Rugged Case Armor for Samsung-Galaxy-Z-Fold-3 w/ Built-in [Kickstand] [S Pen Holder] [Screen Protector] [Hinge Protection], Heavy Duty Shockproof Protective Cover NOT FIT Z Fold 4/2 (Black)

If you own a Z fold phone, then you know how dangerous it is to drop that phone. I put off buying this phone because I was so worried about dropping it and breaking it, cracking the screen, breaking the folding mechanism, etc. once I found this case I bought the phone. This case is amazing. It looks good it’s very sturdy. Fully functional does not limit anything on the phone. One of the most common issues I’ve had with third-party cases is that the limit chargers from plugging all the way in. That is definitely not the case here every function button etc. on the phone is fully accessible. I LOVE THIS CASE!

Very strong ,durable case , does exactly as it says

This is the fifth case I've purchased for my zFold3. I've had thin, leather, plastic and now this. My biggest issue with my prior cases was in the placement of the S pen holder. I liked this one because the holder was on the spine/hinge. However, it adds bulk (the case/phone is extended about an inch to accommodate the pen holder) and is not flat when the phone is opened. The built-in stand/finger holder is a plus and the overall case has a good, sturdy feel. The front screen protector is a disappointment since it's just plastic and not tempered glass. Also, if you have a tempered glass protector, it won't fit nor function properly under the case. I liked the color (I got white), but the bulk is questionable. When I was at Disneyland with my brother-in-law, he asked me if my case was a power bank. Yes, it's that big. However, for now, the added bulk and built in stand and S pen holder makes this case a better option than most.

BEST CASE EVER FOR MY ZFOLD3. The spine of my phone is protected because the design of the hinge on the case works independently from the case when closing the phone. This means that when I open and close the phone, the spine closes after. It does not work on a spring that breaks. I've tried those. I've also tried cases with a magnetic hinge. This case allows you to carry the S pen, and it won't fall out. Smart engineering.

This is by far the best case for rhis phone available currently. The $80 brand of almost this exact same product ripped the plastic trim off my screen because of the placement of the tabs that come over the edge to hold in place. $250 deductible to replace the whole phone since these aren't eligible for Asurion's screen replacements whatsoever... and the company claimed no fault. Real nice. No such BS with these cases, they fit snug and dont need teeth to bite into your $2200 phablet and ruin things. Handles drops okay. Doesn't force you to use some cheap, flimsy, defective plastic screen cover in the front case. My main issue: the posts to hold the kickstand slats in place that are situated behind, on the inside, wre smaller than 1/2 a grain of rice and snap off easy peasey. Highly under-engineered, for something that's likely to go through 10,000 motions over the course of a couple years. I used the stand as a sort of finger ring to keep the phone stable in my hand, especially when taking photos (i rarely use this shut, with the front screen). It seems the slightest shearing motions just broke those little tabs right off the plastic and now this case can't be set down when open without wobbling over or falling off the edge of wherever, can't be set down to orient it for video playbsck, and can't be used in wireless chargers or any form of cradle device when open. So, basicslly worthless aside from raw drop protection. Three stars because it does achieve that part well. Though, notably, The screen doesn't actually close fully with this case on, because of the height added by the edges. So sometimes it's a bit... Floppy? Idk how to say. It makes a nice click when you shut it and close the spine, but it isn't actually securely closed like it is without a case on. Manufacturer should reach out for design imorovement ideas and issue me prototypes to try out 👍 #tryitout #coolguyclub 👖

I had a Supcase Unicorn Beetle Pro for my Z Fold 3, but the hinges and other parts of the case began cracking - probably owing to dropping the phone several times onto hard surfaces. I really like the UB Pro, but money is tight and I didn't want to spend another $70+ USD on a new one. In shopping Amazon for similar cases, I found this one. At first glance, this case looks nearly identical to the UB Pro. Upon closer examination, there are some thoughtful differences that make me prefer this case. First, the volume rocker buttons are not covered. One of my pet peeves with the UB Pro was that the volume buttons were covered by the case and were very difficult to press. They did, somewhat, break in over time, but I still prefer bare buttons. Although the bare buttons might get scratched or scuffed, the design of the case makes it impossible to impact the bare buttons, if the phone is dropped. The other nice touch is the hinge cover is spring-loaded such that the hinge can be used as a stand, allowing the phone to be oriented in either of two ways, with a slight difference in the angle. The UB Pro hinge cover only lets the phone rest in one position. Otherwise, if you had this case and the UB Pro side-by-side and you weren't familiar with either, you'd be hard pressed to figure out which one is which. Both this case and the UB Pro come with a plastic, front screen protector built-in. I, however, don't like plastic protectors, so I knocked it out of the case and applied a tempered glass screen protector. If you choose to do the same, I found that applying the screen protector, after the case is on the phone, using the case as an installation guide works pretty well. As you may have read, this case also provides S Pen storage in the hinge cover, as well as a kick-stand that can help hold the phone in a variety of positions, with the phone open or folded. The cut-outs for the mics, speakers, and controls are all pretty good. One of the mics isn't 100% perfect, but it works fine. The charge port might be too small of an opening, depending on your cable. Some of mine fit perfectly, while others get stuck on the upper part of the opening and don't seat all the way. I used a file on my Leatherman tool to shave that part of the case a little to fix the problem. All in all, I would 100% recommend this case instead of the UB Pro. This case is, roughly, 1/3 the price, but provides every bit of protection the UB Pro does, without breaking the bank. Strongly recommended!

This case is great. It scared me in the beginning. It was a little tight putting it on. However it went on has been great. I like the fact you can use any Qi charger without removing the case. The case is very durable. It was worth the price. The onlynproblem I've got is replacing that case when upgrade our phones.

This has been a very durable case in the sense that it has protected my phone every single time I have dropped it. I also really like that I have a place to keep my stylus. Thr kickstand on it though is a little brittle. Mine broke off not to long after buying it. The other thing I have ran into with this case, is that there are no decent CAR MOUNTS to use with it. Most of the car mounts are for the flat backed cases. Since this has a spot for the stylus, the back has a bulge essentially when opened; this, it won't properly fit in any car mounts. I know it's a "first world problem"; but it would be nice if there was a compatible car mount for this case.

This case is poorly done don't fit properly Very cheaply made

جيد جدا

Esta muy buena la funda bastante resistente y el aro para que se sostenga es de buena calidad por el precio

es de buena calidad

Queda perfecto