Thermalright TL-C12C-S X3 CPU Fan 120mm ARGB Case Cooler Fan, 4pin PWM Silent Computer Fan With S-FDB Bearing Included, up to 1550RPM cooling fan（3 quantities）

Ok, maybe jumping the gun here... As I haven't actually tested them live in a system. (cable management left then I'm good to go) I've had non-Rgb cosair / noctura fans in my system but decided to go RGB. I don't want to pay £20-30 for a branded fan. My case exactly great for airflow so the more fans, the merrier. (previous fans were steals from ebay) Seen these by chance. 3 for £13? Couldn't find much reviews, hence why I'm doing this review. It seems to eveything as promised. 3 x 120mm argb fans. These are PWM, and possible to daisy chain others. Likewise with the argb, can be dasiy chained too. Fan's look good quality with rubber vibration pads. I think the price is either an error or moreso Thermal Right are looking to gain some attention. If its the latter then it's worked. I'll update once it's actually been tested in my system. I know seems a bit silly leaving a review but I didn't want to forget to leave a review as I'm that impressed. Eveything from packaging to the actual fan. Can't find a fault. I grabbed one of their heatsinks too. (going from hyper 212 to pearless assassin) - another bargain. (Update: fans in my system, so I have in total 8 of these in my system. It was noisey but then I optimised the fan curve and runs silent. You can hear the air moving and that's it. Seems to be about 30% power to get the minimum for the fans to run). I did hear a slight tick from the fans at first but that's dissappeared. Check out the fan control software... Which is open sourced. (instead of MSI Center or something) Highly recommend. (RGB seems good too)

Needed to pick up 10 new fans due to a case change, using 140mm fans in my old case but for the new one it needed to be 120mm argb fans, didn't want to shell out £50 odd for 3 fans at a time on the known branded fans from Cooler master, Lian Li Asus and am it's really not a great case for noctua fans either as good as they are non rgb is not the way to go. After some debate I picked up these thermalright fans from a price factor, it was a no brainer, 3 for £13 and the ability the daisy chain without a controller, 10 fans installed in seconds thanks to the noctua rubber nubbin mounts and I have 10 fully working fans out of the box, all working rgb and just looks great! My pc is cooler and quiet. Top job!

For the price, these are incredible. The Daisy chaining function works perfectly, it makes setup incredibly convenient. RGB is vibrant. Airflow is adequate, as is noise. for approx£4-5 per fan there isn't much competition.

My fans on my old rig have been getting a bit rattley (well one of them has) so thought it time to replace them. While I only needed two, I thought this three pack was great value and will leave me with a spare should I need it (or maybe find somewhere else to fit it). Now full disclosure is I have still not fitted them yet after getting them just under a week ago, but for good reason. The one thing these fans lack is any kind of fitting instructions. Now I am sure the more experienced PC builder will know what cable is for what, to anyone with less experience not having instructions is going to leave them bewildered. I have done a lot of maintenance on my PC myself but have never fitted chassis fans before so when I looked at these fans I was struggling initially to get my head around what goes where and how I can run them without having a fan hub (daisy chaining is the solution). Now it took me, a semi experienced PC nerd a lil while to work things out, but I can imagine someone with less experience would still be scratching their head. It really would not kill the manufacturer to either supply instructions in the pack or at least a link to an online set of instructions or video. I recently bought a Be Quiet CPU cooler and not only did it come with assembly instructions but even told me exactly what socket to use on the motherboard (I mean it was pretty obvious removing the old cooler first, but would be a nice touch for someone building from scratch). Obviously the more experienced you are, the less need there is for instructions but I think you need to cater to all levels. I will get around to fitting them soon, but think I wanna go the hub route anyway now and not an urgent job. Just originally thought while I was fitting my new SSD I might as well do other work that was needed.

I recently upgraded my PC with the Thermalright TL-C12C-S X3 CPU Fan 120mm ARGB Case Cooler Fans, and I am thoroughly impressed. Firstly, the cooling performance is outstanding. These fans keep my system running cool even during intense gaming sessions and heavy multitasking. The airflow is excellent, and my CPU temperatures have noticeably dropped, which has improved overall system stability and performance. The ARGB lighting is a major highlight. The colors are vibrant and add a stunning visual appeal to my PC case. The lighting effects are customizable, allowing me to sync them perfectly with my other ARGB components for a cohesive look. The result is a visually striking setup that stands out. Installation was straightforward. The fans come with clear instructions and all the necessary mounting hardware. They fit perfectly in my case and were up and running in no time. The build quality is top-notch, with durable materials that give me confidence in their longevity. The noise level is impressively low, even at higher speeds. The fans operate quietly, which is a significant plus for maintaining a pleasant environment while gaming or working.

I bought the 3-pack of these fans - for <£15 - and honestly after using them I think the value for money is just bonkers (good)! I don't actually use the RGB features myself as I prefer a sleeper-build style but I tested them before turning it off. They're versatile because they each have their own dedicated connectors but ALSO integrated daisy-chaining connectors so I could link them from one header and pass it through so they're controlled together - this opened up lots of options for how to configure them. They have evo foam pads in the corners which seems to work well at reducing vibration noise where I've screwed it to my chassis (I feel this is noteworthy because I've bought noctua's in the past and was shocked they didn't include these and you have you buy the corner pads separately - so including them with these Thermalrights adds to the value to me). I have these tuned quite low-speed, lining the bottom of my densely packed [[asin:B0D4VLZXSS Dan A3] case, and they help keep a quite steady positive pressure / air flow even when the actively cooled components are idle - which I think is important to keep the passively cooled items under control in my build because its so dense.

These fans are so close to being great. They perform really well, keeping everything cool. The RGB is very good and very even across all fans so your custom colours look great. At low speed they are very quiet which is also good. My issue is that once they get into the 1200-1500 rpm range, they have this really annoying whine sound. It's kind of like when you blow over the top of an empty bottle. Sometimes this can happen with the odd fan and that's fine. Problem I have is all four I installed have the same whine. I unplugged them one by one to see if I could isolate the fan with the whine. Only when all of them were unplugged did the whine go away. Testing each one individually, I can hear this noise, so when you have all 4 going, the noise is amplified. I'm going to replace them with something else as I can't trust that they won't all be like that and the noise itself is very annoying.

Added to a kids pc the back fan is corsair my usual brand these 3 went up front. Honestly from my point of view there is no difference between these cheap fans and the sp120 corsair. They are quiet powerful and appear almost identical the colours are great and rgb is on par with corsair. Best thing is you can daisy chain these for pwm as each fan has a passthru meaning only 1 header needed for equal control of all 3. Easily one of the best value pc buys ive made on here great for spicing up a boring case and adding airflow

Sehr gute Lüfter Nicht laut aber gute Kühlung Hab die jetzt seid 2 Jahren in meinem pc und sie laufen immernoch wie am ersten Tag