KCT Nano-Texture Glass Screen Protector for Galaxy Tab S10/S9/S8 Ultra

Installation was a snap. The positioning frame made alignment sure easy. It was very cool how you pull the tab and it sucks all the bubbles out. Left only 2 very small ones near edge, which squeegeed right out. I love how I didn’t buy it so much for protection (but that’s a big p,us). I really wanted to cut down on glare, as I use my iPad out in sun often. It does an excellent job cutting glare without much loss in clarity. Also, it’s nice to not see fingerprints. Excellent product all around. Oh, and it’s well priced. Highly recommend

This surprised me, it’s exactly what you want for a matte finish that doesn’t feel like a rough piece of tape, it’s still smooth but provides enough of a tactile feel for the pen. The sharpness is retained much better than any other matte protector I’ve tried, the application frame and tools make it easy. Wish it were slightly cheaper but it’s a good product.

It is worth every penny! The quality is above the others. It really protects from reflections. I can use my tablet anywhere now. I am extremely happy with this screen protector. The texture is silky and made my tablet feel like a more deluxe product. It was very easy to install. Highly recommend.

I had initially planned on writing a first a 5 star review, then a 2 star review, and now this 1 star review, as I THOUGHT my initial problems were user error during installation. I cleaned my screen vigorously, and applied the protector. Ridiculously easy to use. Then noticed that there was a small tiny air bubble that would NOT come out. No big deal I thought, obviously I missed a bit of dust or one got in before I could seal it. I could live with it. Then after about a week and a half of use that the corners were starting to lift slightly. I was annoyed, but since I generally have greasy hands, I assumed that grease had worked its way. I tried to squeeze the screen protector back down, but nothing. Over the following week the issue got worse and worse till about 3 weeks after installation, the entire screen protector just slid right off. After checking, I discovered that there was no grease on the screen like I had been expecting, and concluded the protectors adhesive had simply failed.

I've tried a few products looking for primarily a good anti-glare and yet smooth screen protector that also does not alter the sharpness of the image or reduce the brightness too much and this is one is the best by far. I'm very picky with screen protectors and this one really suits my needs perfectly in all respects. It is also very easy to install (and you can remove bubbles or dust easily if those are present). It even works well with my magnetic privacy screen protector on top. I rarely rate products but this one deserves 5 stars across the board!

I installed this the first day I got it. Installation was beautiful- exactly as shown in the video and definitely the easiest Ive ever experienced by far. The slight increase in price over other brands is by far worth it to have the tool that helps to flawlessly apply the screensaver with! I’ve messed up the installation in the past, making the screen protector either look awful or making it all together unusable, so I’m thankful that this tool is a guarantee that you’ll get it on right! HOWEVER… when my iPad got set down I guess JUST A TINY bit harder than normal by my 3yo, I was SHOCKED to see that this screen had ALRDY completely shattered, the day after it had been delivered. So this happened EXTREMELY easily… and not after a bunch of pre- stressors to the screen as I had literally just installed it. The flyer insert from the seller that was included in the package said to reach out to them if anything happens to the screen and they “will always replace it”… so I did that…and actually I had realized at that point that I didn’t even order the correct screen to begin with. I had meant to order the “paper feel” version also I’d been wondering why this screen was so smooth (it’s VERY nice and silky though I will say!) but I was looking for a paper texture to use with my Apple Pencil.. so I inquired about getting a replacement screen, as per their flyer and also asked if I could actually exchange it for the correct Product- although I do realize that part was MY mistake, so I did mention that I could process the exchange myself of course, via Amazon, it if they preferred. I received one reply back, asking me to send them a picture of the issue. I emailed it back to them and am currently awaiting their reply. I will update my review after situation has concluded. Update: Many emails went back and forth between me and seller, who at first told me that I was incorrect about what their flyer said but after I sent them a picture of it, they hesitantly agreed to replace the screen protector, or rather they gave me a refund so I could purchase the actual screen id meant to buy in the first place… which is extremely nice of them, they definitely didn’t have to do all that! Let me also say that I would not usually just expect a company to replace their product that broke in my possession but in this case I did only because their flyer promised life time replacements… which I knew would be too good to be true, but I am thankful they followed through on their word, even if it was unintentionally stated. And now the my screen is a texture I’m used to, and if sooooo much better to work on w the Apple Pencil! Thank you seller!

