melted the inner ring of the shroud, causing the door mechanism to melt into a permanent open position in just 5 minutes of grinding. This definitely could be user error, but instructions that made sense with better diagrams (they're TINY and not clearly labelled!) would have helped a lot. UPDATE: The seller reached out and refunded me, which saved me a trip to return it. I appreciate this and have raised my review rating. After further researching other dust shroud products (some of which helpfully include pictures of compatible grinder measurement ranges), I believe that there aren't any good options for the Metabo G12SR4 - the part of the shaft where the shrouds must connect is too short to offer a stable connection, which eventually caused the melting issue I experienced. I eventually jury-rigged a stable connection using Instamorph moldable plastic and string. If I were to do this all over again, I'd just buy a different angle grinder :(

This was a great purchase and I'm so glad I ordered it to help with a flooring project. The ceramic tiles in a portion of our home were over 40 years old and cracking in many places. It wasn't safe. Before I could lay down some vinyl plank flooring, I needed to rip the old tiles up. I had a long-handle heavy-duty metal chisel that was great at separating the tiles from the floor but it left a very bumpy and uneven layer of thinset which needed to be removed and smoothed out. This tool did the job great. It was very easily fit to my Skil Pwrcore Angle Grinder and was very easy to use on the wooden subflooring. I did need to purchase an adapter to get the vacuum attachment to fit the hose for my shop vac but other than that, I had absolutely zero issues with this product and would easily recommend it to someone needing it for the same purpose.

Used with a Crafstman 4.5 angle grinder and a Diamabrush disc. Did not seat correctly or solidly on the grinder. Interfered with Diamabrush and really was not wide enough to prevent dust. Melted, seized. Blade dislodged on Diamabrush on top of it. Horrible experience. Should not have gone for the cheap option and instead purchase the Diamabrush Diat Protector for $79. I wasted time and money but I did learn a lesson. Also, dust outlet does not fit Ridgid shop vac hose.

We redid a set of concrete walls that had bulged and cracked due to water getting in and swelling the rebarb. The Mason was pretty good but it's not all that easy to get large 2 foot patched of concrete perfectly level. I got this tool to see what it could do and it came through perfectly. We hooked it up to a DeWalt 9 gallon shop Vacuum to control the dust and to my amazement there was zero detectable dust. The Blade cut into the concrete at about 1/32" per pass with light touch and about an 1/8" with a hard press. Very controllable for leveling out the concrete. So far we have done about three patched ot areas with each one about 2ft squared. No problems with level cutting and dust. I just bought another unit because the job is big and we don't know if it will last the whole way through. So far at this price and the results I am getting I am more than happy to buy an extra unit.

I bought this to use while I leveled some high spots in my concrete floor (indoors). My vacuum isn't very powerful but it still ate up all the concrete dust that this shroud captured. Minimal clean up. It made the job super easy. It fit my Dewalt grinder without issues. It was relatively easy to install with the parts provided. It is very sturdy.

Fait sur mon grinder de canadien tire ( mastercraft). Plusieurs adapteurs pour l'installation et pour les balayeuse ! Recommande à 100%

No ofrecen nada más de lo que anuncian… pero al usar te das cuenta porque es que funcionan. En humeo o en seco funcionan para lo que fueron hechas.

It works very well

Facil de instalar a cualquier esmeril angular de 4.5" , cumple con su función al 100% ... Excelente Precio.