BeneStellar for Garmin Vivosmart HR Band, Replacement Soft Silicone Bracelet Sport Strap Wristband Accessory with Screwdriver for Garmin Vivosmart HR(No Tracker, Replacement Bands Only)

While searching for a band to replace the one that didn't fit (see original review below) I read several reviews that said the screws and a piece of plastic had to be removed from the button-end of the HR device before the band could be attached.This worked, but the other side of the band still didn’t fit. It then occurred to me that I might have to remove the screws and a second piece of plastic from the other end of the device before I could attach the band. This worked!!The SN of my Vivosmart HR fitness tracker begins with 4JE. The description indicates the band won’t work for SNs beginning with 4JE, but one of the answers says it will.Original Review: The replacement band didn't come close to fitting. Very disappointed.

Got my band and when i starting putting it together i was like oh no it is not going to fit then realize u had to remove a small casing when you remove the screws then put on the new band and it fit perfect

I really like this bad, with a few caveats:The "button-side" strap is longer than my original strap, which was size small, so probably this was molded from the L/XL original. Also, it did not fit onto the watch until an extra plastic piece (on the garmin) was removed. It came off all on its own for me, actually, so that wasn't a problem.The "buckle-side" strap fits the charging side of the device well, but the screws alone are not enough to keep it flush. I'm not sure if it's a difference in the mold or just a squishier, stretchier silicone. I tried super-glue at first but it did not stick to the silicone band at all (and be warned, depending on what superglue you try, it might "melt" the plastic of the garmin). Next I tried a little dab of leftover aquarium-safe silicone sealant, and that's done the trick of keeping it nice and tight.The included screws and screwdriver were very handy! I could have reused the original screws, but they were so filthy, and so tiny and hard-to-clean, that I just used the new ones. Why not?It's comfortable, vividly-colored, and does the job of keeping my garmin on my wrist. Could be improved but it's not too bad.(I have the vivosmart HR S/N 4JE631718)

Nice color (Aqua), easy to install with screwdriver included. Strap is much larger than the original Garmin band and the material feels softer. I might have to cut the band shorter or loop it.UPDATE - The seller contacted me and offered to return the product if I was not completely happy. I chose to keep the product rather than search for another similar item. This one is the exact color and softness I was hoping for. Plus, I was able to stretch the loop enough to move farther up the band and hold the end in a good place. Very happy with the results. Knowing that the seller cared about my satisfaction was a big factor. I know that this company will stand behind their product. Great customer service!

This fits my Garmin Vivosmart HR with a S/N prefix of 4VB. It says in the upper description that it will NOT fit a 4VB prefix. They are wrong and I'll describe why. There is a insert on the factory installed band. That insert is made of hard plastic and sometimes won't come off easily with the elastic band. So some people experience that problem thinking it does not fit. If you remove the old band, make sure that hard plastic stub also comes off from the body. As long as you have that insert (hard plastic portion) removed, this band fits and installs easy and fits just fine.I can't comment on the longevity of the band yet since I just received it so I'm rating it a 4 for now. Again, it does fit the Garmin Vivosmart HR with a suffix of 4VB

I was afraid to purchase for my Garmin VivoSmart HR serial number starting with 4JE as others said did not fit. This fits just fine and I didn't have to remove any additional parts, not that my VSHR had any additional parts to come off. Could the tolerances be a bit tighter, yes, but I am not paying 3.5 times as much directly from Garmin for an exact match. The band length is size large so I have 2.25 extra inches past the buckle. I could cut the length but I just tuck it into the tail loop. The material is silicone and not whatever the OEM plastic is so it has a different feel. If the silicone was a bit stiffer, it would hold tighter tolerance to the watch. Works for me but does attract lint since silicone is a bit tacky, but at the same time keeps it from twirling on my wrist and I don't need to sinch it up so tight.

First I think my rating is more like 4 1/2 stars. The fit is not as tight as the original but it is very close - 1/2 star. At first I didn't think it fit at all but as I was trying to put it on a hard plastic part of the original band fell off. At that moment I realized two things. The hard plastic piece was bonded to the original band and that bonding is what fails. Second, some of the reports of not fitting at all may be because the hard plastic part of the original band is still in place. Once you remove that piece the fit is almost perfect because the replacement does not need it. My buckle side failed first and I did have a hard time with the screws. I used the original screws so I don't know if the replacement screws will fit or not, I'm just keeping them as spares. What I found out while trying to replace the buckle side band was the angle that the screws go in needs to be correct or you will struggle. When the adjustment side failed I was able to get the screws in on the first try. The band I received did not seam any thicker than the original so my button is the same as before. The original band is a glossy slick black to match the watch itself where as the replacement is a matte black that has a softer texture. The only thing I would change is the chrome buckle. I like the originals black chrome better.

The band worked great until it fell apart. I got this in July & now in September, (only 2 months) I have to buy a new one.

I bought this on may 27th 2018. It’s already broke

Did not fit at all, was way to cheap and screws were too small

Bands are really long but they hold up well and get the job done

For the first week, the replacement band worked very well and came as expected. It is not an exact match to the original, but close enough.

Was not compatible/didn't fit. Returned it.

Band was kinda kind. I could’ve went with a size under

Wristband fit perfectly and the price was very resonable

It did not fit correctly and left parts of the tracker exposed.

After reading reviews on other replacement VivoSmart HR bands, i found that there is a second layer of plastic covering where the long side of the band connects.