I looked carefully at all others for my new Tab S10 Ultra. The protector checks all of the boxes for me, and is excellent with smoothness, and anti glare. The easy installation needs improvement, as there are issues. Read on for possible tips. I set up in my bathroom which is typically the most dust free room in one's home. I used a CLEAN very large nylon cutting board as a work surface. I had read instructions, and watched the videos. I had the ceiling exhaust fan running for 15 mins, and slowly opened the door when entering so as not to put surrounding air in motion. Kept fan on. 1. I cleaned the tablet thoroughly. 1st with glass cleaner on paper towels, next with 90% rubbing alcohol on PLAIN DRY baby wipes. (I use these for cleaning optics on high end telescopes and astrophotography gear). 2. I used a bright LED flashlight to look for dust particles against the turned off dark tablet screen. Any strays were brushed away with a dry cotton baby wipe. I also used one of the supplied dust stickers. 3. When peeling off the 1st film, keep it facing the floor, so as to help keep dust free, and peel slowly. Make sure of your orientation, and place over tablet AFTER you have checked it for dust again. 4. Touch the indicated area on left to start contact with glass, and WAIT until further suction has stopped! 5. Pull the RED tab SLOWLY in a slightly side to side motion, not a straight pull. WAIT until all attraction to glass has stopped!!!! In my case, a small fragment of the rubberized ribbon remained under the glass at the instant it released (see photo). I used a small CLEAN stainless steel spatula to get under the glass, then twisted gently. The glass will lift fairly easily. I used the dust removal tape to snatch it, and let the glass settle again. I had bubbles at the 4 corners, and 2 about 1 1/2 inches from the right end, above and below the horizontal center. The corner bubbles were worked out quite easily. The 2 remaining wouldn't go away. I looked with the light and a magnifying glass. They appeared as bubbles, but with a defined center point. I grabbed the spatula, and lifted the glass again. It still lifted easily. I used the dust tape sticky side up and pressing the underside of the glass slightly toward the spatula. Removed both obstructions, let the glass settle, and worked out the corner bubbles. I was dust, fragment, and bubble free! Turned out these were glass fragments embedded into the adhesive on the underside of the glass. Tells me that the manufacturing needs improvement in cleanliness. The rubberized ribbon needs improvement, it shouldn't fragment. My alignment isn't perfect. Top and both ends are perfect. Bottom edge is approx 2 mm short from being flush. FWIW, The spatula I used is the type for artists mixing paint, in my case for removing objects from my 3D printer bed. I can also recommend having a can of compressed air, such as for cleaning computers, in case it is needed. Suction cups may work as well for lifting glass. I didn't think of them until after I was done. Above all, be prepared, and take your time. This is not a 5 minute job. I spent about 45 minutes, but now have a perfect screen.

Works great, worth the money!

great

Tiene un acabado mate muy suave y sedoso al tacto y elimina bastante bien los reflejos, es perfecta!

This was really easy to install on my Galaxy S9 Ultra. One or two extremely tiny bubbles near the edges but that's fine. I had gotten the official Samsung anti reflective screen protector before this and that was horrid. It worked great but the design and installation mechanism was flawed and was swarmed with bubbles and crease. Found this on amazon and thought I'd give it a try and I followed the instructional video. It worked perfectly and feels great. The installation mechanism is new to me but was awesome.

This screen protector is beyond perfect. I've used matte screen protectors before for tablets, and they always make the screen fuzzy and the blacks aren't as saturated. This is right between matte and gloss, it's like a satin finish and the s pen feels WAY better with this on than other glossy glass protectors. And it's so smooth. Buy it, you won't regret it! Colors still look great.

El paquete llega completo, todo bien empacado, una presentación excelente y el sistema para colocar el cristal en bastante sencillo. Claro que aparecen algunas basuritas pero es muy normal teniendo en cuenta que es una pantalla enorme, no es como en un celular que tienes mas control de l polvo. A pesar de eso, la calidad del cristal es brutal, yo lo buscaba específicamente para dibujo y me vino excelente, no se ralla con la pluma (tengo puntilla de titanio), la suavidad del cristal es incluso mejor que la pantalla original y los reflejos se reducen un 80%, para ilustración de verdad que es un cambio positivo enorme, justo lo que esperaba